44 research outputs found

    Physical Layer Impairments Aware Dynamic Lightpath Provisioning In Mixed Line Rate Wdm Networks

    Get PDF
    Tez (Doktora) -- İstanbul Teknik Üniversitesi, Fen Bilimleri Enstitüsü, 2014Thesis (PhD) -- İstanbul Technical University, Institute of Science and Technology, 2014Bu tez çalışmasında, fiziksel katman bozukluklarını dikkate alarak, çoklu veri iletişim hızlı ağlarda dinamik olarak gelen bağlantı istekleri için ısıkyolu kurma problemi ele alınmıştır. Problemde verilenler; dinamik olarak gelen farklı kapasitelerde bağlantı istekleri, fiziksel topoloji, fiziksel hatların taşıyabildiği dalgaboyu miktarı, ağın anlık durumu ve fiziksel katman bozukluklarını dikkate alırken kullanılacak olan parametrelerdir. Problemde istenilen ise; gelen bağlantı isteklerinin mümkün olduğu kadar fazlasını kurabilmek maksadı ile uygun yol ve dalgaboyunun bulunmasıdır. Bunu gerçekleştirirken, hem kurulacak olan ışıkyolunun sinyal kalitesinin kabul edilebilir bit hata oranını karşılaması, hem de sistemde daha önceden kurulmuş olan ışıkyollarının sinyal kalitesinin kabul edilebilir sınırların altına inmesini engellemek gerekmektedir. Bu tez çalışmasında, kurulabilen ışıkyolu miktarını artırmak maksadı ile ışıkyolunun sisteme giriş gücü de ayrıca ele alınmıştır.In this thesis, we studied the impairment-aware lightpath provisioning problem for dynamic connection requests in MLR networks. Given, a dynamic connection request with a given rate, physical topology, number of wavelengths carried by each fiber, current network state, and PLI parameters, our aim is to determine the route and wavelength over which the lightpath should be set up, in order to be able to maximize the number of established connections while satisfying the given bit-error rate (BER) for the incoming connection, and to avoid disrupting the existing lightpaths. We also evaluate the launch power of the lightpath to maximize the established connections.DoktoraPh

    Characterization, design and re-optimization on multi-layer optical networks

    Get PDF
    L'augment de volum de tràfic IP provocat per l'increment de serveis multimèdia com HDTV o vídeo conferència planteja nous reptes als operadors de xarxa per tal de proveir transmissió de dades eficient. Tot i que les xarxes mallades amb multiplexació per divisió de longitud d'ona (DWDM) suporten connexions òptiques de gran velocitat, aquestes xarxes manquen de flexibilitat per suportar tràfic d’inferior granularitat, fet que provoca un pobre ús d'ample de banda. Per fer front al transport d'aquest tràfic heterogeni, les xarxes multicapa representen la millor solució. Les xarxes òptiques multicapa permeten optimitzar la capacitat mitjançant l'empaquetament de connexions de baixa velocitat dins de connexions òptiques de gran velocitat. Durant aquesta operació, es crea i modifica constantment una topologia virtual dinàmica gràcies al pla de control responsable d’aquestes operacions. Donada aquesta dinamicitat, un ús sub-òptim de recursos pot existir a la xarxa en un moment donat. En aquest context, una re-optimizació periòdica dels recursos utilitzats pot ser aplicada, millorant així l'ús de recursos. Aquesta tesi està dedicada a la caracterització, planificació, i re-optimització de xarxes òptiques multicapa de nova generació des d’un punt de vista unificat incloent optimització als nivells de capa física, capa òptica, capa virtual i pla de control. Concretament s'han desenvolupat models estadístics i de programació matemàtica i meta-heurístiques. Aquest objectiu principal s'ha assolit mitjançant cinc objectius concrets cobrint diversos temes oberts de recerca. En primer lloc, proposem una metodologia estadística per millorar el càlcul del factor Q en problemes d'assignació de ruta i longitud d'ona considerant interaccions físiques (IA-RWA). Amb aquest objectiu, proposem dos models estadístics per computar l'efecte XPM (el coll d'ampolla en termes de computació i complexitat) per problemes IA-RWA, demostrant la precisió d’ambdós models en el càlcul del factor Q en escenaris reals de tràfic. En segon lloc i fixant-nos a la capa òptica, presentem un nou particionament del conjunt de longituds d'ona que permet maximitzar, respecte el cas habitual, la quantitat de tràfic extra proveït en entorns de protecció compartida. Concretament, definim diversos models estadístics per estimar la quantitat de tràfic donat un grau de servei objectiu, i diferents models de planificació de xarxa amb l'objectiu de maximitzar els ingressos previstos i el valor actual net de la xarxa. Després de resoldre aquests problemes per xarxes reals, concloem que la nostra proposta maximitza ambdós objectius. En tercer lloc, afrontem el disseny de xarxes multicapa robustes davant de fallida simple a la capa IP/MPLS i als enllaços de fibra. Per resoldre aquest problema eficientment, proposem un enfocament basat en sobre-dimensionar l'equipament de la capa IP/MPLS i recuperar la connectivitat i el comparem amb la solució convencional basada en duplicar la capa IP/MPLS. Després de comparar solucions mitjançant models ILP i heurístiques, concloem que la nostra solució permet obtenir un estalvi significatiu en termes de costos de desplegament. Com a quart objectiu, introduïm un mecanisme adaptatiu per reduir l'ús de ports opto-electrònics (O/E) en xarxes multicapa sota escenaris de tràfic dinàmic. Una formulació ILP i diverses heurístiques són desenvolupades per resoldre aquest problema, que permet reduir significativament l’ús de ports O/E en temps molt curts. Finalment, adrecem el problema de disseny resilient del pla de control GMPLS. Després de proposar un nou model analític per quantificar la resiliència en topologies mallades de pla de control, usem aquest model per proposar un problema de disseny de pla de control. Proposem un procediment iteratiu lineal i una heurística i els usem per resoldre instàncies reals, arribant a la conclusió que es pot reduir significativament la quantitat d'enllaços del pla de control sense afectar la qualitat de servei a la xarxa.The explosion of IP traffic due to the increase of IP-based multimedia services such as HDTV or video conferencing poses new challenges to network operators to provide a cost-effective data transmission. Although Dense Wavelength Division Multiplexing (DWDM) meshed transport networks support high-speed optical connections, these networks lack the flexibility to support sub-wavelength traffic leading to poor bandwidth usage. To cope with the transport of that huge and heterogeneous amount of traffic, multilayer networks represent the most accepted architectural solution. Multilayer optical networks allow optimizing network capacity by means of packing several low-speed traffic streams into higher-speed optical connections (lightpaths). During this operation, a dynamic virtual topology is created and modified the whole time thanks to a control plane responsible for the establishment, maintenance, and release of connections. Because of this dynamicity, a suboptimal allocation of resources may exist at any time. In this context, a periodically resource reallocation could be deployed in the network, thus improving network resource utilization. This thesis is devoted to the characterization, planning, and re-optimization of next-generation multilayer networks from an integral perspective including physical layer, optical layer, virtual layer, and control plane optimization. To this aim, statistical models, mathematical programming models and meta-heuristics are developed. More specifically, this main objective has been attained by developing five goals covering different open issues. First, we provide a statistical methodology to improve the computation of the Q-factor for impairment-aware routing and wavelength assignment problems (IA-RWA). To this aim we propose two statistical models to compute the Cross-Phase Modulation variance (which represents the bottleneck in terms of computation time and complexity) in off-line and on-line IA-RWA problems, proving the accuracy of both models when computing Q-factor values in real traffic scenarios. Second and moving to the optical layer, we present a new wavelength partitioning scheme that allows maximizing the amount of extra traffic provided in shared path protected environments compared with current solutions. Specifically, we define several statistical models to estimate the traffic intensity given a target grade of service, and different network planning problems for maximizing the expected revenues and net present value. After solving these problems for real networks, we conclude that our proposed scheme maximizes both revenues and NPV. Third, we tackle the design of survivable multilayer networks against single failures at the IP/MPLS layer and WSON links. To efficiently solve this problem, we propose a new approach based on over-dimensioning IP/MPLS devices and lightpath connectivity and recovery and we compare it against the conventional solution based on duplicating backbone IP/MPLS nodes. After evaluating both approaches by means of ILP models and heuristic algorithms, we conclude that our proposed approach leads to significant CAPEX savings. Fourth, we introduce an adaptive mechanism to reduce the usage of opto-electronic (O/E) ports of IP/MPLS-over-WSON multilayer networks in dynamic scenarios. A ILP formulation and several heuristics are developed to solve this problem, which allows significantly reducing the usage of O/E ports in very short running times. Finally, we address the design of resilient control plane topologies in GMPLS-enabled transport networks. After proposing a novel analytical model to quantify the resilience in mesh control plane topologies, we use this model to propose a problem to design the control plane topology. An iterative model and a heuristic are proposed and used to solve real instances, concluding that a significant reduction in the number of control plane links can be performed without affecting the quality of service of the network

    A survey on OFDM-based elastic core optical networking

    Get PDF
    Orthogonal frequency-division multiplexing (OFDM) is a modulation technology that has been widely adopted in many new and emerging broadband wireless and wireline communication systems. Due to its capability to transmit a high-speed data stream using multiple spectral-overlapped lower-speed subcarriers, OFDM technology offers superior advantages of high spectrum efficiency, robustness against inter-carrier and inter-symbol interference, adaptability to server channel conditions, etc. In recent years, there have been intensive studies on optical OFDM (O-OFDM) transmission technologies, and it is considered a promising technology for future ultra-high-speed optical transmission. Based on O-OFDM technology, a novel elastic optical network architecture with immense flexibility and scalability in spectrum allocation and data rate accommodation could be built to support diverse services and the rapid growth of Internet traffic in the future. In this paper, we present a comprehensive survey on OFDM-based elastic optical network technologies, including basic principles of OFDM, O-OFDM technologies, the architectures of OFDM-based elastic core optical networks, and related key enabling technologies. The main advantages and issues of OFDM-based elastic core optical networks that are under research are also discussed

    Software Defined Applications in Cellular and Optical Networks

    Get PDF
    abstract: Small wireless cells have the potential to overcome bottlenecks in wireless access through the sharing of spectrum resources. A novel access backhaul network architecture based on a Smart Gateway (Sm-GW) between the small cell base stations, e.g., LTE eNBs, and the conventional backhaul gateways, e.g., LTE Servicing/Packet Gateways (S/P-GWs) has been introduced to address the bottleneck. The Sm-GW flexibly schedules uplink transmissions for the eNBs. Based on software defined networking (SDN) a management mechanism that allows multiple operator to flexibly inter-operate via multiple Sm-GWs with a multitude of small cells has been proposed. This dissertation also comprehensively survey the studies that examine the SDN paradigm in optical networks. Along with the PHY functional split improvements, the performance of Distributed Converged Cable Access Platform (DCCAP) in the cable architectures especially for the Remote-PHY and Remote-MACPHY nodes has been evaluated. In the PHY functional split, in addition to the re-use of infrastructure with a common FFT module for multiple technologies, a novel cross functional split interaction to cache the repetitive QAM symbols across time at the remote node to reduce the transmission rate requirement of the fronthaul link has been proposed.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201

    Enabling Technologies for Cognitive Optical Networks

    Get PDF

    Exploiting optical signal analysis for autonomous communications

    Get PDF
    (English) Optical communications have been extensively investigated and enhanced in the last decades. Nowadays, they are responsible to transport all the data traffic generated around the world, from access to the core network segments. As the data traffic is increasing and changing in both type and patterns, the optical communications networks and systems need to readapt and continuous advances to face the future data traffic demands in an efficient and cost-effective way. This PhD thesis focuses on investigate and analyze the optical signals in order to extract useful knowledge from them to support the autonomous lightpath operation, as well as to lightpath characterization. The first objective of this PhD thesis is to investigate the optical transmission feasibility of optical signals based on high-order modulation formats (MF) and high symbol rates (SR) in hybrid filterless, filtered and flexible optical networks. It is expected a higher physical layer impairments impact on these kinds of optical signals that can lead to degradation of the quality of transmission. In particular, the impact of the optical filter narrowing arising from the node cascade is evaluated. The obtained simulation results for the required optical-signal-to-noise ratio in a cascade up to 10 optical nodes foresee the applicability of these kinds of optical signals in such scenarios. By using high-order MF and high SR, the number of the optical transponders cab be reduced, as well as the spectral efficiency is enhanced. The second objective focuses on MF and SR identification at the optical receiver side to support the autonomous lightpath operation. Nowadays, optical transmitters can generate several optical signal configurations in terms of MF and SR. To increase the autonomous operation of the optical receiver, it is desired it can autonomously recognize the MF and SR of the incoming optical signals. In this PhD thesis, we propose an accurate and low complex MF and SR identification algorithm based on optical signal analysis and minimum Euclidean distance to the expected points when the received signals are decoded with several available MF and SR. The extensive simulation results show remarkable accuracy under several realistic lightpath scenarios, based on different fiber types, including linear and nonlinear noise interference, as well as in single and multicarrier optical systems. The final objective of this PhD thesis is the deployment of a machine learning-based digital twin for optical constellations analysis and modeling. An optical signal along its lightpath in the optical network is impaired by several effects. These effects can be linear, e.g., the noise coming from the optical amplification, or nonlinear ones, e.g., the Kerr effects from the fiber propagation. The optical constellations are a good source of information regarding these effects, both linear and nonlinear. Thus, by an accurate and deep analysis of the received optical signals, visualized in optical constellations, we can extract useful information from them to better understand the several impacts along the crossed lightpath. Furthermore, by learning the different impacts from different optical network elements on the optical signal, we can accurately model it in order to create a partial digital twin of the optical physical layer. The proposed digital twin shows accurate results in modeled lightpaths including both linear and nonlinear interference noise, in several lightpaths configuration, i.e., based on different kind of optical links, optical powers and optical fiber parameters. In addition, the proposed digital twin can be useful to predict quality of transmission metrics, such as bit error rate, in typical lightpath scenarios, as well as to detect possible misconfigurations in optical network elements by cooperation with the software-defined networking controller and monitoring and data analytics agents.(Español) Las comunicaciones ópticas han sido ampliamente investigadas y mejoradas en las últimas décadas. En la actualidad, son las encargadas de transportar la mayoría del tráfico de datos que se genera en todo el mundo, desde el acceso hasta los segmentos de la red troncal. A medida que el tráfico de datos aumenta y cambia tanto en tipo como en patrones, las redes y los sistemas de comunicaciones ópticas necesitan readaptarse y avanzar continuamente para, de una manera eficiente y rentable, hacer frente a las futuras demandas de tráfico de datos. Esta tesis doctoral se centra en investigar y analizar las señales ópticas con el fin de extraer de ellas conocimiento útil para apoyar el funcionamiento autónomo de las conexiones ópticas, así como para su caracterización. El primer objetivo de esta tesis doctoral es investigar la viabilidad de transmisión de señales ópticas basadas en formatos de modulación de alto orden y altas tasas de símbolos en redes ópticas híbridas con y sin filtros. Se espera un mayor impacto de las degradaciones de la capa física en este tipo de señales ópticas que pueden conducir a la degradación de la calidad de transmisión. En particular, se evalúa el impacto de la reducción del ancho de banda del filtro óptico que surge tras atravesar una cascada de nodos. Los resultados de simulación obtenidos para la relación señal óptica/ruido requerida en una cascada de hasta 10 nodos ópticos prevén la aplicabilidad de este tipo de señales ópticas en tales escenarios. Mediante el uso de modulación de alto orden y altas tasas de símbolos, se reduce el número de transpondedores ópticos y se mejora la eficiencia espectral. El segundo objetivo se centra en la identificación de formatos de modulación y tasas de símbolos en el lado del receptor óptico para respaldar la operación autónoma de la conexión óptica. Para aumentar el funcionamiento autónomo del receptor óptico, se desea que pueda reconocer de forma autónoma la configuración de las señales ópticas entrantes. En esta tesis doctoral, proponemos un algoritmo de identificación de formatos de modulación y tasas de símbolos preciso y de baja complejidad basado en el análisis de señales ópticas cuando las señales recibidas se decodifican con varios formatos de modulación y tasas de símbolos disponibles. Los extensos resultados de la simulación muestran una precisión notable en varios escenarios realistas, basados en diferentes tipos de fibra, incluida la interferencia de ruido lineal y no lineal, así como en sistemas ópticos de portadora única y múltiple. El objetivo final de esta tesis doctoral es el despliegue de un gemelo digital basado en aprendizaje automático para el análisis y modelado de constelaciones ópticas. Una señal óptica a lo largo de su trayectoria en la red óptica se ve afectada por varios efectos, pueden ser lineales o no lineales. Las constelaciones ópticas son una buena fuente de información sobre estos efectos, tanto lineales como no lineales. Por lo tanto, mediante un análisis preciso y profundo de las señales ópticas recibidas, visualizadas en constelaciones ópticas, podemos extraer información útil de ellas para comprender mejor los diversos impactos a lo largo del camino propagado. Además, al aprender los diferentes impactos de los diferentes elementos de la red óptica en la señal óptica, podemos modelarla con precisión para crear un gemelo digital parcial de la camada física óptica. El gemelo digital propuesto muestra resultados precisos en conexiones que incluyen ruido de interferencia tanto lineal como no lineal, en varias configuraciones basados en diferentes tipos de enlaces ópticos, potencias ópticas y parámetros de fibra óptica. Además, el gemelo digital propuesto puede ser útil para predecir la calidad de las métricas de transmisión así como para detectar posibles errores de configuración en los elementos de la red óptica mediante la cooperación con el controlador de red, el monitoreo y agentes de análisis de datosPostprint (published version
    corecore