197 research outputs found
Hard-input-hard-output capacity analysis of UWB BPSK systems with timing errors
The hard-input-hard-output capacity of a binary phase-shift keying (BPSK) ultrawideband system is analyzed for both additive white Gaussian noise and multipath fading channels with timing errors. Unlike previous works that calculate the capacity with perfect synchronization and/or multiple-access interference only, our analysis considers timing errors with different distributions, as well as the interpath (IPI), interchip (ICI), and intersymbol (ISI) interferences, as in practical systems. The sensitivity of the channel capacity to the timing error is examined. The effects of pulse shape, the multiple-access technique, the number of users, and the number of chips are studied. It is found that time hopping is less sensitive to the pulse shape and that the timing error has higher capacity than direct sequence due to its low duty of cycle. Using these results, one can choose appropriate system parameters for different applications
Ultra-wideband technology for short-range wireless communication
The ultra-wideband (UWB) radio core idea is to open large amounts of spectrum to a variety of users with little mutual interference between them. While ultra-wideband is being championed by several commercial companies, this technology has not followed the conventional path where commercial interest is preceded by years of academic research. This work attempts to fill in some of the gap by studying fundamental properties of communications with impulse-based radio UWB signals. We study jam resistance and capacity of UWB. Jam resistance is analyzed for binary pulse position modulation (PPM) with the interference being modeled as correlated Gaussian. Closed-form expressions are provided for the jam resistance of a PPM UWB system utilizing rectangular pulses. Simple approximations are obtained for special cases (narrowband interference). Such analysis is extended to other practical UWB waveforms such as Gaussian and Rayleigh monocycles. It is shown that under some conditions, the UWB jam resistance is superior to that of direct sequence spread spectrum (DS-SS). In the second part of this work, we study the capacity of the single-user UWB communication systems utilizing M-ary PPM and bi-phase as well as on-off keying modulation scheme over additive white Gaussian noise (AWGN) and multipath channels. Starting from the known capacity of M-ary modulated signals, the computation of UWB capacity over the AWGN channel takes into account UWB specific constraints. The constraints are the power spectrum density limitation under Federal Communications Commission (FCC) Part 15 rules and the spreading ratio required to achieve a specified jam resistance level. UWB capacity over AWGN channel is expressed as a function of spreading ratio and communication range. Trade-offs between capacity and range of communications and between capacity and spreading ratio are explored. We extend the study of capacity of UWB communications to the multipath channel using the modified S-V model proposed by the IEEE 802.15.3a task group. The complementary cumulative distribution function (CCDF) of the capacities, subject to the FCC power spectral density (PSD) limitation, are obtained for the all Rake (ARake) and selective Rake (SRake) receivers. In both of the cases, maximum ratio combining is employed. Finally, the capacity of multiple-access UWB communications is studied over the AWGN channel. Under certain assumptions, the multiple-access noise component at the receiver is modeled as Gaussian. An expression for the UWB capacity of the multiple-access channel is developed as a function of number of users
Ultra Wide Band Multiple Access Performance Using TH-PPM and DS-BPSK Modulations
The increasing demand for portable, high data rate communications has focused much attention on wireless technology. Ultra Wide Band (UWB) waveforms have the ability to deliver megabits of information while maintaining low average power consumption. In accordance with recent FCC ruling, UWB systems are now allowed to operate in the unlicensed spectrum of 3.1 to 10.6 GHz, motivating renewed interest in the forty year old concept of impulse radio. Gaussian monocycles produce UWB waveforms occupying large bandwidths with multiple access (MA) capability enabled by spread spectrum techniques. Time Hopping (TH) and Direct Sequence (DS) modulations are considered here for UWB MA applications. This work extends Gold coding results and characterizes UWB performance using Simulated Annealing (SA) and Random Integer (RI) codes for TH and DS UWB applications. TH-PPM and DS-BPSK performance is evaluated using simulated probability of bit error P(sub b) under MA interference (MAI), multipath interference (MPI), and narrow band interference (NBI) conditions for synchronous and asynchronous networks
A General Framework for Analyzing, Characterizing, and Implementing Spectrally Modulated, Spectrally Encoded Signals
Fourth generation (4G) communications will support many capabilities while providing universal, high speed access. One potential enabler for these capabilities is software defined radio (SDR). When controlled by cognitive radio (CR) principles, the required waveform diversity is achieved via a synergistic union called CR-based SDR. Research is rapidly progressing in SDR hardware and software venues, but current CR-based SDR research lacks the theoretical foundation and analytic framework to permit efficient implementation. This limitation is addressed here by introducing a general framework for analyzing, characterizing, and implementing spectrally modulated, spectrally encoded (SMSE) signals within CR-based SDR architectures. Given orthogonal frequency division multiplexing (OFDM) is a 4G candidate signal, OFDM-based signals are collectively classified as SMSE since modulation and encoding are spectrally applied. The proposed framework provides analytic commonality and unification of SMSE signals. Applicability is first shown for candidate 4G signals, and resultant analytic expressions agree with published results. Implementability is then demonstrated in multiple coexistence scenarios via modeling and simulation to reinforce practical utility
Channel division multiple access: The access solution for UWB networks
International audience—In this paper we study a promising multiple access scheme entitled Channel Division Multiple Access (ChDMA). ChDMA was developed to cope with the particularities of low duty cycle Impulsive Radio Ultra Wideband systems (IR-UWB). The idea is based upon the fact that Channel Impulse Responses (CIR) could be exploited as users signatures. Based on the knowledge of the CIRs at the receiver, transmitted signals can be detected and estimated in a very similar approach as performed by DS-CDMA systems. We present in this contribution initial analysis of the spectral efficiency performance of ChDMA systems. As a matter of fact, ChDMA overcomes the multiple access paradigm of impulsive-radio signaling and provides an efficient and low complex technique to exploit the diversity of UWB communications. For the study, we consider three different receiver structures: optimal receiver, matched filter (MF) and linear minimum mean square error receiver (l-MMSE). As a result, it is shown that under certain conditions ChDMA can even outperform CDMA in terms of Shannon's capacity, providing a real option for future communication systems
Ultra Wideband Communications: from Analog to Digital
Ultrabreitband-Signale (Ultra Wideband [UWB]) können einen
signifikanten Nutzen im Bereich drahtloser Kommunikationssysteme haben. Es
sind jedoch noch einige Probleme offen, die durch Systemdesigner und
Wissenschaftler gelöst werden müssen. Ein Funknetzsystem mit einer derart
großen Bandbreite ist normalerweise auch durch eine große Anzahl an
Mehrwegekomponenten mit jeweils verschiedenen Pfadamplituden
gekennzeichnet. Daher ist es schwierig, die zeitlich verteilte Energie
effektiv zu erfassen. Außerdem ist in vielen Fällen der naheliegende
Ansatz, ein kohärenter Empfänger im Sinne eines signalangepassten Filters
oder eines Korrelators, nicht unbedingt die beste Wahl. In der vorliegenden
Arbeit wird dabei auf die bestehende Problematik und weitere
Lösungsmöglichkeiten eingegangen.
Im ersten Abschnitt geht es um „Impulse Radio UWB”-Systeme mit
niedriger Datenrate. Bei diesen Systemen kommt ein inkohärenter Empfänger
zum Einsatz. Inkohärente Signaldetektion stellt insofern einen
vielversprechenden Ansatz dar, als das damit aufwandsgünstige und robuste
Implementierungen möglich sind. Dies trifft vor allem in Anwendungsfällen
wie den von drahtlosen Sensornetzen zu, wo preiswerte Geräte mit langer
Batterielaufzeit nötigsind. Dies verringert den für die Kanalschätzung
und die Synchronisation nötigen Aufwand, was jedoch auf Kosten der
Leistungseffizienz geht und eine erhöhte Störempfindlichkeit gegenüber
Interferenz (z.B. Interferenz durch mehrere Nutzer oder schmalbandige
Interferenz) zur Folge hat.
Um die Bitfehlerrate der oben genannten Verfahren zu bestimmen, wurde
zunächst ein inkohärenter Combining-Verlust spezifiziert, welcher
auftritt im Gegensatz zu kohärenter Detektion mit Maximum Ratio Multipath
Combining. Dieser Verlust hängt von dem Produkt aus der Länge des
Integrationsfensters und der Signalbandbreite ab.
Um den Verlust durch inkohärentes Combining zu reduzieren und somit die
Leistungseffizienz des Empfängers zu steigern, werden verbesserte
Combining-Methoden für Mehrwegeempfang vorgeschlagen. Ein analoger
Empfänger, bei dem der Hauptteil des Mehrwege-Combinings durch einen
„Integrate and Dump”-Filter implementiert ist, wird für UWB-Systeme
mit Zeit-Hopping gezeigt. Dabei wurde die Einsatzmöglichkeit von dünn
besetzten Codes in solchen System diskutiert und bewertet. Des Weiteren
wird eine Regel für die Code-Auswahl vorgestellt, welche die Stabilität
des Systems gegen Mehrnutzer-Störungen sicherstellt und gleichzeitig den
Verlust durch inkohärentes Combining verringert.
Danach liegt der Fokus auf digitalen Lösungen bei inkohärenter
Demodulation. Im Vergleich zum Analogempfänger besitzt ein
Digitalempfänger einen Analog-Digital-Wandler im Zeitbereich gefolgt von
einem digitalen Optimalfilter. Der digitale Optimalfilter dekodiert den
Mehrfachzugriffscode kohärent und beschränkt das inkohärente Combining
auf die empfangenen Mehrwegekomponenten im Digitalbereich. Es kommt ein
schneller Analog-Digital-Wandler mit geringer Auflösung zum Einsatz, um
einen vertretbaren Energieverbrauch zu gewährleisten. Diese Digitaltechnik
macht den Einsatz langer Analogverzögerungen bei differentieller
Demodulation unnötig und ermöglicht viele Arten der digitalen
Signalverarbeitung. Im Vergleich zur Analogtechnik reduziert sie nicht nur
den inkohärenten Combining-Verlust, sonder zeigt auch eine stärkere
Resistenz gegenüber Störungen. Dabei werden die Auswirkungen der
Auflösung und der Abtastrate der Analog-Digital-Umsetzung analysiert. Die
Resultate zeigen, dass die verminderte Effizienz solcher
Analog-Digital-Wandler gering ausfällt. Weiterhin zeigt sich, dass im
Falle starker Mehrnutzerinterferenz sogar eine Verbesserung der Ergebnisse
zu beobachten ist. Die vorgeschlagenen Design-Regeln spezifizieren die
Anwendung der Analog-Digital-Wandler und die Auswahl der Systemparameter in
Abhängigkeit der verwendeten Mehrfachzugriffscodes und der Modulationsart.
Wir zeigen, wie unter Anwendung erweiterter Modulationsverfahren die
Leistungseffizienz verbessert werden kann und schlagen ein Verfahren zur
Unterdrückung schmalbandiger Störer vor, welches auf Soft Limiting
aufbaut. Durch die Untersuchungen und Ergebnissen zeigt sich, dass
inkohärente Empfänger in UWB-Kommunikationssystemen mit niedriger
Datenrate ein großes Potential aufweisen.
Außerdem wird die Auswahl der benutzbaren Bandbreite untersucht, um einen
Kompromiss zwischen inkohärentem Combining-Verlust und Stabilität
gegenüber langsamen Schwund zu erreichen. Dadurch wurde ein neues Konzept
für UWB-Systeme erarbeitet: wahlweise kohärente oder inkohärente
Empfänger, welche als UWB-Systeme Frequenz-Hopping nutzen. Der wesentliche
Vorteil hiervon liegt darin, dass die Bandbreite im Basisband sich deutlich
verringert. Mithin ermöglicht dies einfach zu realisierende digitale
Signalverarbeitungstechnik mit kostengünstigen Analog-Digital-Wandlern.
Dies stellt eine neue Epoche in der Forschung im Bereich drahtloser
Sensorfunknetze dar.
Der Schwerpunkt des zweiten Abschnitts stellt adaptiven Signalverarbeitung
für hohe Datenraten mit „Direct Sequence”-UWB-Systemen in den
Vordergrund. In solchen Systemen entstehen, wegen der großen Anzahl der
empfangenen Mehrwegekomponenten, starke Inter- bzw.
Intrasymbolinterferenzen. Außerdem kann die Funktionalität des Systems
durch Mehrnutzerinterferenz und Schmalbandstörungen deutlich beeinflusst
werden. Um sie zu eliminieren, wird die „Widely Linear”-Rangreduzierung
benutzt. Dabei verbessert die Rangreduzierungsmethode das
Konvergenzverhalten, besonders wenn der gegebene Vektor eine sehr große
Anzahl an Abtastwerten beinhaltet (in Folge hoher einer Abtastrate).
Zusätzlich kann das System durch die Anwendung der R-linearen Verarbeitung
die Statistik zweiter Ordnung des nicht-zirkularen Signals vollständig
ausnutzen, was sich in verbesserten Schätzergebnissen widerspiegelt.
Allgemeine kann die Methode der „Widely Linear”-Rangreduzierung auch in
andern Bereichen angewendet werden, z.B. in „Direct
Sequence”-Codemultiplexverfahren (DS-CDMA), im MIMO-Bereich, im Global
System for Mobile Communications (GSM) und beim Beamforming.The aim of this thesis is to investigate key issues encountered in the
design of transmission schemes and receiving techniques for Ultra Wideband
(UWB) communication systems. Based on different data rate applications,
this work is divided into two parts, where energy efficient and robust
physical layer solutions are proposed, respectively.
Due to a huge bandwidth of UWB signals, a considerable amount of multipath
arrivals with various path gains is resolvable at the receiver. For low
data rate impulse radio UWB systems, suboptimal non-coherent detection is a
simple way to effectively capture the multipath energy. Feasible techniques
that increase the power efficiency and the interference robustness of
non-coherent detection need to be investigated. For high data rate direct
sequence UWB systems, a large number of multipath arrivals results in
severe inter-/intra-symbol interference. Additionally, the system
performance may also be deteriorated by multi-user interference and
narrowband interference. It is necessary to develop advanced signal
processing techniques at the receiver to suppress these interferences.
Part I of this thesis deals with the co-design of signaling schemes and
receiver architectures in low data rate impulse radio UWB systems based on
non-coherent detection.● We analyze the bit error rate performance of
non-coherent detection and characterize a non-coherent combining loss,
i.e., a performance penalty with respect to coherent detection with maximum
ratio multipath combining. The thorough analysis of this loss is very
helpful for the design of transmission schemes and receive techniques
innon-coherent UWB communication systems.● We propose to use optical
orthogonal codes in a time hopping impulse radio UWB system based on an
analog non-coherent receiver. The “analog” means that the major part of
the multipath combining is implemented by an integrate and dump filter. The
introduced semi-analytical method can help us to easily select the time
hopping codes to ensure the robustness against the multi-user interference
and meanwhile to alleviate the non-coherent combining loss.● The main
contribution of Part I is the proposal of applying fully digital solutions
in non-coherent detection. The proposed digital non-coherent receiver is
based on a time domain analog-to-digital converter, which has a high speed
but a very low resolution to maintain a reasonable power consumption.
Compared to its analog counterpart, itnot only significantly reduces the
non-coherent combining loss but also offers a higher interference
robustness. In particular, the one-bit receiver can effectively suppress
strong multi-user interference and is thus advantageous in separating
simultaneously operating piconets.The fully digital solutions overcome the
difficulty of implementing long analog delay lines and make differential
UWB detection possible. They also facilitate the development of various
digital signal processing techniques such as multi-user detection and
non-coherent multipath combining methods as well as the use of advanced
modulationschemes (e.g., M-ary Walsh modulation).● Furthermore, we
present a novel impulse radio UWB system based on frequency hopping, where
both coherent and non-coherent receivers can be adopted. The key advantage
is that the baseband bandwidth can be considerably reduced (e.g., lower
than 500 MHz), which enables low-complexity implementation of the fully
digital solutions. It opens up various research activities in the
application field of wireless sensor networks.
Part II of this thesis proposes adaptive widely linear reduced-rank
techniques to suppress interferences for high data rate direct sequence UWB
systems, where second-order non-circular signals are used. The reduced-rank
techniques are designed to improve the convergence performance and the
interference robustness especially when the received vector contains a
large number of samples (due to a high sampling rate in UWB systems). The
widely linear processing takes full advantage of the second-order
statistics of the non-circular signals and enhances the estimation
performance. The generic widely linear reduced-rank concept also has a
great potential in the applications of other systems such as Direct
Sequence Code Division Multiple Access (DS-CDMA), Multiple Input Multiple
Output (MIMO) system, and Global System for Mobile Communications (GSM), or
in other areas such as beamforming
Performance Enhancement of DS-UWB Short Range Communication System Using Equalization Techniques
UWB is a major research area in the field of wireless communication. The IEEE 802.15.3a has been assigned the job of standardizing it. It is being considered as a breakthrough technology capable enough to revolutionize short range wireless communication. Ultra wideband communication as its name implies has large absolute bandwidth greater than 500 MHz and operating frequency band is 3.1 GHz- 10.6GHz. It is a rapidly growing technology that plays a very promising role in modern age wireless communication. It finds application in various sectors, for example in medical application to observe the status of patient using wireless health monitoring of life sustaining systems. In vehicular technology it can be used for obstacle avoidance and fast data transmission, and in military application as radar for detection behind walls and other blockages. Since it is based on short pulse carrier less transmission so hardware implementation becomes less complex and cheap. Thesis work has been done to study the BPSK modulation based DS-UWB communication system. Direct sequence spread spectrum (DSSS) technique along with UWB signal and two types of equalization techniques has been incorporated to mitigate the multipath fading effect associated with S-V indoor channel. Rake receiver has been used to utilize the energy of various delayed multipath components to improve the performance of the system. In short range communication process, indoor channel model or UWB channel model has been studied with different transmitter receiver separation, using some fundamental parameters of channel. Inter symbol interference (ISI) is a major problem in frequency selective fading channels, to overcome this problem, RAKE-MMSE equalizer and single carrier frequency domain equalizer (SC-FDE) have been incorporated. Thesis comprises of the system performance study and design done by using the above said equalization techniques for DS-UWB communications system
Accuracy evaluation of probabilistic location methods in UWB-RFID systems
The present project is focused on investigating the achievable accuracy of classical location methods commonly used in wireless and proposing an alternative location method based on combining two of them. The first part of the project studies the advantages and disadvantages of extending Ultra Wideband and Radiofrequency Identification technologies on some classical location methods. As a result of the study and with the goal of improving accuracy in indoor radio propagation channels, the Received Strength Signal-based location method and the Time Difference Of Arrival-based location method are selected to be combined in the alternative location method, including the proper channel models. This combined location method takes advantage of the virtues of each location method and combines information in order to improve the estimation of one target's position when locating in indoor channel. The second part of the project is devoted to analyse and simulate the modified RSS, TDOA and Combined location methods, considering the randomness of a real multipath fading channel. Results show that the Combined location method performs always the best accuracy. Specifically in analytical study, the combined location method provides a deterministic error of 24 cm which represents an improvement of 54% and 15% of the RSS and TDOA accuracies respectively. In the simulated study, results show that it is able to improve the accuracy up to 46% and 85% of the RSS and TDOA respectively in specific evaluated points
The Trade-off between Processing Gains of an Impulse Radio UWB System in the Presence of Timing Jitter
In time hopping impulse radio, pulses of duration are transmitted
for each information symbol. This gives rise to two types of processing gain:
(i) pulse combining gain, which is a factor , and (ii) pulse spreading
gain, which is , where is the mean interval between two
subsequent pulses. This paper investigates the trade-off between these two
types of processing gain in the presence of timing jitter. First, an additive
white Gaussian noise (AWGN) channel is considered and approximate closed form
expressions for bit error probability are derived for impulse radio systems
with and without pulse-based polarity randomization. Both symbol-synchronous
and chip-synchronous scenarios are considered. The effects of multiple-access
interference and timing jitter on the selection of optimal system parameters
are explained through theoretical analysis. Finally, a multipath scenario is
considered and the trade-off between processing gains of a synchronous impulse
radio system with pulse-based polarity randomization is analyzed. The effects
of the timing jitter, multiple-access interference and inter-frame interference
are investigated. Simulation studies support the theoretical results.Comment: To appear in the IEEE Transactions on Communication
- …