Non-Silicon MOSFETs and Circuits with Atomic Layer Deposited Higher-k Dielectrics

The quest for technologies beyond 14nm node complementary metal-oxide-semiconductor (CMOS) devices has now called for research on higher-k gate dielectrics integration with high mobility channel materials such as III-V semiconductors and germanium. Ternary oxides, such as La2-xYxO3 and LaAlO3, have been considered as strong candidates due to their high dielectric constants and good thermal stability. Meanwhile, the unique abilities of delivering large area uniform thin film, excellent controlling of composition and thickness to an atomic level, which are keys to ultra-scaled devices, have made atomic layer deposition (ALD) technique an excellent choice. In this thesis, we systematically study the atomic layer epitaxy (ALE) process realized by ALD, ALE higher-k dielectric integration, GaAs nMOSFETs and pMOSFETs on (111)A substrates, and their related CMOS digital logic gate circuits as well as ring oscillators. A record high drain current of 376 mA/mm and a small SS of 74 mV/dec are obtained from planar GaAs nMOSFETs with 1μm gate length. La2-xYxO3/GaAs(111)A interfaces are systematically investigated in both material and electrical aspects. The work has expanded the near 50 years GaAs MOSFETs research to an unprecedented level. Following the GaAs work, Ge n- and p-MOSFETs with epitaxial interfaces are also fabricated and studied. Beyond the conventional semiconductors, the complex oxide channel material SrTiO3 is also explored. Well-behaved LaAlO3/SrTiO3 nMOSFETs with a conducting channel at insulating ALD amorphous LaAlO3 - insulating crystalline SrTiO3 interface are also demonstrated

Investigation of the electrical properties of Si₁-×Ge× channel pMOSFETs with high-κ dielectrics

It is now apparent that the continued performance enhancements of silicon metal-oxide-semiconductor field effect transistors (MOSFETs) can no longer be met by scaling alone. High-mobility channel materials such as strained Si1-xGex and Ge are now being seriously considered to maintain the performance requirements specified by the semiconductor industry. In addition, alternative gate dielectric, or high-κ dielectrics, will also be required to meet gate leakage requirements. This work investigates the properties of using strained Si1-xGex or Ge as alternative channel materials for pMOSFETs incorporating hafnium oxide (HfO2) high-κ gate dielectric. Whilst the SiGe pMOSFETs (x = 0.25) exhibited an enhancement in hole mobility (300 K) over comparable silicon control pMOSFETs with sputtered HfO2 dielectric, high Coulomb scattering and surface roughness scattering relating to the dielectric deposition process meant that the effective hole mobilities were degraded with respect to the silicon universal curve. Germanium channel pMOSFETs with halo-doping and HfO2 gate dielectric deposited by atomic layer deposition showed high hole mobilities of 230 cm2V-1s-1 and 480 cm2V-1s-1 at room temperature and 77 K, respectively. Analysis of the off-state current for the Ge pMOSFETs over a range of temperatures indicated that band-to-band tunnelling, gate-induced drain leakage and other defect-assisted leakage mechanisms could all be important. Hole carrier velocity and impact ionisation were also studied in two batches of buried channel SiGe pMOSFET with x = 0.15 and x = 0.36, respectively. SiGe channel pMOSFETs were found to exhibit reduced impact ionisation compared to silicon control devices, which has been attributed to a strain-induced reduction of the density of states in the SiGe conduction and valence bands. Analysis of the hole carrier velocity indicated that pseudomorphic SiGe offered no performance enhancements over Si below 100 nm, possibly due to higher ion implantation damage and strain relaxation of the strained SiGe channel. The results indicate that velocity overshoot effects might not provide the performance improvements at short channel lengths that was previously hoped for

Investigation of the electrical properties of Si₁-xGex channel pMOSFETs with high-κ dielectrics

It is now apparent that the continued performance enhancements of silicon metal-oxide-semiconductor field effect transistors (MOSFETs) can no longer be met by scaling alone. High-mobility channel materials such as strained Si1-xGex and Ge are now being seriously considered to maintain the performance requirements specified by the semiconductor industry. In addition, alternative gate dielectric, or high-? dielectrics, will also be required to meet gate leakage requirements. This work investigates the properties of using strained Si1-xGex or Ge as alternative channel materials for pMOSFETs incorporating hafnium oxide (HfO2) high-? gate dielectric. Whilst the SiGe pMOSFETs (x = 0.25) exhibited an enhancement in hole mobility (300 K) over comparable silicon control pMOSFETs with sputtered HfO2 dielectric, high Coulomb scattering and surface roughness scattering relating to the dielectric deposition process meant that the effective hole mobilities were degraded with respect to the silicon universal curve. Germanium channel pMOSFETs with halo-doping and HfO2 gate dielectric deposited by atomic layer deposition showed high hole mobilities of 230 cm2V-1s-1 and 480 cm2V-1s-1 at room temperature and 77 K, respectively. Analysis of the off-state current for the Ge pMOSFETs over a range of temperatures indicated that band-to-band tunnelling, gate-induced drain leakage and other defect-assisted leakage mechanisms could all be important. Hole carrier velocity and impact ionisation were also studied in two batches of buried channel SiGe pMOSFET with x = 0.15 and x = 0.36, respectively. SiGe channel pMOSFETs were found to exhibit reduced impact ionisation compared to silicon control devices, which has been attributed to a strain-induced reduction of the density of states in the SiGe conduction and valence bands. Analysis of the hole carrier velocity indicated that pseudomorphic SiGe offered no performance enhancements over Si below 100 nm, possibly due to higher ion implantation damage and strain relaxation of the strained SiGe channel. The results indicate that velocity overshoot effects might not provide the performance improvements at short channel lengths that was previously hoped for.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Extending Si CMOS: InGaAs and GeSn High Mobility Channel Transistors for Future High Speed and Low Power Applications

Ph.DDOCTOR OF PHILOSOPH

Journal of Telecommunications and Information Technology, 2004, nr 1

kwartalni

The development of planar high-K/III-V p-channel MOSFETs for post-silicon CMOS

Conventional Si complementary-metal-oxide-semiconductor (CMOS) scaling is fast approaching its limits. The extension of the logic device roadmap for future enhancements in transistor performance requires non-Si materials and new device architectures. III-V materials, due to their superior electron transport properties, are well poised to replace Si as the channel material beyond the 10nm technology node to mitigate the performance loss of Si transistors from further reductions in supply voltage to minimise power dissipation in logic circuits. However several key challenges, including a high quality dielectric/III-V gate stack, a low-resistance source/drain (S/D) technology, heterointegration onto a Si platform and a viable III-V p-metal-oxide-semiconductor field-effect-transistor (MOSFET), need to be addressed before III-Vs can be employed in CMOS. This Thesis specifically addressed the development and demonstration of planar III-V p-MOSFETs, to complement the n-MOSFET, thereby enabling an all III-V CMOS technology to be realised. This work explored the application of InGaAs and InGaSb material systems as the channel, in conjunction with Al2O3/metal gate stacks, for p-MOSFET development based on the buried-channel flatband device architecture. The body of work undertaken comprised material development, process module development and integration into a robust fabrication flow for the demonstration of p-channel devices. The parameter space in the design of the device layer structure, based around the III-V channel/barrier material options of Inx≥0.53Ga1-xAs/In0.52Al0.48As and Inx≥0.1Ga1-xSb/AlSb, was systematically examined to improve hole channel transport. A mobility of 433 cm2/Vs, the highest room temperature hole mobility of any InGaAs quantum-well channel reported to date, was obtained for the In0.85Ga0.15As (2.1% strain) structure. S/D ohmic contacts were developed based on thermally annealed Au/Zn/Au metallisation and validated using transmission line model test structures. The effects of metallisation thickness, diffusion barriers and de-oxidation conditions were examined. Contacts to InGaSb-channel structures were found to be sensitive to de-oxidation conditions. A fabrication process, based on a lithographically-aligned double ohmic patterning approach, was realised for deep submicron gate-to-source/drain gap (Lside) scaling to minimise the access resistance, thereby mitigating the effects of parasitic S/D series resistance on transistor performance. The developed process yielded gaps as small as 20nm. For high-k integration on GaSb, ex-situ ammonium sulphide ((NH4)2S) treatments, in the range 1%-22%, for 10min at 295K were systematically explored for improving the electrical properties of the Al2O3/GaSb interface. Electrical and physical characterisation indicated the 1% treatment to be most effective with interface trap densities in the range of 4 - 10×1012cm-2eV-1 in the lower half of the bandgap. An extended study, comprising additional immersion times at each sulphide concentration, was further undertaken to determine the surface roughness and the etching nature of the treatments on GaSb. A number of p-MOSFETs based on III-V-channels with the most promising hole transport and integration of the developed process modules were successfully demonstrated in this work. Although the non-inverted InGaAs-channel devices showed good current modulation and switch-off characteristics, several aspects of performance were non-ideal; depletion-mode operation, modest drive current (Id,sat=1.14mA/mm), double peaked transconductance (gm=1.06mS/mm), high subthreshold swing (SS=301mV/dec) and high on-resistance (Ron=845kΩ.μm). Despite demonstrating substantial improvement in the on-state metrics of Id,sat (11×), gm (5.5×) and Ron (5.6×), inverted devices did not switch-off. Scaling gate-to-source/drain gap (Lside) from 1μm down to 70nm improved Id,sat (72.4mA/mm) by a factor of 3.6 and gm (25.8mS/mm) by a factor of 4.1 in inverted InGaAs-channel devices. Well-controlled current modulation and good saturation behaviour was observed for InGaSb-channel devices. In the on-state In0.3Ga0.7Sb-channel (Id,sat=49.4mA/mm, gm=12.3mS/mm, Ron=31.7kΩ.μm) and In0.4Ga0.6Sb-channel (Id,sat=38mA/mm, gm=11.9mS/mm, Ron=73.5kΩ.μm) devices outperformed the InGaAs-channel devices. However the devices could not be switched off. These findings indicate that III-V p-MOSFETs based on InGaSb as opposed to InGaAs channels are more suited as the p-channel option for post-Si CMOS

Silicon Nanodevices

This book is a collection of scientific articles which brings research in Si nanodevices, device processing, and materials. The content is oriented to optoelectronics with a core in electronics and photonics. The issue of current technology developments in the nanodevices towards 3D integration and an emerging of the electronics and photonics as an ultimate goal in nanotechnology in the future is presented. The book contains a few review articles to update the knowledge in Si-based devices and followed by processing of advanced nano-scale transistors. Furthermore, material growth and manufacturing of several types of devices are presented. The subjects are carefully chosen to critically cover the scientific issues for scientists and doctoral students

Radiation Tolerant Electronics, Volume II

Research on radiation tolerant electronics has increased rapidly over the last few years, resulting in many interesting approaches to model radiation effects and design radiation hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation hardened electronics for space applications, high-energy physics experiments such as those on the large hadron collider at CERN, and many terrestrial nuclear applications, including nuclear energy and safety management. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their ionizing radiation susceptibility has raised many exciting challenges, which are expected to drive research in the coming decade.After the success of the first Special Issue on Radiation Tolerant Electronics, the current Special Issue features thirteen articles highlighting recent breakthroughs in radiation tolerant integrated circuit design, fault tolerance in FPGAs, radiation effects in semiconductor materials and advanced IC technologies and modelling of radiation effects