2,214 research outputs found
Recommended from our members
Directed Placement for mVLSI Devices
Continuous-flow microfluidic devices based on integrated channel networks are becoming increasingly prevalent in research in the biological sciences. At present, these devices are physically laid out by hand by domain experts who understand both the underlying technology and the biological functions that will execute on fabricated devices. The lack of a design science that is specific to microfluidic technology creates a substantial barrier to entry. To address this concern, this article introduces Directed Placement, a physical design algorithm that leverages the natural "directedness" in most modern microfluidic designs: fluid enters at designated inputs, flows through a linear or tree-based network of channels and fluidic components, and exits the device at dedicated outputs. Directed placement creates physical layouts that share many principle similarities to those created by domain experts. Directed placement allows components to be placed closer to their neighbors compared to existing layout algorithms based on planar graph embedding or simulated annealing, leading to an average reduction in laid-out fluid channel length of 91% while improving area utilization by 8% on average. Directed placement is compatible with both passive and active microfluidic devices and is compatible with a variety of mainstream manufacturing technologies
Limits on Fundamental Limits to Computation
An indispensable part of our lives, computing has also become essential to
industries and governments. Steady improvements in computer hardware have been
supported by periodic doubling of transistor densities in integrated circuits
over the last fifty years. Such Moore scaling now requires increasingly heroic
efforts, stimulating research in alternative hardware and stirring controversy.
To help evaluate emerging technologies and enrich our understanding of
integrated-circuit scaling, we review fundamental limits to computation: in
manufacturing, energy, physical space, design and verification effort, and
algorithms. To outline what is achievable in principle and in practice, we
recall how some limits were circumvented, compare loose and tight limits. We
also point out that engineering difficulties encountered by emerging
technologies may indicate yet-unknown limits.Comment: 15 pages, 4 figures, 1 tabl
HIGH PERFORMANCE CLOCK DISTRIBUTION FOR HIGH-SPEED VLSI SYSTEMS
Tohoku University堀口 進課
Early analysis of VLSI systems with packaging considerations
There is an explosive growth in the size of the VLSI (Very Large Scale Integration) systems today. Microelectronic system designers are packing millions of transistors in a single IC chip. Packaging techniques like Multi-chip module (MCM) and flip-chip bonding offer faster interconnects and IC\u27s capable of accommodating a larger number of inputs and outputs. The complexity of today\u27s designs and the availability of advanced packaging techniques call for an early analysis of the system based on estimation of system parameters to select from a wide choice of circuit partitioning, architecture alternatives and packaging options which give the best cost/performance.
A procedure for the early analysis of VLSI systems under packaging considerations has been developed and implemented in this dissertation work. The early analysis tool was used to evaluate the inter-relationship between partitioning and packaging and to determine the best system design considering cost, size and delays. The functional unit level description of a 750,000-transistor MicroSparc processor was studied using an exhaustive search technique. The early analysis performed on the MicroSparc design suggested that the three chip multi-chip design using flip-chip IC\u27s interconnected on a MCM-D substrate is the most cost effective. An early bond pitch analysis performed using the tool concluded that a 250-micron bond pitch is the best choice for the multi-chip MicroSparc designs. The tool was also used to perform an early cache analysis which showed that the use of separate memory and logic processes made it feasible to design the MicroSparc design with larger cache sizes than the use of a combined logic and memory process. The designs based on the separate processes gave equivalent or better performance than the design candidates with smaller cache sizes. Future extensions of the procedure are also outlined here
Recommended from our members
Automatic synthesis of analog layout : a survey
A review of recent research in the automatic synthesis of physical geometry for analog integrated circuits is presented. On introduction, an explanation of the difficulties involved in analog layout as opposed to digital layout is covered. Review of the literature then follows. Emphasis is placed on the exposition of general methods for addressing problems specific to analog layout, with the details of specific systems only being given when they surve to illustrate these methods well. The conclusion discusses problems remaining and offers a prediction as to how technology will evolve to solve them. It is argued that although progress has been and will continue to be made in the automation of analog IC layout, due to fundamental differences in the nature of analog IC design as opposed to digital design, it should not be expected that the level of automation of the former will reach that of the latter any time soon
Custom Integrated Circuits
Contains reprots on two research projects.U.S. Air Force (Contract F49620-81-C-0054)U.S. Air Force (Contract F49620-80-C-0073
A Comprehensive Workflow for General-Purpose Neural Modeling with Highly Configurable Neuromorphic Hardware Systems
In this paper we present a methodological framework that meets novel
requirements emerging from upcoming types of accelerated and highly
configurable neuromorphic hardware systems. We describe in detail a device with
45 million programmable and dynamic synapses that is currently under
development, and we sketch the conceptual challenges that arise from taking
this platform into operation. More specifically, we aim at the establishment of
this neuromorphic system as a flexible and neuroscientifically valuable
modeling tool that can be used by non-hardware-experts. We consider various
functional aspects to be crucial for this purpose, and we introduce a
consistent workflow with detailed descriptions of all involved modules that
implement the suggested steps: The integration of the hardware interface into
the simulator-independent model description language PyNN; a fully automated
translation between the PyNN domain and appropriate hardware configurations; an
executable specification of the future neuromorphic system that can be
seamlessly integrated into this biology-to-hardware mapping process as a test
bench for all software layers and possible hardware design modifications; an
evaluation scheme that deploys models from a dedicated benchmark library,
compares the results generated by virtual or prototype hardware devices with
reference software simulations and analyzes the differences. The integration of
these components into one hardware-software workflow provides an ecosystem for
ongoing preparative studies that support the hardware design process and
represents the basis for the maturity of the model-to-hardware mapping
software. The functionality and flexibility of the latter is proven with a
variety of experimental results
- …