Archaeology via underwater robots : mapping and localization within Maltese cistern systems

This paper documents the application of several underwater robot mapping and localization techniques used during an archaeological expedition. The goal of this project was to explore and map ancient cisterns located on the islands of Malta and Gozo. The cisterns of interest acted as water storage systems for fortresses, private homes, and churches. They often consisted of several connected chambers, still containing water. A sonar-equipped Remotely Operated Vehicle (ROV) was deployed into these cisterns to obtain both video footage and sonar range measurements. Four different mapping and localization techniques were employed including 1) Sonar image mosaics using stationary sonar scans, and 2) Simultaneous Localization and Mapping (SLAM) while the vehicle was in motion, 3) SLAM using stationary sonar scans, and 4) Localization using previously created maps. Two dimensional maps of 6 different cisterns were successfully constructed. It is estimated that the cisterns were built as far back as 300 B.C.peer-reviewe

Damage detection and monitoring for tunnel inspection based on computer vision

The deterioration of the underground infrastructure of the major cities around the world, due to ageing, has become a topic of great concern among engineers. Visual inspection, as part of the routine maintenance procedures, is a common practice used in the condition assessment of infrastructure to ensure its safety and serviceability. This practice, however, is labour-intensive, costly and inaccurate and, therefore, a new system based on computer vision technology is presented in this thesis, aiming to tackle these inadequacies. This thesis proposes a novel mosaicing system for inspection reporting, which can create an almost distortion-free mosaic of tunnels, thus allowing a large area of tunnels to be visualised. The system relies on Structure from Motion (SFM), which enables the system to cope with images with a general camera motion, in contrast to standard mosaicing software that can cope only with a strict camera motion. The system involves the automatic robust estimation of a 3D cylindrical surface using a Support Vector Machine to classify 3D points to improve the accuracy of the estimation. It is shown that some curvatures are observed in the mosaics when an inaccurate surface is used for mosaicing, while the mosaics from a surface estimated using the proposed method are almost distortion-free. New feature matching algorithms aiming to improve the performance of SFM systems are proposed. These algorithms apply a spatial consistency constraint to match features with a similar topography, in contrast to other matching algorithms that rely on matching based on the similar appearance of local image patches. The Shape Context and Random Forest algorithms are combined in the proposed algorithm, revealing promising results. The final contribution is a new change detection system for monitoring cracks in multi-temporal images. The system can cope with images with a general camera motion achieved by geometrical registration using SFM, unlike other systems that assume fixed or controlled cameras. The system performs photometric normalisation to cope with illumination variation in the images, and also a motion-invariant change detection algorithm is applied to handle deformable objects. It is shown that the results from the proposed change detection system are still impractical for use with tunnel images from a real environment, and further study is required

A review on computer vision based defect detection and condition assessment of concrete and asphalt civil infrastructure

To ensure the safety and the serviceability of civil infrastructure it is essential to visually inspect and assess its physical and functional condition. This review paper presents the current state of practice of assessing the visual condition of vertical and horizontal civil infrastructure; in particular of reinforced concrete bridges, precast concrete tunnels, underground concrete pipes, and asphalt pavements. Since the rate of creation and deployment of computer vision methods for civil engineering applications has been exponentially increasing, the main part of the paper presents a comprehensive synthesis of the state of the art in computer vision based defect detection and condition assessment related to concrete and asphalt civil infrastructure. Finally, the current achievements and limitations of existing methods as well as open research challenges are outlined to assist both the civil engineering and the computer science research community in setting an agenda for future research

Video anatomy : spatial-temporal video profile

Indiana University-Purdue University Indianapolis (IUPUI)A massive amount of videos are uploaded on video websites, smooth video browsing, editing, retrieval, and summarization are demanded. Most of the videos employ several types of camera operations for expanding field of view, emphasizing events, and expressing cinematic effect. To digest heterogeneous videos in video websites and databases, video clips are profiled to 2D image scroll containing both spatial and temporal information for video preview. The video profile is visually continuous, compact, scalable, and indexing to each frame. This work analyzes the camera kinematics including zoom, translation, and rotation, and categorize camera actions as their combinations. An automatic video summarization framework is proposed and developed. After conventional video clip segmentation and video segmentation for smooth camera operations, the global flow field under all camera actions has been investigated for profiling various types of video. A new algorithm has been designed to extract the major flow direction and convergence factor using condensed images. Then this work proposes a uniform scheme to segment video clips and sections, sample video volume across the major flow, compute flow convergence factor, in order to obtain an intrinsic scene space less influenced by the camera ego-motion. The motion blur technique has also been used to render dynamic targets in the profile. The resulting profile of video can be displayed in a video track to guide the access to video frames, help video editing, and facilitate the applications such as surveillance, visual archiving of environment, video retrieval, and online video preview

Quantifying the Influence of Surface Texture and Shape on Structure from Motion 3D Reconstructions

In general, optical methods for geometrical measurements are influenced by the surface properties of the examined object. In Structure from Motion (SfM), local variations in surface color or topography are necessary for detecting feature points for point-cloud triangulation. Thus, the level of contrast or texture is important for an accurate reconstruction. However, quantitative studies of the influence of surface texture on geometrical reconstruction are largely missing. This study tries to remedy that by investigating the influence of object texture levels on reconstruction accuracy using a set of reference artifacts. The artifacts are designed with well-defined surface geometries, and quantitative metrics are introduced to evaluate the lateral resolution, vertical geometric variation, and spatial–frequency information of the reconstructions. The influence of texture level is compared to variations in capturing range. For the SfM measurements, the ContextCapture software solution and a 50 Mpx DSLR camera are used. The findings are compared to results using calibrated optical microscopes. The results show that the proposed pipeline can be used for investigating the influence of texture on SfM reconstructions. The introduced metrics allow for a quantitative comparison of the reconstructions at varying texture levels and ranges. Both range and texture level are seen to affect the reconstructed geometries although in different ways. While an increase in range at a fixed focal length reduces the spatial resolution, an insufficient texture level causes an increased noise level and may introduce errors in the reconstruction. The artifacts are designed to be easily replicable, and by providing a step-by-step procedure of our testing and comparison methodology, we hope that other researchers will make use of the proposed testing pipeline

Development of Mining Sector Applications for Emerging Remote Sensing and Deep Learning Technologies

This thesis uses neural networks and deep learning to address practical, real-world problems in the mining sector. The main focus is on developing novel applications in the area of object detection from remotely sensed data. This area has many potential mining applications and is an important part of moving towards data driven strategic decision making across the mining sector. The scientific contributions of this research are twofold; firstly, each of the three case studies demonstrate new applications which couple remote sensing and neural network based technologies for improved data driven decision making. Secondly, the thesis presents a framework to guide implementation of these technologies in the mining sector, providing a guide for researchers and professionals undertaking further studies of this type. The first case study builds a fully connected neural network method to locate supporting rock bolts from 3D laser scan data. This method combines input features from the remote sensing and mobile robotics research communities, generating accuracy scores up to 22% higher than those found using either feature set in isolation. The neural network approach also is compared to the widely used random forest classifier and is shown to outperform this classifier on the test datasets. Additionally, the algorithms’ performance is enhanced by adding a confusion class to the training data and by grouping the output predictions using density based spatial clustering. The method is tested on two datasets, gathered using different laser scanners, in different types of underground mines which have different rock bolting patterns. In both cases the method is found to be highly capable of detecting the rock bolts with recall scores of 0.87-0.96. The second case study investigates modern deep learning for LiDAR data. Here, multiple transfer learning strategies and LiDAR data representations are examined for the task of identifying historic mining remains. A transfer learning approach based on a Lunar crater detection model is used, due to the task similarities between both the underlying data structures and the geometries of the objects to be detected. The relationship between dataset resolution and detection accuracy is also examined, with the results showing that the approach is capable of detecting pits and shafts to a high degree of accuracy with precision and recall scores between 0.80-0.92, provided the input data is of sufficient quality and resolution. Alongside resolution, different LiDAR data representations are explored, showing that the precision-recall balance varies depending on the input LiDAR data representation. The third case study creates a deep convolutional neural network model to detect artisanal scale mining from multispectral satellite data. This model is trained from initialisation without transfer learning and demonstrates that accurate multispectral models can be built from a smaller training dataset when appropriate design and data augmentation strategies are adopted. Alongside the deep learning model, novel mosaicing algorithms are developed both to improve cloud cover penetration and to decrease noise in the final prediction maps. When applied to the study area, the results from this model provide valuable information about the expansion, migration and forest encroachment of artisanal scale mining in southwestern Ghana over the last four years. Finally, this thesis presents an implementation framework for these neural network based object detection models, to generalise the findings from this research to new mining sector deep learning tasks. This framework can be used to identify applications which would benefit from neural network approaches; to build the models; and to apply these algorithms in a real world environment. The case study chapters confirm that the neural network models are capable of interpreting remotely sensed data to a high degree of accuracy on real world mining problems, while the framework guides the development of new models to solve a wide range of related challenges

Electronic Image Stabilization for Mobile Robotic Vision Systems

When a camera is affixed on a dynamic mobile robot, image stabilization is the first step towards more complex analysis on the video feed. This thesis presents a novel electronic image stabilization (EIS) algorithm for small inexpensive highly dynamic mobile robotic platforms with onboard camera systems. The algorithm combines optical flow motion parameter estimation with angular rate data provided by a strapdown inertial measurement unit (IMU). A discrete Kalman filter in feedforward configuration is used for optimal fusion of the two data sources. Performance evaluations are conducted by a simulated video truth model (capturing the effects of image translation, rotation, blurring, and moving objects), and live test data. Live data was collected from a camera and IMU affixed to the DAGSI Whegs™ mobile robotic platform as it navigated through a hallway. Template matching, feature detection, optical flow, and inertial measurement techniques are compared and analyzed to determine the most suitable algorithm for this specific type of image stabilization. Pyramidal Lucas-Kanade optical flow using Shi-Tomasi good features in combination with inertial measurement is the EIS algorithm found to be superior. In the presence of moving objects, fusion of inertial measurement reduces optical flow root-mean-squared (RMS) error in motion parameter estimates by 40%. No previous image stabilization algorithm to date directly fuses optical flow estimation with inertial measurement by way of Kalman filtering