508 research outputs found

    Detecting Vital Signs with Wearable Wireless Sensors

    Get PDF
    The emergence of wireless technologies and advancements in on-body sensor design can enable change in the conventional health-care system, replacing it with wearable health-care systems, centred on the individual. Wearable monitoring systems can provide continuous physiological data, as well as better information regarding the general health of individuals. Thus, such vital-sign monitoring systems will reduce health-care costs by disease prevention and enhance the quality of life with disease management. In this paper, recent progress in non-invasive monitoring technologies for chronic disease management is reviewed. In particular, devices and techniques for monitoring blood pressure, blood glucose levels, cardiac activity and respiratory activity are discussed; in addition, on-body propagation issues for multiple sensors are presented

    Cardiovascular instrumentation for spaceflight

    Get PDF
    The observation mechanisms dealing with pressure, flow, morphology, temperature, etc. are discussed. The approach taken in the performance of this study was to (1) review ground and space-flight data on cardiovascular function, including earlier related ground-based and space-flight animal studies, Mercury, Gemini, Apollo, Skylab, and recent bed-rest studies, (2) review cardiovascular measurement parameters required to assess individual performance and physiological alternations during space flight, (3) perform an instrumentation survey including a literature search as well as personal contact with the applicable investigators, (4) assess instrumentation applicability with respect to the established criteria, and (5) recommend future research and development activity. It is concluded that, for the most part, the required instrumentation technology is available but that mission-peculiar criteria will require modifications to adapt the applicable instrumentation to a space-flight configuration

    Wearable technology and the cardiovascular system: the future of patient assessment

    Get PDF
    The past decade has seen a dramatic rise in consumer technologies able to monitor a variety of cardiovascular parameters. Such devices initially recorded markers of exercise, but now include physiological and health-care focused measurements. The public are keen to adopt these devices in the belief that they are useful to identify and monitor cardiovascular disease. Clinicians are therefore often presented with health app data accompanied by a diverse range of concerns and queries. Herein, we assess whether these devices are accurate, their outputs validated, and whether they are suitable for professionals to make management decisions. We review underpinning methods and technologies and explore the evidence supporting the use of these devices as diagnostic and monitoring tools in hypertension, arrhythmia, heart failure, coronary artery disease, pulmonary hypertension, and valvular heart disease. Used correctly, they might improve health care and support research

    Biomedical applications of NASA science and technology Quarterly progress report, 15 Dec. 1968 - 14 Mar. 1969

    Get PDF
    NASA developed technology stored in data bank transferred to bioinstrumentation problems generated at university medical school

    Cardiologie nucléaire du 21ième siècle : nouveautés et réalités

    Full text link
    Les maladies cardio-vasculaires demeurent une cause majeure de mortalité et morbidité dans les sociétés développées. La recherche de déterminants prédictifs d’évènements vasculaires représente toujours un enjeu d’actualité face aux coûts croissants des dépenses reliées aux soins médicaux et à l’élargissement des populations concernées, notamment face à l’occidentalisation des pays émergeants comme l’Inde, le Brésil et la Chine. La cardiologie nucléaire occupe depuis trente ans, une place essentielle dans l’arsenal des méthodes diagnostiques et pronostiques des cardiopathies. De plus, de nouvelles percées permettront de dépister d’une façon plus précoce et précise, la maladie athérosclérotique cardiaque et périphérique chez les populations atteintes ainsi qu’en prévention primaire. Nous présenterons dans cette thèse, deux approches nouvelles de la cardiologie nucléaire. La dysfonction endothéliale est considérée comme le signal pathologique le plus précoce de l’athérosclérose. Les facteurs de risques cardiovasculaires traditionnels atteignent la fonction endothéliale et peuvent initier le processus d’athérosclérose même en l’absence de lésion endothéliale physique. La quantification de la fonction endothéliale coronarienne comporte donc un intérêt certain comme biomarqueur précoce de la maladie coronarienne. La pléthysmographie isotopique, méthodologie développée lors de ce cycle d’étude, permet de quantifier la fonction endothéliale périphérique, cette dernière étant corrélée à la fonction endothéliale coronarienne. Cette méthodologie est démontrée dans le premier manuscrit (Harel et. al., Physiol Meas., 2007). L’utilisation d’un radiomarquage des érythrocytes permet la mesure du flot artériel au niveau du membre supérieur pendant la réalisation d’une hyperémie réactive locale. Cette nouvelle procédure a été validée en comparaison à la pléthysmographie par jauge de contrainte sur une cohorte de 26 patients. Elle a démontré une excellente reproductibilité (coefficient de corrélation intra-classe = 0.89). De plus, la mesure du flot artérielle pendant la réaction hyperémique corrélait avec les mesure réalisées par la méthode de référence (r=0.87). Le deuxième manuscrit expose les bases de la spectroscopie infrarouge comme méthodologie de mesure du flot artériel et quantification de la réaction hyperémique (Harel et. al., Physiol Meas., 2008). Cette étude utilisa un protocole de triples mesures simultanées à l’aide de la pléthysmographie par jauge de contrainte, radio-isotopique et par spectroscopie infrarouge. La technique par spectroscopie fut démontrée précise et reproductible quant à la mesure des flots artériels au niveau de l’avant-bras. Cette nouvelle procédure a présenté des avantages indéniables quant à la diminution d’artéfact et à sa facilité d’utilisation. Le second volet de ma thèse porte sur l’analyse du synchronisme de contraction cardiaque. En effet, plus de 30% des patients recevant une thérapie de resynchronisation ne démontre pas d’amélioration clinique. De plus, ce taux de non-réponse est encore plus élevé lors de l’utilisation de critères morphologiques de réponse à la resynchronisation (réduction du volume télésystolique). Il existe donc un besoin urgent de développer une méthodologie de mesure fiable et précise de la dynamique cardiaque. Le troisième manuscrit expose les bases d’une nouvelle technique radio-isotopique permettant la quantification de la fraction d’éjection du ventricule gauche (Harel et. al. J Nucl Cardiol., 2007). L’étude portant sur 202 patients a démontré une excellente corrélation (r=0.84) avec la méthode de référence (ventriculographie planaire). La comparaison avec le logiciel QBS (Cedar-Sinai) démontrait un écart type du biais inférieur (7.44% vs 9.36%). De plus, le biais dans la mesure ne démontrait pas de corrélation avec la magnitude du paramètre pour notre méthodologie, contrairement au logiciel alterne. Le quatrième manuscrit portait sur la quantification de l’asynchronisme intra-ventriculaire gauche (Harel et. al. J Nucl Cardiol, 2008). Un nouveau paramètre tridimensionnel (CHI: contraction homogeneity index) (médiane 73.8% ; IQ 58.7% - 84.9%) permis d’intégrer les composantes d’amplitude et du synchronisme de la contraction ventriculaire. La validation de ce paramètre fut effectuée par comparaison avec la déviation standard de l’histogramme de phase (SDΦ) (médiane 28.2º ; IQ 17.5º - 46.8º) obtenu par la ventriculographie planaire lors d’une étude portant sur 235 patients. Ces quatre manuscrits, déjà publiés dans la littérature scientifique spécialisée, résument une fraction des travaux de recherche que nous avons effectués durant les trois dernières années. Ces travaux s’inscrivent dans deux axes majeurs de développement de la cardiologie du 21ième siècle.Cardiovascular diseases remain a major cause of mortality and morbidity in developed countries. The search for predictive determinants of vascular events represents a relevant and timely goal, considering the increasing costs of medical care and the progress in developing countries such as India, Brazil and China. Nuclear cardiology has, for 30 years, played an essential role in the diagnosis and prognosis of various cardiac and vascular diseases. Moreover, new developments will allow earlier and more specific detection of cardiac and peripheral atherosclerosis disease in affected individuals and in primary prevention. In this thesis, we will focus on advances in two major themes of nuclear cardiology. Endothelial dysfunction is regarded as the earliest pathological markers of atherosclerosis. Traditional cardiovascular risks factors impair endothelial function and can initiate the atherosclerosis process, even in the absence of overt endothelial disruption. Quantification of coronary endothelial function is, therefore, of considerable interest as an early biomarker for coronary disease. The radionuclide plethysmography methodology developed during the course of my doctoral studies allows the quantification of peripheral endothelial function, which has been correlated with coronary endothelial function. This methodology is detailed in the first manuscript (Harel et. al., Physiol Meas., 2007). The use of red blood cell radio-labeling permits arterial flow to be measured in the upper limb during local reactive hyperemia. This new procedure was validated against strain gauge plethysmography in a cohort of 26 patients with excellent reproducibility (intraclass coefficient of correlation = 0.89). Moreover, the arterial measurements of flow during the hyperemic reaction correlated well with the reference method (r=0.87). The second manuscript exposes the basis of infrared spectroscopy as a method for measuring arterial flow and quantifying the hyperemic reaction (Harel et. al., Physiol Meas., 2008). The study protocol consisted of simultaneous measurements by strain gauge, radionuclide and infrared spectroscopy plethysmography. The spectroscopy technique was shown to be precise and reproducible for forearm measurement of arterial blood flow. This novel procedure came major advantages in reducing artifacts and in its ease of use. The second axis of my thesis relates to the analysis of cardiac contraction synchrony. Indeed, more than 30% of patients receiving resynchronization therapy do not show clinical improvement. Moreover, this non-response rate is even higher if we consider morphological criteria of resynchronization (end-systolic volume reduction). There is therefore, an urgent need to improve a methodology to reliably and precisely measure cardiac dynamics so as to identify and monitor potential responders. The third manuscript exposes the basis of a new radionuclide technique to quantify left ventricle ejection fraction (Harel et. al. J Nucl Cardiol., 2007). The study of 202 patients showed an excellent correlation (r=0.84) with the reference method (planar ventriculography). The comparison with QBS software (Cedar-Sinai), showed a lower standard deviation of bias (7.44% vs 9.36%). Moreover, unlike the alternative software, the bias did not correlate with the magnitude of the ejection fraction. The fourth manuscript relates to the quantification of the left intra-ventricular synchronism (Harel et. al. J Nucl Cardiol, 2008). A new three-dimensional parameter (CHI: contraction homogeneity index) (median 73.8%; IQ 58.7% - 84.9%) was defined to allow the integration of amplitude and synchrony components of ventricular contraction. Validation of this parameter was undertaken out by comparing the standard deviation of the histogram of phase (SDΦ) (median 28.2º; IQ 17.5º- 46.8º) obtained by planar ventriculography in a study of 235 patients. These four manuscripts, already published in the specialized scientific literature, summarize a fraction of the research tasks that we have carried out during the three last years, representing two major axes of nuclear cardiology advancement in the 21st century

    Multidimensional embedded MEMS motion detectors for wearable mechanocardiography and 4D medical imaging

    Get PDF
    Background: Cardiovascular diseases are the number one cause of death. Of these deaths, almost 80% are due to coronary artery disease (CAD) and cerebrovascular disease. Multidimensional microelectromechanical systems (MEMS) sensors allow measuring the mechanical movement of the heart muscle offering an entirely new and innovative solution to evaluate cardiac rhythm and function. Recent advances in miniaturized motion sensors present an exciting opportunity to study novel device-driven and functional motion detection systems in the areas of both cardiac monitoring and biomedical imaging, for example, in computed tomography (CT) and positron emission tomography (PET). Methods: This Ph.D. work describes a new cardiac motion detection paradigm and measurement technology based on multimodal measuring tools — by tracking the heart’s kinetic activity using micro-sized MEMS sensors — and novel computational approaches — by deploying signal processing and machine learning techniques—for detecting cardiac pathological disorders. In particular, this study focuses on the capability of joint gyrocardiography (GCG) and seismocardiography (SCG) techniques that constitute the mechanocardiography (MCG) concept representing the mechanical characteristics of the cardiac precordial surface vibrations. Results: Experimental analyses showed that integrating multisource sensory data resulted in precise estimation of heart rate with an accuracy of 99% (healthy, n=29), detection of heart arrhythmia (n=435) with an accuracy of 95-97%, ischemic disease indication with approximately 75% accuracy (n=22), as well as significantly improved quality of four-dimensional (4D) cardiac PET images by eliminating motion related inaccuracies using MEMS dual gating approach. Tissue Doppler imaging (TDI) analysis of GCG (healthy, n=9) showed promising results for measuring the cardiac timing intervals and myocardial deformation changes. Conclusion: The findings of this study demonstrate clinical potential of MEMS motion sensors in cardiology that may facilitate in time diagnosis of cardiac abnormalities. Multidimensional MCG can effectively contribute to detecting atrial fibrillation (AFib), myocardial infarction (MI), and CAD. Additionally, MEMS motion sensing improves the reliability and quality of cardiac PET imaging.Moniulotteisten sulautettujen MEMS-liiketunnistimien käyttö sydänkardiografiassa sekä lääketieteellisessä 4D-kuvantamisessa Tausta: Sydän- ja verisuonitaudit ovat yleisin kuolinsyy. Näistä kuolemantapauksista lähes 80% johtuu sepelvaltimotaudista (CAD) ja aivoverenkierron häiriöistä. Moniulotteiset mikroelektromekaaniset järjestelmät (MEMS) mahdollistavat sydänlihaksen mekaanisen liikkeen mittaamisen, mikä puolestaan tarjoaa täysin uudenlaisen ja innovatiivisen ratkaisun sydämen rytmin ja toiminnan arvioimiseksi. Viimeaikaiset teknologiset edistysaskeleet mahdollistavat uusien pienikokoisten liiketunnistusjärjestelmien käyttämisen sydämen toiminnan tutkimuksessa sekä lääketieteellisen kuvantamisen, kuten esimerkiksi tietokonetomografian (CT) ja positroniemissiotomografian (PET), tarkkuuden parantamisessa. Menetelmät: Tämä väitöskirjatyö esittelee uuden sydämen kineettisen toiminnan mittaustekniikan, joka pohjautuu MEMS-anturien käyttöön. Uudet laskennalliset lähestymistavat, jotka perustuvat signaalinkäsittelyyn ja koneoppimiseen, mahdollistavat sydämen patologisten häiriöiden havaitsemisen MEMS-antureista saatavista signaaleista. Tässä tutkimuksessa keskitytään erityisesti mekanokardiografiaan (MCG), joihin kuuluvat gyrokardiografia (GCG) ja seismokardiografia (SCG). Näiden tekniikoiden avulla voidaan mitata kardiorespiratorisen järjestelmän mekaanisia ominaisuuksia. Tulokset: Kokeelliset analyysit osoittivat, että integroimalla usean sensorin dataa voidaan mitata syketiheyttä 99% (terveillä n=29) tarkkuudella, havaita sydämen rytmihäiriöt (n=435) 95-97%, tarkkuudella, sekä havaita iskeeminen sairaus noin 75% tarkkuudella (n=22). Lisäksi MEMS-kaksoistahdistuksen avulla voidaan parantaa sydämen 4D PET-kuvan laatua, kun liikeepätarkkuudet voidaan eliminoida paremmin. Doppler-kuvantamisessa (TDI, Tissue Doppler Imaging) GCG-analyysi (terveillä, n=9) osoitti lupaavia tuloksia sydänsykkeen ajoituksen ja intervallien sekä sydänlihasmuutosten mittaamisessa. Päätelmä: Tämän tutkimuksen tulokset osoittavat, että kardiologisilla MEMS-liikeantureilla on kliinistä potentiaalia sydämen toiminnallisten poikkeavuuksien diagnostisoinnissa. Moniuloitteinen MCG voi edistää eteisvärinän (AFib), sydäninfarktin (MI) ja CAD:n havaitsemista. Lisäksi MEMS-liiketunnistus parantaa sydämen PET-kuvantamisen luotettavuutta ja laatua

    Sources of inaccuracy in photoplethysmography for continuous cardiovascular monitoring

    Get PDF
    Photoplethysmography (PPG) is a low-cost, noninvasive optical technique that uses change in light transmission with changes in blood volume within tissue to provide information for cardiovascular health and fitness. As remote health and wearable medical devices become more prevalent, PPG devices are being developed as part of wearable systems to monitor parameters such as heart rate (HR) that do not require complex analysis of the PPG waveform. However, complex analyses of the PPG waveform yield valuable clinical information, such as: blood pressure, respiratory information, sympathetic nervous system activity, and heart rate variability. Systems aiming to derive such complex parameters do not always account for realistic sources of noise, as testing is performed within controlled parameter spaces. A wearable monitoring tool to be used beyond fitness and heart rate must account for noise sources originating from individual patient variations (e.g., skin tone, obesity, age, and gender), physiology (e.g., respiration, venous pulsation, body site of measurement, and body temperature), and external perturbations of the device itself (e.g., motion artifact, ambient light, and applied pressure to the skin). Here, we present a comprehensive review of the literature that aims to summarize these noise sources for future PPG device development for use in health monitoring

    Aerospace Medicine and Biology: A continuing bibliography (supplement 160)

    Get PDF
    This bibliography lists 166 reports, articles, and other documents introduced into the NASA scientific and technical information system in October 1976

    Development of a deep vein valve replacement

    Get PDF
    Background Chronic venous disease is a common, distressing and significant cause of health care expense. There have been few developments in the treatment of deep venous disease as the understanding of the clinical and pathophysiological significance of deep vein reflux and valve failure remains poor. Previous attempts to develop a prosthetic vein valve implant have been disappointing. Difficulties with early thrombosis led researchers to abandon their efforts many years ago. Attempts to create a valve implant should be revisited. Aims The aims of this project are to: evaluate variables around normal deep vein valves, to develop validated computational and laboratory flow models for deep venous function, and to develop and investigate a novel material to engineer a prototype bioprosthetic deep vein valve replacement. Methods Functional Anatomy: This is a prospective observational study evaluating subjects with normal deep veins. B and M Mode ultrasound, contrast (microbubble) enhanced ultrasound and dynamic magnetic resonance imaging of normal subjects was carried out. This has given the flow, velocity data and anatomical images required for the project. Modelling: A preliminary computational flow model has been developed using the data obtained from the imaging stage of the project. This is a 2-dimensional model incorprating flexible valve leaflets. A laboratory model of venous function, in the form of a flow rig has been created. Materials: Presently, polymers and polymer coated metal stents, used in the vascular system have several problems: they are very thrombogenic and they lack haemocompatibilty and biocompatibility, in addition they lack the required mechanical properties. A novel material that is biocompatible, a copolymer of methacrylolyoxyethyl phosphorylcholine (MPC), trimethylsilyl-2-propyl methacrylate (TMSPMA) and Hydroxypropyl methacrylate (HPMA), has been synthesised. Its properties have been modified by electrospinning and crosslinking to change its solubility and mechanical properties, without altering its biocompatibility. Impact This project aims to guide the development of a treatment for patients, for whom few options are available. Chronic venous disease and venous ulceration are painful and debilitating, potentially requiring years of treatment. Effective, minimally invasive treatment options could result in accelerated ulcer healing and improvements in symptoms and quality of life as well as reduced costs.Open Acces
    • …
    corecore