Future Wireless Networking Experiments Escaping Simulations

In computer networking, simulations are widely used to test and analyse new protocols and ideas. Currently, there are a number of open real testbeds available to test the new protocols. In the EU, for example, there are Fed4Fire testbeds, while in the US, there are POWDER and COSMOS testbeds. Several other countries, including Japan, Brazil, India, and China, have also developed next-generation testbeds. Compared to simulations, these testbeds offer a more realistic way to test protocols and prototypes. In this paper, we examine some available wireless testbeds from the EU and the US, which are part of an open-call EU project under the NGIAtlantic H2020 initiative to conduct Software-Defined Networking (SDN) experiments on intelligent Internet of Things (IoT) networks. Furthermore, the paper presents benchmarking results and failure recovery results from each of the considered testbeds using a variety of wireless network topologies. The paper compares the testbeds based on throughput, latency, jitter, resources available, and failure recovery time, by sending different types of traffic. The results demonstrate the feasibility of performing wireless experiments on different testbeds in the US and the EU. Further, issues faced during experimentation on EU and US testbeds are also reported

Signals in the Soil: An Introduction to Wireless Underground Communications

In this chapter, wireless underground (UG) communications are introduced. A detailed overview of WUC is given. A comprehensive review of research challenges in WUC is presented. The evolution of underground wireless is also discussed. Moreover, different component of UG communications is wireless. The WUC system architecture is explained with a detailed discussion of the anatomy of an underground mote. The examples of UG wireless communication systems are explored. Furthermore, the differences of UG wireless and over-the-air wireless are debated. Different types of wireless underground channel (e.g., In-Soil, Soil-to-Air, and Air-to-Soil) are reported as well

Proxcache: A new cache deployment strategy in information-centric network for mitigating path and content redundancy

One of the promising paradigms for resource sharing with maintaining the basic Internet semantics is the Information-Centric Networking (ICN). ICN distinction with the current Internet is its ability to refer contents by names with partly dissociating the host-to-host practice of Internet Protocol addresses. Moreover, content caching in ICN is the major action of achieving content networking to reduce the amount of server access. The current caching practice in ICN using the Leave Copy Everywhere (LCE) progenerate problems of over deposition of contents known as content redundancy, path redundancy, lesser cache-hit rates in heterogeneous networks and lower content diversity. This study proposes a new cache deployment strategy referred to as ProXcache to acquire node relationships using hyperedge concept of hypergraph for cache positioning. The study formulates the relationships through the path and distance approximation to mitigate content and path redundancy. The study adopted the Design Research Methodology approach to achieve the slated research objectives. ProXcache was investigated using simulation on the Abilene, GEANT and the DTelekom network topologies for LCE and ProbCache caching strategies with the Zipf distribution to differ content categorization. The results show the overall content and path redundancy are minimized with lesser caching operation of six depositions per request as compared to nine and nineteen for ProbCache and LCE respectively. ProXcache yields better content diversity ratio of 80% against 20% and 49% for LCE and ProbCache respectively as the cache sizes varied. ProXcache also improves the cache-hit ratio through proxy positions. These thus, have significant influence in the development of the ICN for better management of contents towards subscribing to the Future Internet

DaI: Decrypt and Infer the Quality of Real-Time Video Streaming

Inferring the quality of network services is the vital basis of optimization for network operators. However, prevailing real-time video streaming applications adopt encryption for security, leaving it a problem to extract Quality of Service (QoS) indicators of real-time video. In this paper, we propose DaI, a traffic-based real-time video quality estimator. DaI can partially decrypt the encrypted real-time video data and applies machine learning methods to estimate key objective Quality of Experience (QoE) metrics of real-time video. According to the experimental results, DaI can estimate objective QoE metrics with an average accuracy of 79%

Enhancing the 3GPP V2X architecture with information-centric networking

Vehicle-to-everything (V2X) communications allow a vehicle to interact with other vehicles and with communication parties in its vicinity (e.g., road-side units, pedestrian users, etc.) with the primary goal of making the driving and traveling experience safer, smarter and more comfortable. A wide set of V2X-tailored specifications have been identified by the Third Generation Partnership Project (3GPP) with focus on the design of architecture enhancements and a flexible air interface to ensure ultra-low latency, highly reliable and high-throughput connectivity as the ultimate aim. This paper discusses the potential of leveraging Information-Centric Networking (ICN) principles in the 3GPP architecture for V2X communications. We consider Named Data Networking (NDN) as reference ICN architecture and elaborate on the specific design aspects, required changes and enhancements in the 3GPP V2X architecture to enable NDN-based data exchange as an alternative/complementary solution to traditional IP networking, which barely matches the dynamics of vehicular environments. Results are provided to showcase the performance improvements of the NDN-based proposal in disseminating content requests over the cellular network against a traditional networking solution119sem informaçãosem informaçã

Optimal Scheduling Policy for Minimizing Age of Information with a Relay

We consider IoT sensor network where multiple sensors are connected to corresponding destination nodes via a relay. Thus, the relay schedules sensors to sample and destination nodes to update. The relay can select multiple sensors and destination nodes in each time. In order to minimize average weighted sum AoI, joint optimization of sampling and updating policy of the relay is investigated. For errorless and symmetric case where weights are equally given, necessary and sufficient conditions for optimality is found. Using this result, we obtain that the minimum average sum AoI in a closed-form expression which can be interpreted as fundamental limit of sum AoI in a single relay network. Also, for error-prone and symmetric case, we have proved that greedy policy achieves the minimum average sum AoI at the destination nodes. For general case, we have proposed scheduling policy obtained via reinforcement learning.Comment: 30 page

A Survey on Subsurface Signal Propagation

Wireless Underground Communication (WUC) is an emerging field that is being developed continuously. It provides secure mechanism of deploying nodes underground which shields them from any outside temperament or harsh weather conditions. This paper works towards introducing WUC and give a detail overview of WUC. It discusses system architecture of WUC along with the anatomy of the underground sensor motes deployed in WUC systems. It also compares Over-the-Air and Underground and highlights the major differences between the both type of channels. Since, UG communication is an evolving field, this paper also presents the evolution of the field along with the components and example UG wireless communication systems. Finally, the current research challenges of the system are presented for further improvement of the WUCs

Key Performance Indicators of the Reference 6TiSCH Implementation in Internet-of-Things Scenarios

International audienceTens of thousands of wireless industrial monitoring deployments exist today, logging more than 18 billion operating hours. These solutions have been around for over a decade and are based on standards such as WirelessHART and ISA100.11a to provide performance guarantees to the applications. The new trend in industry deployments is the convergence of operational and information technologies happening through the Industrial Internet of Things (IIoT) paradigm. The challenge is to bridge the performance of these well-proven industrial standards with the interoperability of IP-based systems. The Internet Engineering Task Force (IETF), the organization behind most of the technical solutions of the Internet, has produced a set of specifications with this requirement in mind. The output of this effort is the 6TiSCH protocol stack based on open standards, such as those that have played a key role in the Internet's ubiquitous adoption. The standardization of 6TiSCH is done. The state-of-the-art research work focus is on important, but niche, optimizations and performance evaluations of the 6TiSCH stack. This paper takes a different approach-it evaluates the performance of the standards-compliant 6TiSCH solution from the end user point of view. It does so on two experimental testbeds, in typical IoT test scenarios based on a well-defined experimentation methodology. We provide a set of Key Performance Indicators (KPIs) useful for the end user to decide whether the 6TiSCH technology is a good fit performance-wise for a particular use case. We demonstrate reliability of a vanilla open-source implementation of 6TiSCH above 99.99%, upstream latency on the order of a second and radio duty cycle well below 1%

Using Machine Learning and Big Data Analytics to Prioritize Outpatients in HetNets

In this paper, we introduce machine learning approaches that are used to prioritize outpatients (OP) according to their current health state, resulting in self-optimizing heterogeneous networks (HetNet) that intelligently adapt according to users' needs. We use a naïve Bayesian classifier to analyze data acquired from OPs' medical records, alongside data from medical Internet of Things (IoT) sensors that provide the current state of the OP. We use this machine learning algorithm to calculate the likelihood of a life-threatening medical condition, in this case an imminent stroke. An OP is assigned high-powered resource blocks (RBs) according to the seriousness of their current health state, enabling them to remain connected and send their critical data to the designated medical facility with minimal delay. Using a mixed integer linear programming formulation (MILP), we present two approaches to optimizing the uplink side of a HetNet in terms of user-RB assignment: a Weighted Sum Rate Maximization (WSRMax) approach and a Proportional Fairness (PF) approach. Using these approaches, we illustrate the utility of the proposed system in terms of providing reliable connectivity to medical IoT sensors, enabling the OPs to maintain the quality and speed of their connection. Moreover, we demonstrate how system response can change according to alterations in the OPs' medical conditions