Wideband digital phase comparator for high current shunts

A wideband phase comparator for precise measurements of phase difference of high current shunts has been developed at INRIM. The two-input digital phase detector is realized with a precision wideband digitizer connected through a pair of symmetric active guarded transformers to the outputs of the shunts under comparison. Data are first acquired asynchronously, and then transferred from on-board memory to host memory. Because of the large amount of data collected the filtering process and the analysis algorithms are performed outside the acquisition routine. Most of the systematic errors can be compensated by a proper inversion procedure. The system is suitable for comparing shunts in a wide range of currents, from several hundred of milliampere up to 100 A, and frequencies ranging between 500 Hz and 100 kHz. Expanded uncertainty (k=2) less than 0.05 mrad, for frequency up to 100 kHz, is obtained in the measurement of the phase difference of a group of 10 A shunts, provided by some European NMIs, using a digitizer with sampling frequency up to 1 MHz. An enhanced version of the phase comparator employs a new digital phase detector with higher sampling frequency and vertical resolution. This permits to decrease the contribution to the uncertainty budget of the phase detector of a factor two from 20 kHz to 100 kHz. Theories and experiments show that the phase difference between two high precision wideband digitizers, coupled as phase detector, depends on multiple factors derived from both analog and digital imprint of each sampling system.Comment: 20 pages, 9 figure

Thermionic research program, volume I Final report

Design, fabrication, calibration, instrumentation, and operation of test converter to generate parameters in thermionic converter operatio

A high resolution capacitance-based lateral position microsensor

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1997.Includes bibliographical references (leaves 161-164).by Douglas Edward Adams.M.S

New Insight into Cerebrovascular Diseases

“Brain circulation is a true road map that consists of large extended navigation territories and a number of unimagined and undiscovered routes.” Dr. Patricia Bozzetto Ambrosi This book combines an update on the review of cerebrovascular diseases in the form of textbook chapters, which has been carefully reviewed by Dr. Patricia Bozzetto Ambrosi, Drs. Rufai Ahmad and Auwal Abdullahi and Dr. Amit Agrawal, high-performance academic editors with extensive experience in neurodisciplines, including neurology, neurosurgery, neuroscience, and neuroradiology, covering the best standards of neurological practice involving basic and clinical aspects of cerebrovascular diseases. Each topic was carefully revised and prepared using smooth, structured vocabulary, plus superb graphics and scientific illustrations. In emphasizing the most common aspects of cerebrovascular diseases: stroke burden, pathophysiology, hemodynamics, diagnosis, management, repair, and healing, the book is comprehensive but concise and should become the standard reference guide for this neurological approach

Near-term hybrid vehicle program, phase 1. Appendix B: Design trade-off studies report. Volume 2: Supplement to design trade-off studies

Results of studies leading to the preliminary design of a hybrid passenger vehicle which is projected to have the maximum potential for reducing petroleum consumption in the near term are presented. Heat engine/electric hybrid vehicle tradeoffs, assessment of battery power source, and weight and cost analysis of key components are among the topics covered. Performance of auxiliary equipment, such as power steering, power brakes, air conditioning, lighting and electrical accessories, heating and ventilation is discussed along with the selection of preferred passenger compartment heating procedure for the hybrid vehicle. Waste heat from the engine, thermal energy storage, and an auxiliary burner are among the approaches considered

Advances in Solid State Circuit Technologies

This book brings together contributions from experts in the fields to describe the current status of important topics in solid-state circuit technologies. It consists of 20 chapters which are grouped under the following categories: general information, circuits and devices, materials, and characterization techniques. These chapters have been written by renowned experts in the respective fields making this book valuable to the integrated circuits and materials science communities. It is intended for a diverse readership including electrical engineers and material scientists in the industry and academic institutions. Readers will be able to familiarize themselves with the latest technologies in the various fields