32,780 research outputs found
A Survey of Positioning Systems Using Visible LED Lights
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe
An Implementation Approach and Performance Analysis of Image Sensor Based Multilateral Indoor Localization and Navigation System
Optical camera communication (OCC) exhibits considerable importance nowadays
in various indoor camera based services such as smart home and robot-based
automation. An android smart phone camera that is mounted on a mobile robot
(MR) offers a uniform communication distance when the camera remains at the
same level that can reduce the communication error rate. Indoor mobile robot
navigation (MRN) is considered to be a promising OCC application in which the
white light emitting diodes (LEDs) and an MR camera are used as transmitters
and receiver respectively. Positioning is a key issue in MRN systems in terms
of accuracy, data rate, and distance. We propose an indoor navigation and
positioning combined algorithm and further evaluate its performance. An android
application is developed to support data acquisition from multiple simultaneous
transmitter links. Experimentally, we received data from four links which are
required to ensure a higher positioning accuracy
Optical boundaries for LED-based indoor positioning system
Overlap of footprints of light emitting diodes (LEDs) increases the positioning accuracy of wearable LED indoor positioning systems (IPS) but such an approach assumes that the footprint boundaries are defined. In this work, we develop a mathematical model for defining the footprint boundaries of an LED in terms of a threshold angle instead of the conventional half or full angle. To show the effect of the threshold angle, we compare how overlaps and receiver tilts affect the performance of an LED-based IPS when the optical boundary is defined at the threshold angle and at the full angle. Using experimental measurements, simulations, and theoretical analysis, the effect of the defined threshold angle is estimated. The results show that the positional time when using the newly defined threshold angle is 12 times shorter than the time when the full angle is used. When the effect of tilt is considered, the threshold angle time is 22 times shorter than the full angle positioning time. Regarding accuracy, it is shown in this work that a positioning error as low as 230 mm can be obtained. Consequently, while the IPS gives a very low positioning error, a defined threshold angle reduces delays in an overlap-based LED IPS
A New Vehicle Localization Scheme Based on Combined Optical Camera Communication and Photogrammetry
The demand for autonomous vehicles is increasing gradually owing to their
enormous potential benefits. However, several challenges, such as vehicle
localization, are involved in the development of autonomous vehicles. A simple
and secure algorithm for vehicle positioning is proposed herein without
massively modifying the existing transportation infrastructure. For vehicle
localization, vehicles on the road are classified into two categories: host
vehicles (HVs) are the ones used to estimate other vehicles' positions and
forwarding vehicles (FVs) are the ones that move in front of the HVs. The FV
transmits modulated data from the tail (or back) light, and the camera of the
HV receives that signal using optical camera communication (OCC). In addition,
the streetlight (SL) data are considered to ensure the position accuracy of the
HV. Determining the HV position minimizes the relative position variation
between the HV and FV. Using photogrammetry, the distance between FV or SL and
the camera of the HV is calculated by measuring the occupied image area on the
image sensor. Comparing the change in distance between HV and SLs with the
change in distance between HV and FV, the positions of FVs are determined. The
performance of the proposed technique is analyzed, and the results indicate a
significant improvement in performance. The experimental distance measurement
validated the feasibility of the proposed scheme
MScMS-II: an innovative IR-based indoor coordinate measuring system for large-scale metrology applications
According to the current great interest concerning large-scale metrology applications in many different fields of manufacturing industry, technologies and techniques for dimensional measurement have recently shown a substantial improvement. Ease-of-use, logistic and economic issues, as well as metrological performance are assuming a more and more important role among system requirements. This paper describes the architecture and the working principles of a novel infrared (IR) optical-based system, designed to perform low-cost and easy indoor coordinate measurements of large-size objects. The system consists of a distributed network-based layout, whose modularity allows fitting differently sized and shaped working volumes by adequately increasing the number of sensing units. Differently from existing spatially distributed metrological instruments, the remote sensor devices are intended to provide embedded data elaboration capabilities, in order to share the overall computational load. The overall system functionalities, including distributed layout configuration, network self-calibration, 3D point localization, and measurement data elaboration, are discussed. A preliminary metrological characterization of system performance, based on experimental testing, is also presente
- …