Supporting Read/Write Applications in Embedded Real-time Systems via Suspension-aware Analysis

In many embedded real-time systems, applications often interact with I/O devices via read/write operations, which may incur considerable suspension delays. Unfortunately, prior analysis methods for validating timing correctness in embedded systems become quite pessimistic when suspension delays are present. In this paper, we consider the problem of supporting two common types of I/O applications in a multiprocessor system, that is, write-only applications and read-write applications. For the write-only application model, we present a much improved analysis technique that results in only O(m) suspension-related utilization loss, where m is the number of processors. For the second application model, we present a flexible I/O placement strategy and a corresponding new scheduling algorithm, which can completely circumvent the negative impact due to read- and write-induced suspension delays. We illustrate the feasibility of the proposed I/O-placement-based schedule via a case study implementation. Furthermore, experiments presented herein show that the improvement with respect to system utilization over prior methods is often significant

Restart-Based Fault-Tolerance: System Design and Schedulability Analysis

Embedded systems in safety-critical environments are continuously required to deliver more performance and functionality, while expected to provide verified safety guarantees. Nonetheless, platform-wide software verification (required for safety) is often expensive. Therefore, design methods that enable utilization of components such as real-time operating systems (RTOS), without requiring their correctness to guarantee safety, is necessary. In this paper, we propose a design approach to deploy safe-by-design embedded systems. To attain this goal, we rely on a small core of verified software to handle faults in applications and RTOS and recover from them while ensuring that timing constraints of safety-critical tasks are always satisfied. Faults are detected by monitoring the application timing and fault-recovery is achieved via full platform restart and software reload, enabled by the short restart time of embedded systems. Schedulability analysis is used to ensure that the timing constraints of critical plant control tasks are always satisfied in spite of faults and consequent restarts. We derive schedulability results for four restart-tolerant task models. We use a simulator to evaluate and compare the performance of the considered scheduling models

Verifying Weakly-Hard Real-Time Properties of Traffic Streams in Switched Networks

In this paper, we introduce the first verification method which is able to provide weakly-hard real-time guarantees for tasks and task chains in systems with multiple resources under partitioned scheduling with fixed priorities. Existing weakly-hard real-time verification techniques are restricted today to systems with a single resource. A weakly-hard real-time guarantee specifies an upper bound on the maximum number m of deadline misses of a task in a sequence of k consecutive executions. Such a guarantee is useful if a task can experience a bounded number of deadline misses without impacting the system mission. We present our verification method in the context of switched networks with traffic streams between nodes, and demonstrate its practical applicability in an automotive case study

Leveraging Weakly-hard Constraints for Improving System Fault Tolerance with Functional and Timing Guarantees

Many safety-critical real-time systems operate under harsh environment and are subject to soft errors caused by transient or intermittent faults. It is critical and yet often very challenging to apply fault tolerance techniques in these systems, due to their resource limitations and stringent constraints on timing and functionality. In this work, we leverage the concept of weakly-hard constraints, which allows task deadline misses in a bounded manner, to improve system's capability to accommodate fault tolerance techniques while ensuring timing and functional correctness. In particular, we 1) quantitatively measure control cost under different deadline hit/miss scenarios and identify weak-hard constraints that guarantee control stability, 2) employ typical worst-case analysis (TWCA) to bound the number of deadline misses and approximate system control cost, 3) develop an event-based simulation method to check the task execution pattern and evaluate system control cost for any given solution and 4) develop a meta-heuristic algorithm that consists of heuristic methods and a simulated annealing procedure to explore the design space. Our experiments on an industrial case study and a set of synthetic examples demonstrate the effectiveness of our approach.Comment: ICCAD 202

Utilization-Based Scheduling of Flexible Mixed-Criticality Real-Time Tasks

Mixed-criticality models are an emerging paradigm for the design of real-time systems because of their significantly improved resource efficiency. However, formal mixed-criticality models have traditionally been characterized by two impractical assumptions: once \textit{any} high-criticality task overruns, \textit{all} low-criticality tasks are suspended and \textit{all other} high-criticality tasks are assumed to exhibit high-criticality behaviors at the same time. In this paper, we propose a more realistic mixed-criticality model, called the flexible mixed-criticality (FMC) model, in which these two issues are addressed in a combined manner. In this new model, only the overrun task itself is assumed to exhibit high-criticality behavior, while other high-criticality tasks remain in the same mode as before. The guaranteed service levels of low-criticality tasks are gracefully degraded with the overruns of high-criticality tasks. We derive a utilization-based technique to analyze the schedulability of this new mixed-criticality model under EDF-VD scheduling. During runtime, the proposed test condition serves an important criterion for dynamic service level tuning, by means of which the maximum available execution budget for low-criticality tasks can be directly determined with minimal overhead while guaranteeing mixed-criticality schedulability. Experiments demonstrate the effectiveness of the FMC scheme compared with state-of-the-art techniques.Comment: This paper has been submitted to IEEE Transaction on Computers (TC) on Sept-09th-201

A Survey of Techniques For Improving Energy Efficiency in Embedded Computing Systems

Recent technological advances have greatly improved the performance and features of embedded systems. With the number of just mobile devices now reaching nearly equal to the population of earth, embedded systems have truly become ubiquitous. These trends, however, have also made the task of managing their power consumption extremely challenging. In recent years, several techniques have been proposed to address this issue. In this paper, we survey the techniques for managing power consumption of embedded systems. We discuss the need of power management and provide a classification of the techniques on several important parameters to highlight their similarities and differences. This paper is intended to help the researchers and application-developers in gaining insights into the working of power management techniques and designing even more efficient high-performance embedded systems of tomorrow

Bounds on Worst-Case Deadline Failure Probabilities in Controller Area Networks

Industrial communication networks like the Controller Area Network (CAN) are often required to operate reliably in harsh environments which expose the communication network to random errors. Probabilistic schedulability analysis can employ rich stochastic error models to capture random error behaviors, but this is most often at the expense of increased analysis complexity. In this paper, an efficient method (of time complexity O(n log n)) to bound the message deadline failure probabilities for an industrial CAN network consisting of n periodic/sporadic message transmissions is proposed. The paper develops bounds for Deadline Minus Jitter Monotonic (DMJM) and Earliest Deadline First (EDF) message scheduling techniques. Both random errors and random bursts of errors can be included in the model. Stochastic simulations and a case study considering DMJM and EDF scheduling of an automotive benchmark message set provide validation of the technique and highlight its application

Budgeting Under-Specified Tasks for Weakly-Hard Real-Time Systems

In this paper, we present an extension of slack analysis for budgeting in the design of weakly-hard real-time systems. During design, it often happens that some parts of a task set are fully specified while other parameters, e.g. regarding recovery or monitoring tasks, will be available only much later. In such cases, slack analysis can help anticipate how these missing parameters can influence the behavior of the whole system so that a resource budget can be allocated to them. It is, however, sufficient in many application contexts to budget these tasks in order to preserve weakly-hard rather than hard guarantees. We thus present an extension of slack analysis for deriving task budgets for systems with hard and weakly-hard requirements. This work is motivated by and validated on a realistic case study inspired by industrial practice