An Extended Virtual Aperture Imaging Model for Through-the-wall Sensing and Its Environmental Parameters Estimation

Through-the-wall imaging (TWI) radar has been given increasing attention in recent years. However, prior knowledge about environmental parameters, such as wall thickness and dielectric constant, and the standoff distance between an array and a wall, is generally unavailable in real applications. Thus, targets behind the wall suffer from defocusing and displacement under the conventional imag¬ing operations. To solve this problem, in this paper, we first set up an extended imaging model of a virtual aperture obtained by a multiple-input-multiple-output array, which considers the array position to the wall and thus is more applicable for real situations. Then, we present a method to estimate the environmental parameters to calibrate the TWI, without multiple measurements or dominant scatter¬ers behind-the-wall to assist. Simulation and field experi¬ments were performed to illustrate the validity of the pro¬posed imaging model and the environmental parameters estimation method

Through-wall detection and imaging of a vibrating target using synthetic aperture radar

This paper explains the development of a through-wall synthetic aperture radar (SAR) simulator, which is being used to investigate the SAR artefacts originating from vibrating targets, known as paired echoes. The simulation and experimental results both show that paired echoes can be detected and imaged through a wall, with a noticeable reduction in intensity, resulting in the number of visible echoes to be reduced in brightness and appear shifted in location in a through-wall SAR image

A Through-the-Wall Radar Imaging Method Based on a Realistic Model

An image focusing method based on a realistic model for a wall is proposed for through-the-wall radar imaging using a multiple-input multiple-output array. A technique to estimate the wall parameters (i.e., position, thickness, and permittivity) from the radar returns is developed and tested. The estimated wall properties are used in the developed penetrating image formation to form images. The penetrating image formation developed is computationally efficient to realize real-time imaging, which does not depend on refraction points. The through-the-wall imaging method is validated on simulated and real data. It is shown that the proposed method provides high localization accuracy of targets concealed behind walls

Spatial Spectrum-Based Imaging for UWB Through-the-Wall MIMO Arrays

To keep the system complexity at a reasonable level and conform to the propagation demands, MIMO arrays are usually sparse in through-the-wall applications, which results in corrupted and gapped data. The corresponding imaging results are seriously affected by the high-level sidelobes. To solve this problem, a new imaging model for ultra-wideband (UWB) MIMO arrays is constructed via spatial spectrum theory in this paper. Based on the model, the characteristics of the spatial spectrum for the MIMO array and its effects on imaging are discussed. To improve the imaging quality, a through-the-wall imaging enhancement method is proposed via spatial spectrum estimation. Synthetic and experimental results show that, unlike the conventional amplitude weighting methods and nonlinear techniques, the proposed method can efficiently suppress sidelobes in the imagery, especially for the sparse MIMO array, and consequently improve the target image quality without degrading the mainlobe resolution. The proposed method has been successfully used in our real through-the-wall radar system

Radar Imaging in Challenging Scenarios from Smart and Flexible Platforms

undefine

A Study of Adobe Wall Moisture Profiles and the Resulting Effects on Matched Illumination Waveforms in Through-The-Wall Radar Applications

In this dissertation, methods utilizing matched illumination theory to optimally design waveforms for enhanced target detection and identification in the context of through-the-wall radar (TWR) are explored. The accuracy of assumptions made in the waveform design process is evaluated through simulation. Additionally, the moisture profile of an adobe wall is investigated, and it is shown that the moisture profile of the wall will introduce significant variations in the matched illumination waveforms and subsequently, affect the resulting ability of the radar system to correctly identify and detect a target behind the wall. Experimental measurements of adobe wall moisture and corresponding dielectric properties confirms the need for accurate moisture profile information when designing radar waveforms which enhance signal-to-interference-plus-noise ratio (SINR) through use of matched illumination waveforms on the wall/target scenario. Furthermore, an evaluation of the ability to produce an optimal, matched illumination waveform for transmission using simple, common radar systems is undertaken and radar performance is evaluated

Behind-wall target detection using micro-doppler effects

Abstract: During the last decade technology for seeing through walls and through dense vegetation has interested many researchers. This technology offers excellent opportunities for military and police applications, though applications are not limited to the military and police; they go beyond those applications to where detecting a target behind an obstacle is needed. To be able to disclose the location and velocity of obscured targets, scientists’ resort to electromagnetic wave propagation. Thus, through-the-wall radar (TWR) is technology used to propagate electromagnetic waves towards a target through a wall. Though TWR is a promising technology, it has been reported that TWR imaging (TWRI) poses a range of ambiguities in target characterisation and detection. These ambiguities are related to the thickness and electric properties of walls. It has been reported that the mechanical and electric properties of the wall defocus the target image rendered by the radar. The defocusing problem is the phenomenon of displacing the target away from its true location when the image is rendered. Thus, the operator of the TWR will have a wrong position, not the real position of the target. Defocusing is not the only problem observed while the signal is travelling through the wall. Target classification, wall modelling and others are areas that need investigation...D.Ing. (Electrical and Electronic Engineering