41 research outputs found

    Morphological and physiological responses of brassica chinensis on different far-red (FR) light treatments using internet-of-things (IoT) technology

    Get PDF
    Advanced technology in agriculture has enabled the manipulation of the artificial light spectrum in plant development such as improving yield and plant growth. Light manipulation using light-emitting diodes or LEDs can inhibit, delay, or even promote flowering. Some studies have shown that far-red (FR) light can stop flowering, but studies have not fully explored the best method involving intensity and duration to induce plant growth. This paper presents results on LED light manipulation techniques, particularly FR light, on plant flowering control and plant elongation. The light manipulation technique on the combination of colors, photoperiods, and intensities proved that it can stop flowering, and stimulate and control the growth of plants during cultivation. The system was monitored using an Internet-of-Things (IoT) remote monitoring system, and it performed data mining. The results showed that plants that were grown under artificial sunlight (T5) and normal light (T1) treatments were superior compared to others. The FR light delayed flowering until 50 days of planting and accelerated the plant growth and increased the fresh weight by 126%. The experiment showed that a high variable intensity at 300 µmol m-1 s-1 showed a great performance and produced the largest leaf area of 1517.0 cm2 and the highest fresh weight of 492.92 g. This study provides new insights to the researchers and the farming community on artificial light systems in improving plant factory production efficiency and in determining the best plant cultivation approach to create a stronger indoor farming management plant

    Smart Internet of Things Modular Micro Grow Room Architecture

    Get PDF
    This article proposes the Internet of Things-based self-sustaining modular grow room architecture for optimising the seed germination and seedling development process. The architecture is scalable and flexible as it can be adapted to particular environments, scopes, requirements and plant types; it is modular as the host room can contain one or more smaller-scale grow rooms, each of them controlling their own micro-environment independently. One of the main goals of the research was to develop such a system that could be deployed efficiently, with minimal costs and energy footprint, which would enable its practical usage primarily in private self-sustainable households. The usage of widely available and inexpensive components, open source code, and free cloud services all enabled us to reach such a goal. Besides simple automation mostly described by existing solutions, the architecture proposed within this article offers remote control and data processing and visualisation, data trend tracking, smart optimisation, and actuator control, and event notifications

    Comprehensive Review of Aquaponic, Hydroponic, and Recirculating Aquaculture Systems

    Get PDF
    Hydroponics and aquaponics are emergent agricultural techniques that offer several environmental solutions. It is anticipated that the hydroponic systems will result in a more significant profit from selling vegetables and other plants. The use of new technologies, such as hydroponics and aquaponics, has been demonstrated to increase the number of plants that can be grown. The recirculatory aquaculture system makes it possible to multiply fish production while consuming fewer resources. Essential factors of this technology include higher yield, safety, and water management. In addition, the scope of potential future research in hydroponics and aquaponics has been discussed. Furthermore, the paper identifies and discusses the various applications of hydroponics and aquaponics in agriculture

    A Cost-effective Multispectral Sensor System for Leaf-Level Physiological Traits

    Get PDF
    With the concern of the global population to reach 9 billion by 2050, ensuring global food security is a prime challenge for the research community. One potential way to tackle this challenge is sustainable intensification; making plant phenotyping a high throughput may go a long way in this respect. Among several other plant phenotyping schemes, leaf-level plant phenotyping needs to be implemented on a large scale using existing technologies. Leaf-level chemical traits, especially macronutrients and water content are important indicators to determine crop’s health. Leaf nitrogen (N) level, is one of the critical macronutrients that carries a lot of worthwhile nutrient information for classifying the plant’s health. Hence, the non-invasive leaf’s N measurement is an innovative technique for monitoring the plant’s health. Several techniques have tried to establish a correlation between the leaf’s chlorophyll content and the N level. However, a recent study showed that the correlation between chlorophyll content and leaf’s N level is profoundly affected by environmental factors. Moreover, it is also mentioned that when the N fertilization is high, chlorophyll becomes saturated. As a result, determining the high levels of N in plants becomes difficult. Moreover, plants need an optimum level of phosphorus (P) for their healthy growth. However, the existing leaf-level P status monitoring methods are expensive, limiting their deployment for the farmers of low resourceful countries. The aim of this thesis is to develop a low-cost, portable, lightweight, multifunctional, and quick-read multispectral sensor system to sense N, P, and water in leaves non-invasively. The proposed system has been developed based on two reflectance-based multispectral sensors (visible and near-infrared (NIR)). In addition, the proposed device can capture the reflectance data at 12 different wavelengths (six for each sensor). By deploying state of the art machine learning algorithms, the spectroscopic information is modeled and validated to predict that nutrient status. A total of five experiments were conducted including four on the greenhouse-controlled environment and one in the field. Within these five, three experiments were dedicated for N sensing, one for water estimation, and one for P status determination. In the first experiment, spectral data were collected from 87 leaves of canola plants, subjected to varying levels of N fertilization. The second experiment was performed on 1008 leaves from 42 canola cultivars, which were subjected to low and high N levels, used in the field experiment. The K-Nearest Neighbors (KNN) algorithm was employed to model the reflectance data. The trained model shows an average accuracy of 88.4% on the test set for the first experiment and 79.2% for the second experiment. In the third and fourth experiments, spectral data were collected from 121 leaves for N and 186 for water experiments respectively; and Rational Quadratic Gaussian Process Regression (GPR) algorithm is applied to correlate the reflectance data with actual N and water content. By performing 5-fold cross-validation, the N estimation shows a coefficient of determination (R^2) of 63.91% for canola, 80.05% for corn, 82.29% for soybean, and 63.21% for wheat. For water content estimation, canola shows an R^2 of 18.02%, corn of 68.41%, soybean of 46.38%, and wheat of 64.58%. Finally, the fifth experiment was conducted on 267 leaf samples subjected to four levels of P treatments, and KNN exhibits the best accuracy, on the test set, of about 71.2%, 73.5%, and 67.7% for corn, soybean, and wheat, respectively. Overall, the result concludes that the proposed cost-effective sensing system can be viable in determining leaf N and P status/content. However, further investigation is needed to improve the water estimation results using the proposed device. Moreover, the utility of the device to estimate other nutrients as well as other crops has great potential for future research

    Emergent quality issues in the supply of Chinese medicinal plants: A mixed methods investigation of their contemporary occurrence and historical persistence

    Get PDF
    Quality issues that emerged centuries ago in Chinese medicinal plants (CMP) were investigated to explore why they still persist in an era of advanced analytical testing and extensive legislation so that a solution to improve CMP quality could be proposed. This is important for 85% of the world’s population who rely on medicinal plants (MP) for primary healthcare considering the adverse events, including fatalities that arise from such quality issues. CMP are the most prevalent medicinal plants globally. This investigation used mixed-methods, including 15 interviews with CMP expert key informants (KI), together with thematic analysis that identified the main CMP quality issues, why they persisted, and informed solutions. An unexplained case example, Eleutherococcus nodiflorus (EN), was analysed by collection of 106 samples of EN, its known toxic adulterant Periploca sepium (PS), and a related substitute, Eleutherococcus senticosus (ES), across mainland China, Taiwan and the UK. Authenticity of the samples was determined using High-performance thinlayer chromatography. Misidentification, adulteration, substitution and toxicity were the main CMP quality issues identified. Adulteration was found widespread globally with 57.4% EN found authentic, and 24.6% adulterated with cardiotoxic PS, mostly at markets and traditional pharmacies. The EN study further highlighted that the reason CMP quality issues persisted was due to the laboratory-bound nature of analytical methods and testing currently used that leave gaps in detection throughout much of the supply chain. CMP quality could be more effectively tested with patented analytical technology (PAT) and simpler field-based testing including indicator strip tests. Education highlighting the long-term economic value and communal benefit of delivering better quality CMP to consumers was recommended in favour of the financial motivation for actions that lead to the persistence of well-known and recurrent CMP quality issues

    XVI Agricultural Science Congress 2023: Transformation of Agri-Food Systems for Achieving Sustainable Development Goals

    Get PDF
    The XVI Agricultural Science Congress being jointly organized by the National Academy of Agricultural Sciences (NAAS) and the Indian Council of Agricultural Research (ICAR) during 10-13 October 2023, at hotel Le Meridien, Kochi, is a mega event echoing the theme “Transformation of Agri-Food Systems for achieving Sustainable Development Goals”. ICAR-Central Marine Fisheries Research Institute takes great pride in hosting the XVI ASC, which will be the perfect point of convergence of academicians, researchers, students, farmers, fishers, traders, entrepreneurs, and other stakeholders involved in agri-production systems that ensure food and nutritional security for a burgeoning population. With impeding challenges like growing urbanization, increasing unemployment, growing population, increasing food demands, degradation of natural resources through human interference, climate change impacts and natural calamities, the challenges ahead for India to achieve the Sustainable Development Goals (SDGs) set out by the United Nations are many. The XVI ASC will provide an interface for dissemination of useful information across all sectors of stakeholders invested in developing India’s agri-food systems, not only to meet the SDGs, but also to ensure a stable structure on par with agri-food systems around the world. It is an honour to present this Book of Abstracts which is a compilation of a total of 668 abstracts that convey the results of R&D programs being done in India. The abstracts have been categorized under 10 major Themes – 1. Ensuring Food & Nutritional Security: Production, Consumption and Value addition; 2. Climate Action for Sustainable Agri-Food Systems; 3. Frontier Science and emerging Genetic Technologies: Genome, Breeding, Gene Editing; 4. Livestock-based Transformation of Food Systems; 5. Horticulture-based Transformation of Food Systems; 6. Aquaculture & Fisheries-based Transformation of Food Systems; 7. Nature-based Solutions for Sustainable AgriFood Systems; 8. Next Generation Technologies: Digital Agriculture, Precision Farming and AI-based Systems; 9. Policies and Institutions for Transforming Agri-Food Systems; 10. International Partnership for Research, Education and Development. This Book of Abstracts sets the stage for the mega event itself, which will see a flow of knowledge emanating from a zeal to transform and push India’s Agri-Food Systems to perform par excellence and achieve not only the SDGs of the UN but also to rise as a world leader in the sector. I thank and congratulate all the participants who have submitted abstracts for this mega event, and I also applaud the team that has strived hard to publish this Book of Abstracts ahead of the event. I wish all the delegates and participants a very vibrant and memorable time at the XVI ASC

    Pertanika Journal of Science & Technology

    Get PDF
    corecore