Performance analysis of feedback-free collision resolution NDMA protocol

To support communications of a large number of deployed devices while guaranteeing limited signaling load, low energy consumption, and high reliability, future cellular systems require efficient random access protocols. However, how to address the collision resolution at the receiver is still the main bottleneck of these protocols. The network-assisted diversity multiple access (NDMA) protocol solves the issue and attains the highest potential throughput at the cost of keeping devices active to acquire feedback and repeating transmissions until successful decoding. In contrast, another potential approach is the feedback-free NDMA (FF-NDMA) protocol, in which devices do repeat packets in a pre-defined number of consecutive time slots without waiting for feedback associated with repetitions. Here, we investigate the FF-NDMA protocol from a cellular network perspective in order to elucidate under what circumstances this scheme is more energy efficient than NDMA. We characterize analytically the FF-NDMA protocol along with the multipacket reception model and a finite Markov chain. Analytic expressions for throughput, delay, capture probability, energy, and energy efficiency are derived. Then, clues for system design are established according to the different trade-offs studied. Simulation results show that FF-NDMA is more energy efficient than classical NDMA and HARQ-NDMA at low signal-to-noise ratio (SNR) and at medium SNR when the load increases.Peer ReviewedPostprint (published version

Thirty Years of Machine Learning: The Road to Pareto-Optimal Wireless Networks

Future wireless networks have a substantial potential in terms of supporting a broad range of complex compelling applications both in military and civilian fields, where the users are able to enjoy high-rate, low-latency, low-cost and reliable information services. Achieving this ambitious goal requires new radio techniques for adaptive learning and intelligent decision making because of the complex heterogeneous nature of the network structures and wireless services. Machine learning (ML) algorithms have great success in supporting big data analytics, efficient parameter estimation and interactive decision making. Hence, in this article, we review the thirty-year history of ML by elaborating on supervised learning, unsupervised learning, reinforcement learning and deep learning. Furthermore, we investigate their employment in the compelling applications of wireless networks, including heterogeneous networks (HetNets), cognitive radios (CR), Internet of things (IoT), machine to machine networks (M2M), and so on. This article aims for assisting the readers in clarifying the motivation and methodology of the various ML algorithms, so as to invoke them for hitherto unexplored services as well as scenarios of future wireless networks.Comment: 46 pages, 22 fig

Protocol for Extreme Low Latency M2M Communication Networks

As technology evolves, more Machine to Machine (M2M) deployments and mission critical services are expected to grow massively, generating new and diverse forms of data traffic, posing unprecedented challenges in requirements such as delay, reliability, energy consumption and scalability. This new paradigm vindicates a new set of stringent requirements that the current mobile networks do not support. A new generation of mobile networks is needed to attend to this innovative services and requirements - the The fifth generation of mobile networks (5G) networks. Specifically, achieving ultra-reliable low latency communication for machine to machine networks represents a major challenge, that requires a new approach to the design of the Physical (PHY) and Medium Access Control (MAC) layer to provide these novel services and handle the new heterogeneous environment in 5G. The current LTE Advanced (LTE-A) radio access network orthogonality and synchronization requirements are obstacles for this new 5G architecture, since devices in M2M generate bursty and sporadic traffic, and therefore should not be obliged to follow the synchronization of the LTE-A PHY layer. A non-orthogonal access scheme is required, that enables asynchronous access and that does not degrade the spectrum. This dissertation addresses the requirements of URLLC M2M traffic at the MAC layer. It proposes an extension of the M2M H-NDMA protocol for a multi base station scenario and a power control scheme to adapt the protocol to the requirements of URLLC. The system and power control schemes performance and the introduction of more base stations are analyzed in a system level simulator developed in MATLAB, which implements the MAC protocol and applies the power control algorithm. Results showed that with the increase in the number of base stations, delay can be significantly reduced and the protocol supports more devices without compromising delay or reliability bounds for Ultra-Reliable and Low Latency Communication (URLLC), while also increasing the throughput. The extension of the protocol will enable the study of different power control algorithms for more complex scenarios and access schemes that combine asynchronous and synchronous access

Towards Massive Connectivity Support for Scalable mMTC Communications in 5G networks

The fifth generation of cellular communication systems is foreseen to enable a multitude of new applications and use cases with very different requirements. A new 5G multiservice air interface needs to enhance broadband performance as well as provide new levels of reliability, latency and supported number of users. In this paper we focus on the massive Machine Type Communications (mMTC) service within a multi-service air interface. Specifically, we present an overview of different physical and medium access techniques to address the problem of a massive number of access attempts in mMTC and discuss the protocol performance of these solutions in a common evaluation framework

Quantum search algorithms, quantum wireless, and a low-complexity maximum likelihood iterative quantum multi-user detector design

The high complexity of numerous optimal classic communication schemes, such as the maximum likelihood (ML) multiuser detector (MUD), often prevents their practical implementation. In this paper, we present an extensive review and tutorial on quantum search algorithms (QSA) and their potential applications, and we employ a QSA that finds the minimum of a function in order to perform optimal hard MUD with a quadratic reduction in the computational complexity when compared to that of the ML MUD. Furthermore, we follow a quantum approach to achieve the same performance as the optimal soft-input soft-output classic detectors by replacing them with a quantum algorithm, which estimates the weighted sum of a function’s evaluations. We propose a soft-input soft-output quantum-assisted MUD (QMUD) scheme, which is the quantum-domain equivalent of the ML MUD. We then demonstrate its application using the design example of a direct-sequence code division multiple access system employing bit-interleaved coded modulation relying on iterative decoding, and compare it with the optimal ML MUD in terms of its performance and complexity. Both our extrinsic information transfer charts and bit error ratio curves show that the performance of the proposed QMUD and that of the optimal classic MUD are equivalent, but the QMUD’s computational complexity is significantly lower

Multiple Access for Massive Machine Type Communications

The internet we have known thus far has been an internet of people, as it has connected people with one another. However, these connections are forecasted to occupy only a minuscule of future communications. The internet of tomorrow is indeed: the internet of things. The Internet of Things (IoT) promises to improve all aspects of life by connecting everything to everything. An enormous amount of effort is being exerted to turn these visions into a reality. Sensors and actuators will communicate and operate in an automated fashion with no or minimal human intervention. In the current literature, these sensors and actuators are referred to as machines, and the communication amongst these machines is referred to as Machine to Machine (M2M) communication or Machine-Type Communication (MTC). As IoT requires a seamless mode of communication that is available anywhere and anytime, wireless communications will be one of the key enabling technologies for IoT. In existing wireless cellular networks, users with data to transmit first need to request channel access. All access requests are processed by a central unit that in return either grants or denies the access request. Once granted access, users' data transmissions are non-overlapping and interference free. However, as the number of IoT devices is forecasted to be in the order of hundreds of millions, if not billions, in the near future, the access channels of existing cellular networks are predicted to suffer from severe congestion and, thus, incur unpredictable latencies in the system. On the other hand, in random access, users with data to transmit will access the channel in an uncoordinated and probabilistic fashion, thus, requiring little or no signalling overhead. However, this reduction in overhead is at the expense of reliability and efficiency due to the interference caused by contending users. In most existing random access schemes, packets are lost when they experience interference from other packets transmitted over the same resources. Moreover, most existing random access schemes are best-effort schemes with almost no Quality of Service (QoS) guarantees. In this thesis, we investigate the performance of different random access schemes in different settings to resolve the problem of the massive access of IoT devices with diverse QoS guarantees. First, we take a step towards re-designing existing random access protocols such that they are more practical and more efficient. For many years, researchers have adopted the collision channel model in random access schemes: a collision is the event of two or more users transmitting over the same time-frequency resources. In the event of a collision, all the involved data is lost, and users need to retransmit their information. However, in practice, data can be recovered even in the presence of interference provided that the power of the signal is sufficiently larger than the power of the noise and the power of the interference. Based on this, we re-define the event of collision as the event of the interference power exceeding a pre-determined threshold. We propose a new analytical framework to compute the probability of packet recovery failure inspired by error control codes on graph. We optimize the random access parameters based on evolution strategies. Our results show a significant improvement in performance in terms of reliability and efficiency. Next, we focus on supporting the heterogeneous IoT applications and accommodating their diverse latency and reliability requirements in a unified access scheme. We propose a multi-stage approach where each group of applications transmits in different stages with different probabilities. We propose a new analytical framework to compute the probability of packet recovery failure for each group in each stage. We also optimize the random access parameters using evolution strategies. Our results show that our proposed scheme can outperform coordinated access schemes of existing cellular networks when the number of users is very large. Finally, we investigate random non-orthogonal multiple access schemes that are known to achieve a higher spectrum efficiency and are known to support higher loads. In our proposed scheme, user detection and channel estimation are carried out via pilot sequences that are transmitted simultaneously with the user's data. Here, a collision event is defined as the event of two or more users selecting the same pilot sequence. All collisions are regarded as interference to the remaining users. We first study the distribution of the interference power and derive its expression. Then, we use this expression to derive simple yet accurate analytical bounds on the throughput and outage probability of the proposed scheme. We consider both joint decoding as well as successive interference cancellation. We show that the proposed scheme is especially useful in the case of short packet transmission

Doctor of Philosophy

dissertationThe continuous growth of wireless communication use has largely exhausted the limited spectrum available. Methods to improve spectral efficiency are in high demand and will continue to be for the foreseeable future. Several technologies have the potential to make large improvements to spectral efficiency and the total capacity of networks including massive multiple-input multiple-output (MIMO), cognitive radio, and spatial-multiplexing MIMO. Of these, spatial-multiplexing MIMO has the largest near-term potential as it has already been adopted in the WiFi, WiMAX, and LTE standards. Although transmitting independent MIMO streams is cheap and easy, with a mere linear increase in cost with streams, receiving MIMO is difficult since the optimal methods have exponentially increasing cost and power consumption. Suboptimal MIMO detectors such as K-Best have a drastically reduced complexity compared to optimal methods but still have an undesirable exponentially increasing cost with data-rate. The Markov Chain Monte Carlo (MCMC) detector has been proposed as a near-optimal method with polynomial cost, but it has a history of unusual performance issues which have hindered its adoption. In this dissertation, we introduce a revised derivation of the bitwise MCMC MIMO detector. The new approach resolves the previously reported high SNR stalling problem of MCMC without the need for hybridization with another detector method or adding heuristic temperature scaling terms. Another common problem with MCMC algorithms is an unknown convergence time making predictable fixed-length implementations problematic. When an insufficient number of iterations is used on a slowly converging example, the output LLRs can be unstable and overconfident, therefore, we develop a method to identify rare, slowly converging runs and mitigate their degrading effects on the soft-output information. This improves forward-error-correcting code performance and removes a symptomatic error floor in bit-error-rates. Next, pseudo-convergence is identified with a novel way to visualize the internal behavior of the Gibbs sampler. An effective and efficient pseudo-convergence detection and escape strategy is suggested. Finally, the new excited MCMC (X-MCMC) detector is shown to have near maximum-a-posteriori (MAP) performance even with challenging, realistic, highly-correlated channels at the maximum MIMO sizes and modulation rates supported by the 802.11ac WiFi specification, 8x8 256 QAM. Further, the new excited MCMC (X-MCMC) detector is demonstrated on an 8-antenna MIMO testbed with the 802.11ac WiFi protocol, confirming its high performance. Finally, a VLSI implementation of the X-MCMC detector is presented which retains the near-optimal performance of the floating-point algorithm while having one of the lowest complexities found in the near-optimal MIMO detector literature

Effi cient algorithms for iterative detection and decoding in Multiple-Input and Multiple-Output Communication Systems

This thesis fits into the Multiple-Input Multiple-Output (MIMO) communication systems. Nowadays, these schemes are the most promising technology in the field of wireless communications. The use of this technology allows to increase the rate and the quality of the transmission through the use of multiple antennas at the transmitter and receiver sides. Furthermore, the MIMO technology can also be used in a multiuser scenario, where a Base Station (BS) equipped with several antennas serves several users that share the spatial dimension causing interference. However, employing precoding algorithms the signal of the multiuser interference can be mitigated. For these reasons, the MIMO technology has become an essential key in many new generation communications standards. On the other hand, Massive MIMO technology or Large MIMO, where the BS is equipped with very large number of antennas (hundreds or thousands) serves many users in the same time-frequency resource. Nevertheless, the advantages provided by the MIMO technology entail a substantial increase in the computational cost. Therefore the design of low-complexity receivers is an important issue which is tackled throughout this thesis. To this end, one of the main contributions of this dissertation is the implementation of efficient soft-output detectors and precoding schemes. First, the problem of efficient soft detection with no iteration at the receiver has been addressed. A detailed overview of the most employed soft detectors is provided. Furthermore, the complexity and performance of these methods are evaluated and compared. Additionally, two low-complexity algorithms have been proposed. The first algorithm is based on the efficient Box Optimization Hard Detector (BOHD) algorithm and provides a low-complexity implementation achieving a suitable performance. The second algorithm tries to reduce the computational cost of the Subspace Marginalization with Interference Suppression (SUMIS) algorithm. Second, soft-input soft-output (SISO) detectors, which are included in an iterative receiver structure, have been investigated. An iterative receiver improves the performance with respect to no iteration, achieving a performance close to the channel capacity. In contrast, its computational cost becomes prohibitive. In this context, three algorithms are presented. Two of them achieve max-log performance reducing the complexity of standard SISO detectors. The last one achieves near max-log performance with low complexity. The precoding problem has been addressed in the third part of this thesis. An analysis of some of the most employed precoding techniques has been carried out. The algorithms have been compared in terms of performance and complexity. In this context, the impact of the channel matrix condition number on the performance of the precoders has been analyzed. This impact has been exploited to propose an hybrid precoding scheme that reduces the complexity of the previously proposed precoders. In addition, in Large MIMO systems, an alternative precoder scheme is proposed. In the last part of the thesis, parallel implementations of the SUMIS algorithm are presented. Several strategies for the parallelization of the algorithm are proposed and evaluated on two different platforms: multicore central processing unit (CPU) and graphics processing unit (GPU). The parallel implementations achieve a significant speedup compared to the CPU version. Therefore, these implementations allow to simulate a scalable quasi optimal soft detector in a Large MIMO system much faster than by conventional simuLa presente tesis se enmarca dentro de los sistemas de comunicaciones de múltiples antenas o sistemas MIMO. Hoy en día, estos sistemas presentan una de las tecnologías más prometedoras dentro de los sistemas comunicaciones inalámbricas. A través del uso de múltiples antenas en ambos lados, transmisor y receptor, la tasa de transmisión y la calidad de la misma es aumentada. Por otro lado, la tecnología MIMO puede ser utilizada en un escenario multiusuario, donde una estación base (BS) la cual está equipada con varias antenas, sirve a varios usuarios al mismo tiempo, estos usuarios comparten dimensión espacial causando interferencias multiusuario. Por todas estas razones, la tecnología MIMO ha sido adoptada en muchos de los estándares de comunicaciones de nueva generación. Por otro lado, la tecnología MIMO Masivo, en la cual la estación base está equipada con un gran número de antenas (cientos o miles) que sirve a muchos usuarios en el mismo recurso de tiempo-frecuencia. Sin embargo, las ventajas proporcionadas por los sistemas MIMO implican un aumento en el coste computacional requerido. Por ello, el diseño de receptores de baja complejidad es una cuestión importante en estos sistemas. Para conseguir esta finalidad, las principales contribuciones de la tesis se basan en la implementación de algoritmos de detección soft y esquemas de precodificación eficientes. En primer lugar, el problema de la detección soft eficiente en un sistema receptor sin iteración es abordado. Una descripción detallada sobre los detectores soft más empleados es presentada. Por otro lado, han sido propuestos dos algoritmos de bajo coste. El primer algoritmo está basado en el algoritmo Box Optimization Hard Detector (BOHD) y proporciona una baja complejidad de implementación logrando un buen rendimiento. El segundo de los algoritmos propuestos intenta reducir el coste computacional del conocido algoritmo Subspace Marginalization with Interference Suppression (SUMIS). En segundo lugar, han sido investidados detectores de entrada y salida soft (SISO, soft-input soft-output) los cuales son ejecutados en estructuras de recepción iterativa. El empleo de un receptor iterativo mejora el rendimiento del sistema con respecto a no realizar realimentación, pudiendo lograr la capacidad óptima. Por el contrario, el coste computacional se vuelve prohibitivo. En este contexto, tres algoritmos han sido presentados. Dos de ellos logran un rendimiento óptimo, reduciendo la complejidad de los detectores SISO óptimos que normalmente son empleados. Por el contrario, el otro algoritmo logra un rendimiento casi óptimo a baja complejidad. En la tercera parte, se ha abordado el problema de la precodificación. Se ha llevado a cabo un análisis de algunas de las técnicas de precodificación más usadas. En este contexto, se ha evaluado el impacto que el número de condición de la matriz de canal tiene en el rendimiento de los precodificadores. Además, se ha aprovechado este impacto para proponer un precodificador hibrido. Por otro lado, en MIMO Masivo, se ha propuesto un esquema precodificador. En la última parte de la tesis, la implementación paralela del algoritmo SUMIS es presentada. Varias estrategias sobre la paralelización del algoritmo han sido propuestas y evaluadas en dos plataformas diferentes: Unidad Central de Procesamiento multicore (multicore CPU) y Unidad de Procesamiento Gráfico (GPU). Las implementaciones paralelas consiguen una mejora de speedup. Estas implementaciones permiten simular para MIMO Masivo y de forma más rápida que por simulación convencional, un algoLa present tesi s'emmarca dins dels sistemes de comunicacions de múltiples antenes o sistemes MIMO. Avui dia, aquestos sistemes presenten una de les tecnologies més prometedora dins dels sistemes de comunicacions inalàmbriques. A través de l'ús de múltiples antenes en tots dos costats, transmissor y receptor, es pot augmentar la taxa de transmissió i la qualitat de la mateixa. D'altra banda, la tecnologia MIMO es pot utilitzar en un escenari multiusuari, on una estació base (BS) la qual està equipada amb diverses antenes serveix a diversos usuaris al mateix temps, aquests usuaris comparteixen dimensió espacial causant interferències multiusuari. Per totes aquestes raons, la tecnologia MIMO ha sigut adoptada en molts dels estàndars de comunicacions de nova generació. D'altra banda, la tecnologia MIMO Massiu, en la qual l'estació base està equipada amb un gran nombre d'antenes (centenars o milers) que serveix a molts usuaris en el mateix recurs de temps-freqüència. No obstant això, els avantatges proporcionats pels sistemes MIMO impliquen un augment en el cost computacional requerit. Per això, el disseny de receptors de baixa complexitat és una qüestió important en aquests sistemes. Per tal d'aconseguir esta finalitat, les principals contribucions de la tesi es basen en la implementació d'algoritmes de detecció soft i esquemes de precodificació eficients. En primer lloc, és abordat el problema de la detecció soft eficient en un sistema receptor sense interacció. Una descripció detallada dels detectors soft més emprats és presentada. D'altra banda, han sigut proposats dos algorismes de baix cost. El primer algorisme està basat en l'algorisme Box Optimization Hard Decoder (BOHD) i proporciona una baixa complexitat d'implementació aconseguint un bon resultat. El segon dels algorismes proposats intenta reduir el cost computacional del conegut algoritme Subspace Marginalization with Interference Suppression (SUMIS). En segon lloc, detectors d'entrada i eixidia soft (SISO, soft-input soft-output) els cuals són executats en estructures de recepció iterativa han sigut investigats. L'ocupació d'un receptor iteratiu millora el rendiment del sistema pel que fa a no realitzar realimentació, podent aconseguir la capacitat òptima. Per contra, el cost computacional es torna prohibitiu. En aquest context, tres algorismes han sigut presentats. Dos d'ells aconsegueixen un rendiment òptim, reduint la complexitat dels detectors SISO òptims que normalment són emprats. Per contra, l'altre algorisme aconsegueix un rendiment quasi òptim a baixa complexitat. En la tercera part, s'ha abordat el problema de la precodificació. S'ha dut a terme una anàlisi d'algunes de les tècniques de precodificació més usades, prestant especial atenció al seu rendiment i a la seua complexitat. Dins d'aquest context, l'impacte que el nombre de condició de la matriu de canal té en el rendiment dels precodificadors ha sigut avaluat. A més, aquest impacte ha sigut aprofitat per a proposar un precodificador híbrid , amb la finalitat de reduir la complexitat d'algorismes prèviament proposats. D'altra banda, en MIMO Massiu, un esquema precodificador ha sigut proposat. En l'última part, la implementació paral·lela de l'algorisme SUMIS és presentada. Diverses estratègies sobre la paral·lelizació de l'algorisme han sigut proposades i avaluades en dues plataformes diferents: multicore CPU i GPU. Les implementacions paral·leles aconsegueixen una millora de speedup quan el nombre d'àntenes o l'ordre de la constel·lació incrementen. D'aquesta manera, aquestes implementacions permeten simular per a MIMO Massiu, i de forma més ràpida que la simulació convencional.Simarro Haro, MDLA. (2017). Effi cient algorithms for iterative detection and decoding in Multiple-Input and Multiple-Output Communication Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/86186TESI