975 research outputs found

    IP forwarding alternatives in cell switched optical networks

    Get PDF
    Optical switching will enable core Internet packet switching to scale with future transmission rate increases. Currently proposed optical ATM switches do not allow packet reassembly, which is necessary for packet level forwarding. This results in the requirement to create end to end ATM virtual connections for flows even if they contain only one packet. In electronically switched networks MPOA and MPLS allow both cell and packet level forwarding to overcome this problem. This paper examines the feasibility of implementing such protocols over an optically switched network. Two different architectures are examined: use of an adjunct electrical router; and native optical packet reassembly. An examination of the optical reassembly buffer requirements show that the use of MPLS will require significantly more buffering than MPOA

    Traffic Engineering

    Get PDF

    Software Defined Networking:Applicability and Service Possibilities

    Get PDF

    Overview of UMTS network evolution through radio and transmission feature validation

    Get PDF
    This project is based on several UMTS network feature validation with the aim to provide an end-to-end in-depth knowledge overview gained in parallel in the areas of radio network mobility processes (cell camping and inter-system handover), Quality of Service improvement for HSPA data users and transport network evolution towards the All-IP era.Hardware and software validation is a key step in the relationship between the mobile network operator and the vendor. Through this verification process, while executing that functionality or testing a specific hardware, the difference between the actual result and expected result can be better understood and, in turn, this in-depth knowledge acquisition is translated into a tailored usage of the product in the operator’s live network. As a result, validation helps in building a better product as per the customer’s requirement and helps satisfying their needs, which positively impacts in the future evolution of the vendor product roadmap implementation process for a specific customer. This project is based on several Universal Mobile Telecommunication Services (UMTS) network feature validation with the aim to provide an end-to-end in-depth knowledge overview gained in parallel in the areas of radio network mobility processes (cell camping and inter-system handover), Quality of Service improvement for High Speed Downlink Packet Access (HSPA) data users and transport network evolution towards the All-IP era.Las campañas de validación hardware y software son un paso clave en las relaciones comerciales establecidas entre un operador de telecomunicaciones y su proveedor de equipos de red. Durante los procesos de certificación, mientras se ejecuta una funcionalidad software o se valida un determinado hardware, se obtiene un conocimiento profundo de la diferencia entre el resultado obtenido y el esperado, repercutiendo directamente en un uso a medida de dicha funcionalidad o hardware en la propia red del cliente. Como consecuencia de lo anterior, podemos aseverar que los procesos de validación permiten en gran medida al proveedor adaptarse mejor a los requerimientos del cliente, ayudando a satisfacer realmente sus necesidades. Esto implica directamente un impacto positivo en la futura evolución del portfolio que el fabricante ofrece a un determinado cliente. Este proyecto está basado en la validación de diferentes funcionalidades de red UMTS, cuyo objetivo es proporcionar un conocimiento global de distintos aspectos que conforman el funcionamiento de una red de telecomunicaciones 3G, como son los procesos de movilidad de acceso radio (acampado de red y handover inter-sistema), las mejoras en la calidad de servicio para usuarios de datos HSPA y la convergencia de la red de transporte hacia la era IP.Els processos de validació hardware i software són un punt clau en les relacions comercials establertes entre un operador de telecomunicaciones i el proveïdor d'equipament de la xarxa. En el transcurs dels processos de certificació, a la mateixa vegada que s'executa una funcionalitat software o es valida un determinat hardware, s'obtenen grans coneixements respecte la diferència entre el resultat obtingut i l'esperat, que són d'aplicació directa a l'hora d'establir un ús adpatat a la xarxa del client. En conseqüència, podem asseverar que les campanyes de validació permeten en gran mesura al proveïdor adaptar-se millor als requeriments del client, ajudant a satisfer realment les seves necessitats. Això implica directament un impacte positiu en la futura evol.lució del portfoli que el fabricant ofereix a un determinat client. Aquest projecte es basa en la presentació d'un procès de validació de diferents funcionalitats relacionades amb la xarxa UMTS, amb l'objectiu de proporcionar un coneixement global de la varietat d'aspectes que conformen el funcionament d'una xarxa de telecomunicacions 3G, com són els processos de mobilitat en accès radio (acampat de l'usuari i handover inter-sistema), millores en la qualitat de servei per a usuaris de dades HSPA i la convergència de la xarxa de transport cap a l'era IP

    Foutbestendige toekomstige internetarchitecturen

    Get PDF

    Will SDN be part of 5G?

    Get PDF
    For many, this is no longer a valid question and the case is considered settled with SDN/NFV (Software Defined Networking/Network Function Virtualization) providing the inevitable innovation enablers solving many outstanding management issues regarding 5G. However, given the monumental task of softwarization of radio access network (RAN) while 5G is just around the corner and some companies have started unveiling their 5G equipment already, the concern is very realistic that we may only see some point solutions involving SDN technology instead of a fully SDN-enabled RAN. This survey paper identifies all important obstacles in the way and looks at the state of the art of the relevant solutions. This survey is different from the previous surveys on SDN-based RAN as it focuses on the salient problems and discusses solutions proposed within and outside SDN literature. Our main focus is on fronthaul, backward compatibility, supposedly disruptive nature of SDN deployment, business cases and monetization of SDN related upgrades, latency of general purpose processors (GPP), and additional security vulnerabilities, softwarization brings along to the RAN. We have also provided a summary of the architectural developments in SDN-based RAN landscape as not all work can be covered under the focused issues. This paper provides a comprehensive survey on the state of the art of SDN-based RAN and clearly points out the gaps in the technology.Comment: 33 pages, 10 figure

    On the Merits of Deploying TDM-based Next-Generation PON Solutions in the Access Arena As Multiservice, All Packet-Based 4G Mobile Backhaul RAN Architecture

    Full text link
    The phenomenal growth of mobile backhaul capacity required to support the emerging fourth-generation (4G) traffic including mobile WiMAX, cellular Long-Term Evolution (LTE), and LTE-Advanced (LTE-A) requires rapid migration from today\u27s legacy circuit switched T1/E1 wireline and microwave backhaul technologies to a new fiber-supported, all-packet-based mobile backhaul infrastructure. Clearly, a cost effective fiber supported all-packet-based mobile backhaul radio access network (RAN) architecture that is compatible with these inherently distributed 4G RAN architectures is needed to efficiently scale current mobile backhaul networks. However, deploying a green fiber-based mobile backhaul infrastructure is a costly proposition mainly due to the significant cost associated with digging the trenches in which the fiber is to be laid. These, along with the inevitable trend towards all-IP/Ethernet transport protocols and packet switched networks, have prompted many carriers around the world to consider the potential of utilizing the existing fiber-based Passive Optical Network (PON) access infrastructure as an all-packet-based converged fixed-mobile optical access networking transport architecture to backhaul both mobile and typical wireline traffic. Passive Optical Network (PON)-based fiber-to-the-curb/home (FTTC/FTTH) access networks are being deployed around the globe based on two Time-Division Multiplexed (TDM) standards: ITU G.984 Gigabit PON (GPON) and IEEE 802.ah Ethernet PON (EPON). A PON connects a group of Optical Network Units (ONUs) located at the subscriber premises to an Optical Line Terminal (OLT) located at the service provider\u27s facility. It is the purpose of this thesis to examine the technological requirements and assess the performance analysis and feasibility for deploying TDM-based next-generation (NG) PON solutions in the access arena as multiservice, all packet-based 4G mobile backhaul RAN and/or converged fixed-mobile optical networking architecture. Specifically, this work proposes and devises a simple and cost-effective 10G-EPON-based 4G mobile backhaul RAN architecture that efficiently transports and supports a wide range of existing and emerging fixed-mobile advanced multimedia applications and services along with the diverse quality of service (QoS), rate, and reliability requirements set by these services. The techno-economics merits of utilizing PON-based 4G RAN architecture versus that of traditional 4G (mobile WiMAX and LTE) RAN will be thoroughly examine and quantified. To achieve our objective, we utilize the existing fiber-based PON access infrastructure with novel ring-based distribution access network and wireless-enabled OLT and ONUs as the multiservice packet-based 4G mobile backhaul RAN infrastructure. Specifically, to simplify the implementation of such a complex undertaking, this work is divided into two sequential phases. In the first phase, we examine and quantify the overall performance of the standalone ring-based 10G-EPON architecture (just the wireline part without overlaying/incorporating the wireless part (4G RAN)) via modeling and simulations. We then assemble the basic building blocks, components, and sub-systems required to build up a proof-of-concept prototype testbed for the standalone ring-based EPON architecture. The testbed will be used to verify and demonstrate the performance of the standalone architecture, specifically, in terms of power budget, scalability, and reach. In the second phase, we develop an integrated framework for the efficient interworking between the two wireline PON and 4G mobile access technologies, particularly, in terms of unified network control and management (NCM) operations. Specifically, we address the key technical challenges associated with tailoring a typically centralized PON-based access architecture to interwork with and support a distributed 4G RAN architecture and associated radio NCM operations. This is achieved via introducing and developing several salient-networking innovations that collectively enable the standalone EPON architecture to support a fully distributed 4G mobile backhaul RAN and/or a truly unified NG-PON-4G access networking architecture. These include a fully distributed control plane that enables intercommunication among the access nodes (ONUs/BSs) as well as signaling, scheduling algorithms, and handoff procedures that operate in a distributed manner. Overall, the proposed NG-PON architecture constitutes a complete networking paradigm shift from the typically centralized PON\u27s architecture and OLT-based NCM operations to a new disruptive fully distributed PON\u27s architecture and NCM operations in which all the typically centralized OLT-based PON\u27s NCM operations are migrated to and independently implemented by the access nodes (ONUs) in a distributed manner. This requires migrating most of the typically centralized wireline and radio control and user-plane functionalities such as dynamic bandwidth allocation (DBA), queue management and packet scheduling, handover control, radio resource management, admission control, etc., typically implemented in today\u27s OLT/RNC, to the access nodes (ONUs/4G BSs). It is shown that the overall performance of the proposed EPON-based 4G backhaul including both the RAN and Mobile Packet Core (MPC) {Evolved Packet Core (EPC) per 3GPP LTE\u27s standard} is significantly augmented compared to that of the typical 4G RAN, specifically, in terms of handoff capability, signaling overhead, overall network throughput and latency, and QoS support. Furthermore, the proposed architecture enables redistributing some of the intelligence and NCM operations currently centralized in the MPC platform out into the access nodes of the mobile RAN. Specifically, as this work will show, it enables offloading sizable fraction of the mobile signaling as well as actual local upstream traffic transport and processing (LTE bearers switch/set-up, retain, and tear-down and associated signaling commands from the BSs to the EPC and vice-versa) from the EPC to the access nodes (ONUs/BSs). This has a significant impact on the performance of the EPC. First, it frees up a sizable fraction of the badly needed network resources as well as processing on the overloaded centralized serving nodes (AGW) in the MPC. Second, it frees up capacity and sessions on the typically congested mobile backhaul from the BSs to the EPC and vice-versa
    corecore