Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

Design and Comparison of Asynchronous FFT Implementations

Fast Fourier Transform (FFT) is a widely used digital signal processing technology in a large variety of applications. For battery-powered embedded systems incorporating FFT, its physical implementation is constrained by strict power consumption, especially during idle periods. Compared to the prevailing clocked synchronous counterpart, quasi-delay insensitive asynchronous circuits offer a series of advantages including flexible timing requirement and lower leakage power, making them ideal choices for these systems. In this thesis work, various FFT configurations were implemented in the low-power Multi-Threshold NULL Convention Logic (MTNCL) paradigm. Analysis illustrates the area and power consumption trends along the changing of the number of points, data widths, and the number of pipeline stages

Design and Comparison of Asynchronous FFT Implementations

Fast Fourier Transform (FFT) is a widely used digital signal processing technology in a large variety of applications. For battery-powered embedded systems incorporating FFT, its physical implementation is constrained by strict power consumption, especially during idle periods. Compared to the prevailing clocked synchronous counterpart, quasi-delay insensitive asynchronous circuits offer a series of advantages including flexible timing requirement and lower leakage power, making them ideal choices for these systems. In this thesis work, various FFT configurations were implemented in the low-power Multi-Threshold NULL Convention Logic (MTNCL) paradigm. Analysis illustrates the area and power consumption trends along the changing of the number of points, data widths, and the number of pipeline stages

Asynchronous 3D (Async3D): Design Methodology and Analysis of 3D Asynchronous Circuits

This dissertation focuses on the application of 3D integrated circuit (IC) technology on asynchronous logic paradigms, mainly NULL Convention Logic (NCL) and Multi-Threshold NCL (MTNCL). It presents the Async3D tool flow and library for NCL and MTNCL 3D ICs. It also analyzes NCL and MTNCL circuits in 3D IC. Several FIR filter designs were implement in NCL, MTNCL, and synchronous architecture to compare synchronous and asynchronous circuits in 2D and 3D ICs. The designs were normalized based on performance and several metrics were measured for comparison. Area, interconnect length, power consumption, and power density were compared among NCL, MTNCL, and synchronous designs. The NCL and MTNCL designs showed improvements in all metrics when moving from 2D to 3D. The 3D NCL and MTNCL designs also showed a balanced power distribution in post-layout analysis. This could alleviate the hotspot problem prevalently found in most 3D ICs. NCL and MTNCL have the potential to synergize well with 3D IC technology

Non-Volatile Memory Adaptation in Asynchronous Microcontroller for Low Leakage Power and Fast Turn-on Time

This dissertation presents an MSP430 microcontroller implementation using Multi-Threshold NULL Convention Logic (MTNCL) methodology combined with an asynchronous non-volatile magnetic random-access-memory (RAM) to achieve low leakage power and fast turn-on. This asynchronous non-volatile RAM is designed with a Spin-Transfer Torque (STT) memory device model and CMOS transistors in a 65 nm technology. A self-timed Quasi-Delay-Insensitive 1 KB STT RAM is designed with an MTNCL interface and handshaking protocol. A replica methodology is implemented to handle write operation completion detection for long state-switching delays of the STT memory device. The MTNCL MSP430 core is integrated with the STT RAM to create a fully asynchronous non-volatile microcontroller. The MSP430 architecture, the MTNCL design methodology, and the STT RAM’s low power property, along with STT RAM’s non-volatility yield multiple advantages in the MTNCL-STT RAM system for a variety of applications. For comparison, a baseline system with the same MTNCL core combined with an asynchronous CMOS RAM is designed and tested. Schematic simulation results demonstrate that the MTNCL-CMOS RAM system presents advantages in execution time and active energy over the MTNCL-STT RAM system; however, the MTNCL-STT RAM system presents unmatched advantages such as negligible leakage power, zero overhead memory power failure handling, and fast system turn-on

Desynchronization: Synthesis of asynchronous circuits from synchronous specifications

Asynchronous implementation techniques, which measure logic delays at run time and activate registers accordingly, are inherently more robust than their synchronous counterparts, which estimate worst-case delays at design time, and constrain the clock cycle accordingly. De-synchronization is a new paradigm to automate the design of asynchronous circuits from synchronous specifications, thus permitting widespread adoption of asynchronicity, without requiring special design skills or tools. In this paper, we first of all study different protocols for de-synchronization and formally prove their correctness, using techniques originally developed for distributed deployment of synchronous language specifications. We also provide a taxonomy of existing protocols for asynchronous latch controllers, covering in particular the four-phase handshake protocols devised in the literature for micro-pipelines. We then propose a new controller which exhibits provably maximal concurrency, and analyze the performance of desynchronized circuits with respect to the original synchronous optimized implementation. We finally prove the feasibility and effectiveness of our approach, by showing its application to a set of real designs, including a complete implementation of the DLX microprocessor architectur

A 100-MIPS GaAs asynchronous microprocessor

The authors describe how they ported an asynchronous microprocessor previously implemented in CMOS to gallium arsenide, using a technology-independent asynchronous design technique. They introduce new circuits including a sense-amplifier, a completion detection circuit, and a general circuit structure for operators specified by production rules. The authors used and tested these circuits in a variety of designs

Towards Logic Functions as the Device using Spin Wave Functions Nanofabric

As CMOS technology scaling is fast approaching its fundamental limits, several new nano-electronic devices have been proposed as possible alternatives to MOSFETs. Research on emerging devices mainly focusses on improving the intrinsic characteristics of these single devices keeping the overall integration approach fairly conventional. However, due to high logic complexity and wiring requirements, the overall system-level power, performance and area do not scale proportional to that of individual devices. Thereby, we propose a fundamental shift in mindset, to make the devices themselves more functional than simple switches. Our goal in this thesis is to develop a new nanoscale fabric paradigm that enables realization of arbitrary logic functions (with high fan-in/fan-out) more efficiently. We leverage on non-equilibrium spin wave physical phenomenon and wave interference to realize these elementary functions called Spin Wave Functions (SPWFs). In the proposed fabric, computation is based on the principle of wave superposition. Information is encoded both in the phase and amplitude of spin waves; thereby providing an opportunity for compressed data representation. Moreover, spin wave propagation does not involve any physical movement of charge particles. This provides a fundamental advantage over conventional charge based electronics and opens new horizons for novel nano-scale architectures. We show several variants of the SPWFs based on topology, signal weights, control inputs and wave frequencies. SPWF based designs of arithmetic circuits like adders and parallel counters are presented. Our efforts towards developing new architectures using SPWFs places strong emphasis on integrated fabric-circuit exploration methodology. With different topologies and circuit styles we have explored how capabilities at individual fabric components level can affect design and vice versa. Our estimates on benefits vs. 45nm CMOS implementation show that, for a 1-bit adder, up to 40x reduction in area and 228x reduction in power is possible. For the 2-bit adder, results show that up to 33x area reduction and 222x reduction in power may be possible. Building large scale SPWF-based systems, requires mechanisms for synchronization and data streaming. In this thesis, we present data streaming approaches based on Asynchronous SPWFs (A-SPWFs). As an example, a 32-bit Carry Completion Sensing Adder (CCSA) is shown based on the A-SPWF approach with preliminary power, performance and area evaluations

Evaluation and Analysis of NULL Convention Logic Circuits

Integrated circuit (IC) designers face many challenges in utilizing state-of-the-art technology nodes, such as the increased effects of process variation on timing analysis and heterogeneous multi-die architectures that span across multiple technologies while simultaneously increasing performance and decreasing power consumption. These challenges provide opportunity for utilization of asynchronous design paradigms due to their inherent flexibility and robustness. While NULL Convention Logic (NCL) has been implemented in a variety of applications, current literature does not fully encompass the intricacies of NCL power performance across a variety of applications, technology nodes, circuit scale, and voltage scaling, thereby preventing further adoption and utilization of this design paradigm. This dissertation evaluates the nominal dynamic energy, voltage-scaled dynamic energy, and static power consumption of NCL across variations in circuit type, circuit scale, and technology node, including 130 nm, 90 nm, and 45 nm processes. These results are compared with synchronous counterparts and analyzed for a range of trends in order to identify and quantify advantages and disadvantages of NCL across a variety of applications. By providing an evaluation of a broad range of circuits and characteristics, an IC designer may effectively predict the advantages or disadvantages of an NCL implementation for their application