Estimation of Impedance About the

In performing manual tasks, muscles are voluntarily contracted in order to produce force and orient the limb in the desired direction. Many occupational tasks are associated with frequent musculoskeletal disorders. In tasks involving skilful manipulation, very frequently the forces are focused on the upper limb and neck. Upper extremity cumulative trauma disorders are among the more common worker related injuries. These muscle disorders may be related to repetitive exertions, excessive muscle loads and extreme postures. One of the major challenges is to quantify the muscle load and researchers have tried various measures to quantify muscle load. Joint mechanical impedance can be a robust method to quantify muscle load. Joint mechanical impedance characterizes the dynamic torque-angle relationship of the joint. Joint impedance has been measured by earlier researchers, for limited tasks, by imparting force (or angle) perturbations on the joint and relating resultant angular (or force) changes. The joint impedance gives a quantitative measure related to muscle co-contraction level. Measurement of the mechanical impedance at the workplace may provide useful information relevant to the understanding of upper limb disorders. Electromyogram (EMG) is the electrical activity of the muscle. Usually, an estimate of the EMG amplitude is obtained from the raw waveform recorded from the surface of the skin. EMG amplitude estimates can be used to non-invasively estimate torque about joints. Presently, there exists no means by which mechanical impedance can be estimated non-invasively (i.e., without external perturbations). Therefore, we proposed the use of EMG to noninvasively estimate the joint mechanical impedance. Our objective in this project was to determine the extent to which surface EMG can be used to estimate mechanical impedance. Simulation studies were first performed to understand the extent to which this tool could be useful and to determine methods to be used for the experiment. The simulations were followed by evaluating and estimating mechanical impedance using data collected from one experimental subject. Simulations helped to devise processing techniques for the measured signals and also to determine the length of data to be collected. Low pass filters for derivatives (used in the development of impedance estimates) were designed. Subtracting out a polynomial was the best approach to attenuate a low frequency drift (artifact) that occurs in torque measurements. Thirty seconds of data provided impedance estimates with a relative error of 5% when EMG amplitude estimates with SNR of 15 were used. Experimental data from constant-posture, slowly force-varying background torque level showed that the elbow joint system behaved like a second order linear system between 2 Hz and 10 Hz. Co-contraction by subjects during experiments caused impedance estimates to be unexpectedly high even at low background torque. Further experiments would need to be conducted with the subjects being instructed to avoid co-contraction

On the Sample Complexity of the Linear Quadratic Regulator

This paper addresses the optimal control problem known as the linear quadratic regulator in the case when the dynamics are unknown. We propose a multistage procedure, called Coarse-ID control, that estimates a model from a few experimental trials, estimates the error in that model with respect to the truth, and then designs a controller using both the model and uncertainty estimate. Our technique uses contemporary tools from random matrix theory to bound the error in the estimation procedure. We also employ a recently developed approach to control synthesis called System Level Synthesis that enables robust control design by solving a quasi-convex optimization problem. We provide end-to-end bounds on the relative error in control cost that are optimal in the number of parameters and that highlight salient properties of the system to be controlled such as closed-loop sensitivity and optimal control magnitude. We show experimentally that the Coarse-ID approach enables efficient computation of a stabilizing controller in regimes where simple control schemes that do not take the model uncertainty into account fail to stabilize the true system

Control theoretic models of pointing

This article presents an empirical comparison of four models from manual control theory on their ability to model targeting behaviour by human users using a mouse: McRuer’s Crossover, Costello’s Surge, second-order lag (2OL), and the Bang-bang model. Such dynamic models are generative, estimating not only movement time, but also pointer position, velocity, and acceleration on a moment-to-moment basis. We describe an experimental framework for acquiring pointing actions and automatically fitting the parameters of mathematical models to the empirical data. We present the use of time-series, phase space, and Hooke plot visualisations of the experimental data, to gain insight into human pointing dynamics. We find that the identified control models can generate a range of dynamic behaviours that captures aspects of human pointing behaviour to varying degrees. Conditions with a low index of difficulty (ID) showed poorer fit because their unconstrained nature leads naturally to more behavioural variability. We report on characteristics of human surge behaviour (the initial, ballistic sub-movement) in pointing, as well as differences in a number of controller performance measures, including overshoot, settling time, peak time, and rise time. We describe trade-offs among the models. We conclude that control theory offers a promising complement to Fitts’ law based approaches in HCI, with models providing representations and predictions of human pointing dynamics, which can improve our understanding of pointing and inform design

Use of collateral information to improve LANDSAT classification accuracies

There are no author-identified significant results in this report

On Practical machine Learning and Data Analysis

This thesis discusses and addresses some of the difficulties associated with practical machine learning and data analysis. Introducing data driven methods in e.g industrial and business applications can lead to large gains in productivity and efficiency, but the cost and complexity are often overwhelming. Creating machine learning applications in practise often involves a large amount of manual labour, which often needs to be performed by an experienced analyst without significant experience with the application area. We will here discuss some of the hurdles faced in a typical analysis project and suggest measures and methods to simplify the process. One of the most important issues when applying machine learning methods to complex data, such as e.g. industrial applications, is that the processes generating the data are modelled in an appropriate way. Relevant aspects have to be formalised and represented in a way that allow us to perform our calculations in an efficient manner. We present a statistical modelling framework, Hierarchical Graph Mixtures, based on a combination of graphical models and mixture models. It allows us to create consistent, expressive statistical models that simplify the modelling of complex systems. Using a Bayesian approach, we allow for encoding of prior knowledge and make the models applicable in situations when relatively little data are available. Detecting structures in data, such as clusters and dependency structure, is very important both for understanding an application area and for specifying the structure of e.g. a hierarchical graph mixture. We will discuss how this structure can be extracted for sequential data. By using the inherent dependency structure of sequential data we construct an information theoretical measure of correlation that does not suffer from the problems most common correlation measures have with this type of data. In many diagnosis situations it is desirable to perform a classification in an iterative and interactive manner. The matter is often complicated by very limited amounts of knowledge and examples when a new system to be diagnosed is initially brought into use. We describe how to create an incremental classification system based on a statistical model that is trained from empirical data, and show how the limited available background information can still be used initially for a functioning diagnosis system. To minimise the effort with which results are achieved within data analysis projects, we need to address not only the models used, but also the methodology and applications that can help simplify the process. We present a methodology for data preparation and a software library intended for rapid analysis, prototyping, and deployment. Finally, we will study a few example applications, presenting tasks within classification, prediction and anomaly detection. The examples include demand prediction for supply chain management, approximating complex simulators for increased speed in parameter optimisation, and fraud detection and classification within a media-on-demand system

On-the-fly synthesizer programming with rule learning

This manuscript explores automatic programming of sound synthesis algorithms within the context of the performative artistic practice known as live coding. Writing source code in an improvised way to create music or visuals became an instrument the moment affordable computers were able to perform real-time sound synthesis with languages that keep their interpreter running. Ever since, live coding has dealt with real time programming of synthesis algorithms. For that purpose, one possibility is an algorithm that automatically creates variations out of a few presets selected by the user. However, the need for real-time feedback and the small size of the data sets (which can even be collected mid-performance) are constraints that make existing automatic sound synthesizer programmers and learning algorithms unfeasible. Also, the design of such algorithms is not oriented to create variations of a sound but rather to find the synthesizer parameters that match a given one. Other approaches create representations of the space of possible sounds, allowing the user to explore it by means of interactive evolution. Even though these systems are exploratory-oriented, they require longer run-times. This thesis investigates inductive rule learning for on-the-fly synthesizer programming. This approach is conceptually different from those found in both synthesizer programming and live coding literature. Rule models offer interpretability and allow working with the parameter values of the synthesis algorithms (even with symbolic data), making preprocessing unnecessary. RuLer, the proposed learning algorithm, receives a dataset containing user labeled combinations of parameter values of a synthesis algorithm. Among those combinations sharing the same label, it analyses the patterns based on dissimilarity. These patterns are described as an IF-THEN rule model. The algorithm parameters provide control to define what is considered a pattern. As patterns are the base for inducting new parameter settings, the algorithm parameters control the degree of consistency of the inducted settings respect to the original input data. An algorithm (named FuzzyRuLer) able to extend IF-THEN rules to hyperrectangles, which in turn are used as the cores of membership functions, is presented. The resulting fuzzy rule model creates a map of the entire input feature space. For such a pursuit, the algorithm generalizes the logical rules solving the contradictions by following a maximum volume heuristics. Across the manuscript it is discussed how, when machine learning algorithms are used as creative tools, glitches, errors or inaccuracies produced by the resulting models are sometimes desirable as they might offer novel, unpredictable results. The evaluation of the algorithms follows two paths. The first focuses on user tests. The second responds to the fact that this work was carried out within the computer science department and is intended to provide a broader, nonspecific domain evaluation of the algorithms performance using extrinsic benchmarks (i.e not belonging to a synthesizer's domain) for cross validation and minority oversampling. In oversampling tasks, using imbalanced datasets, the algorithm yields state-of-the-art results. Moreover, the synthetic points produced are significantly different from those created by the other algorithms and perform (controlled) exploration of more distant regions. Finally, accompanying the research, various performances, concerts and an album were produced with the algorithms and examples of this thesis. The reviews received and collections where the album has been featured show a positive reception within the community. Together, these evaluations suggest that rule learning is both an effective method and a promising path for further research.Aquest manuscrit explora la programació automàtica d’algorismes de síntesi de so dins del context de la pràctica artística performativa coneguda com a live coding. L'escriptura improvisada de codi font per crear música o visuals es va convertir en un instrument en el moment en què els ordinadors van poder realitzar síntesis de so en temps real amb llenguatges que mantenien el seu intèrpret en funcionament. D'aleshores ençà, el live coding comporta la programació en temps real d’algorismes de síntesi de so. Per a aquest propòsit, una possibilitat és tenir un algorisme que creï automàticament variacions a partir d'alguns presets seleccionats. No obstant, la necessitat de retroalimentació en temps real i la petita mida dels conjunts de dades són restriccions que fan que els programadors automàtics de sintetitzadors de so i els algorismes d’aprenentatge no siguin factibles d’utilitzar. A més, el seu disseny no està orientat a crear variacions d'un so, sinó a trobar els paràmetres del sintetitzador que aplicats a l'algorisme de síntesi produeixen un so determinat (target). Altres enfocaments creen representacions de l'espai de sons possibles, per permetre a l'usuari explorar-lo mitjançant l'evolució interactiva, però requereixen temps més llargs. Aquesta tesi investiga l'aprenentatge inductiu de regles per a la programació on-the-fly de sintetitzadors. Aquest enfocament és conceptualment diferent dels que es troben a la literatura. Els models de regles ofereixen interpretabilitat i permeten treballar amb els valors dels paràmetres dels algorismes de síntesi, sense processament previ. RuLer, l'algorisme d'aprenentatge proposat, rep dades amb combinacions etiquetades per l'usuari dels valors dels paràmetres d'un algorisme de síntesi. A continuació, analitza els patrons, basats en la dissimilitud, entre les combinacions de cada etiqueta. Aquests patrons es descriuen com un model de regles IF-THEN. Els paràmetres de l'algorisme proporcionen control per definir el que es considera un patró. Llavors, controlen el grau de consistència dels nous paràmetres de síntesi induïts respecte a les dades d'entrada originals. A continuació, es presenta un algorisme (FuzzyRuLer) capaç d’estendre les regles IF-THEN a hiperrectangles, que al seu torn s’utilitzen com a nuclis de funcions de pertinença. El model de regles difuses resultant crea un mapa complet de l'espai de la funció d'entrada. Per això, l'algorisme generalitza les regles lògiques seguint una heurística de volum màxim. Al llarg del manuscrit es discuteix com, quan s’utilitzen algorismes d’aprenentatge automàtic com a eines creatives, de vegades són desitjables glitches, errors o imprecisions produïdes pels models resultants, ja que poden oferir nous resultats imprevisibles. L'avaluació dels algorismes segueix dos camins. El primer es centra en proves d'usuari. El segon, que respon al fet que aquest treball es va dur a terme dins del departament de ciències de la computació, pretén proporcionar una avaluació més àmplia, no específica d'un domini, del rendiment dels algorismes mitjançant benchmarks extrínsecs utilitzats per cross-validation i minority oversampling. En tasques d'oversampling, mitjançant imbalanced data sets, l'algorisme proporciona resultats equiparables als de l'estat de l'art. A més, els punts sintètics produïts són significativament diferents als creats pels altres algorismes i realitzen exploracions (controlades) de regions més llunyanesEste manuscrito explora la programación automática de algoritmos de síntesis de sonido dentro del contexto de la práctica artística performativa conocida como live coding. La escritura de código fuente de forma improvisada para crear música o imágenes, se convirtió en un instrumento en el momento en que las computadoras asequibles pudieron realizar síntesis de sonido en tiempo real con lenguajes que mantuvieron su interprete en funcionamiento. Desde entonces, el live coding ha implicado la programación en tiempo real de algoritmos de síntesis. Para ese propósito, una posibilidad es tener un algoritmo que cree automáticamente variaciones a partir de unos pocos presets seleccionados. Sin embargo, la necesidad de retroalimentación en tiempo real y el pequeño tamaño de los conjuntos de datos (que incluso pueden recopilarse durante la misma actuación), limitan el uso de los algoritmos existentes, tanto de programación automática de sintetizadores como de aprendizaje de máquina. Además, el diseño de dichos algoritmos no está orientado a crear variaciones de un sonido, sino a encontrar los parámetros del sintetizador que coincidan con un sonido dado. Otros enfoques crean representaciones del espacio de posibles sonidos, para permitir al usuario explorarlo mediante evolución interactiva. Aunque estos sistemas están orientados a la exploración, requieren tiempos más largos. Esta tesis investiga el aprendizaje inductivo de reglas para la programación de sintetizadores on-the-fly. Este enfoque es conceptualmente diferente de los que se encuentran en la literatura, tanto de programación de sintetizadores como de live coding. Los modelos de reglas ofrecen interpretabilidad y permiten trabajar con los valores de los parámetros de los algoritmos de síntesis (incluso con datos simbólicos), haciendo innecesario el preprocesamiento. RuLer, el algoritmo de aprendizaje propuesto, recibe un conjunto de datos que contiene combinaciones, etiquetadas por el usuario, de valores de parámetros de un algoritmo de síntesis. Luego, analiza los patrones, en función de la disimilitud, entre las combinaciones de cada etiqueta. Estos patrones se describen como un modelo de reglas lógicas IF-THEN. Los parámetros del algoritmo proporcionan el control para definir qué se considera un patrón. Como los patrones son la base para inducir nuevas configuraciones de parámetros, los parámetros del algoritmo controlan también el grado de consistencia de las configuraciones inducidas con respecto a los datos de entrada originales. Luego, se presenta un algoritmo (llamado FuzzyRuLer) capaz de extender las reglas lógicas tipo IF-THEN a hiperrectángulos, que a su vez se utilizan como núcleos de funciones de pertenencia. El modelo de reglas difusas resultante crea un mapa completo del espacio de las clases de entrada. Para tal fin, el algoritmo generaliza las reglas lógicas resolviendo las contradicciones utilizando una heurística de máximo volumen. A lo largo del manuscrito se analiza cómo, cuando los algoritmos de aprendizaje automático se utilizan como herramientas creativas, los glitches, errores o inexactitudes producidas por los modelos resultantes son a veces deseables, ya que pueden ofrecer resultados novedosos e impredecibles. La evaluación de los algoritmos sigue dos caminos. El primero se centra en pruebas de usuario. El segundo, responde al hecho de que este trabajo se llevó a cabo dentro del departamento de ciencias de la computación y está destinado a proporcionar una evaluación más amplia, no de dominio específica, del rendimiento de los algoritmos utilizando beanchmarks extrínsecos para cross-validation y oversampling. En estas últimas pruebas, utilizando conjuntos de datos no balanceados, el algoritmo produce resultados equiparables a los del estado del arte. Además, los puntos sintéticos producidos son significativamente diferentes de los creados por los otros algoritmos y realizan una exploración (controlada) de regiones más distantes. Finalmente, acompañando la investigación, realicé diversas presentaciones, conciertos y un ´álbum utilizando los algoritmos y ejemplos de esta tesis. Las críticas recibidas y las listas donde se ha presentado el álbum muestran una recepción positiva de la comunidad. En conjunto, estas evaluaciones sugieren que el aprendizaje de reglas es al mismo tiempo un método eficaz y un camino prometedor para futuras investigaciones.Postprint (published version

Advances in Intelligent Robotics and Collaborative Automation

This book provides an overview of a series of advanced research lines in robotics as well as of design and development methodologies for intelligent robots and their intelligent components. It represents a selection of extended versions of the best papers presented at the Seventh IEEE International Workshop on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications IDAACS 2013 that were related to these topics. Its contents integrate state of the art computational intelligence based techniques for automatic robot control to novel distributed sensing and data integration methodologies that can be applied to intelligent robotics and automation systems. The objective of the text was to provide an overview of some of the problems in the field of robotic systems and intelligent automation and the approaches and techniques that relevant research groups within this area are employing to try to solve them.The contributions of the different authors have been grouped into four main sections:• Robots• Control and Intelligence• Sensing• Collaborative automationThe chapters have been structured to provide an easy to follow introduction to the topics that are addressed, including the most relevant references, so that anyone interested in this field can get started in the area

34th Midwest Symposium on Circuits and Systems-Final Program

Organized by the Naval Postgraduate School Monterey California. Cosponsored by the IEEE Circuits and Systems Society. Symposium Organizing Committee: General Chairman-Sherif Michael, Technical Program-Roberto Cristi, Publications-Michael Soderstrand, Special Sessions- Charles W. Therrien, Publicity: Jeffrey Burl, Finance: Ralph Hippenstiel, and Local Arrangements: Barbara Cristi

Graph Signal Processing: Overview, Challenges and Applications

Research in Graph Signal Processing (GSP) aims to develop tools for processing data defined on irregular graph domains. In this paper we first provide an overview of core ideas in GSP and their connection to conventional digital signal processing. We then summarize recent developments in developing basic GSP tools, including methods for sampling, filtering or graph learning. Next, we review progress in several application areas using GSP, including processing and analysis of sensor network data, biological data, and applications to image processing and machine learning. We finish by providing a brief historical perspective to highlight how concepts recently developed in GSP build on top of prior research in other areas.Comment: To appear, Proceedings of the IEE