Numerical and experimental transition results evaluation for a morphing wing and aileron system

A new wing-tip concept with morphing upper surface and interchangeable conventional and morphing ailerons was designed, manufactured, bench and wind tunnel tested. The development of this wing tip model was performed in the frame of an international CRIAQ project, and the purpose was to demonstrate the wing upper surface and aileron morphing capabilities in improving the wing tip aerodynamic performances. During numerical optimization with ‘in-house’ genetic algorithm software, and during wind tunnel experimental tests, it was demonstrated that the air flow laminarity over the wing skin was promoted, and the laminar flow was extended with up to 9% of the chord. Drag coefficient reduction of up to 9% was obtained when the morphing aileron was introduced

Brain Tissues Segmentation on MR Perfusion Images Using CUSUM Filter for Boundary Pixels

The fully automated and relatively accurate method of brain tissues segmentation on T2-weighted magnetic resonance perfusion images is proposed. Segmentation with this method provides a possibility to obtain perfusion region of interest on images with abnormal brain anatomy that is very important for perfusion analysis. In the proposed method the result is presented as a binary mask, which marks two regions: brain tissues pixels with unity values and skull, extracranial soft tissue and background pixels with zero values. The binary mask is produced based on the location of boundary between two studied regions. Each boundary point is detected with CUSUM filter as a change point for iteratively accumulated points at time of moving on a sinusoidal-like path along the boundary from one region to another. The evaluation results for 20 clinical cases showed that proposed segmentation method could significantly reduce the time and efforts required to obtain desirable results for perfusion region of interest detection on T2-weighted magnetic resonance perfusion images with abnormal brain anatomy

Brain tissues segmentation on MR perfusion images using CUSUM filter for boundary pixels

The fully automated and relatively accurate method of brain tissues segmentation on Т2-weighted magnetic resonance perfusion images is proposed. Segmentation with this method provides a possibility to obtain perfusion region of interest on images with abnormal brain anatomy that is very important for perfusion analysis. In the proposed method the result is presented as a binary mask, which marks two regions: brain tissues pixels with unity values and skull, extracranial soft tissue and background pixels with zero values. The binary mask is produced based on the location of boundary between two studied regions. Each boundary point is detected with CUSUM filter as a change point for iteratively accumulated points at time of moving on a sinusoidal-like path along the boundary from one region to another. The evaluation results for 20 clinical cases showed that proposed segmentation method could significantly reduce the time and efforts required to obtain desirable results for perfusion region of interest detection on Т2-weighted magnetic resonance perfusion images with abnormal brain anatomy

Systèmes cognitifs artificiels : du concept au développement de comportements intelligents en robotique autonome

Les travaux présentés dans le cadre de cette habilitation à diriger des recherches s’appuient sur le principe de la robotique développementale et plus particulièrement sur le paradigme de l’énaction. L’idée n’est donc pas de développer un robot intelligent, mais plutôt de concevoir un robot qui soit capable de le devenir. L’originalité du travail présenté dans ce mémoire repose sur le fait que le système cognitif artificiel est décomposé en deux parties distinctes : la première regroupe des processus cognitifs « inconscients » et la deuxième concerne les processus cognitifs « conscients ». Les processus cognitifs inconscients correspondent aux aptitudes (pré-programmées ou apprises) fonctionnant de manière quasi-automatique, alors que les processus cognitifs conscients contribuent au développement et à l’apprentissage de nouvelles aptitudes. La cognition associée au robot est donc le résultat d’un processus de développement par lequel le robot devient progressivement plus habile et acquiert les connaissances lui permettant d’interpréter le monde qui l’entoure.Ce mémoire se décompose en trois grandes parties. La première partie correspond à un curriculum vitae détaillé présentant l’ensemble de mon parcours professionnel. La deuxième partie est consacrée à la présentation plus approfondie de mes activités de recherches qui se sont focalisées sur le développement de systèmes cognitifs artificiels appliqués à la robotique avec des applications dans les domaines de la locomotion bipède, la perception et l’acquisition autonome de connaissances ainsi que les systèmes multi-robots et l’intelligence distribuée. Enfin, la troisième partie est une compilation de quatre articles de revue représentatives de l’ensemble de mes travaux de recherches

Políticas de Copyright de Publicações Científicas em Repositórios Institucionais: O Caso do INESC TEC

A progressiva transformação das práticas científicas, impulsionada pelo desenvolvimento das novas Tecnologias de Informação e Comunicação (TIC), têm possibilitado aumentar o acesso à informação, caminhando gradualmente para uma abertura do ciclo de pesquisa. Isto permitirá resolver a longo prazo uma adversidade que se tem colocado aos investigadores, que passa pela existência de barreiras que limitam as condições de acesso, sejam estas geográficas ou financeiras. Apesar da produção científica ser dominada, maioritariamente, por grandes editoras comerciais, estando sujeita às regras por estas impostas, o Movimento do Acesso Aberto cuja primeira declaração pública, a Declaração de Budapeste (BOAI), é de 2002, vem propor alterações significativas que beneficiam os autores e os leitores. Este Movimento vem a ganhar importância em Portugal desde 2003, com a constituição do primeiro repositório institucional a nível nacional. Os repositórios institucionais surgiram como uma ferramenta de divulgação da produção científica de uma instituição, com o intuito de permitir abrir aos resultados da investigação, quer antes da publicação e do próprio processo de arbitragem (preprint), quer depois (postprint), e, consequentemente, aumentar a visibilidade do trabalho desenvolvido por um investigador e a respetiva instituição. O estudo apresentado, que passou por uma análise das políticas de copyright das publicações científicas mais relevantes do INESC TEC, permitiu não só perceber que as editoras adotam cada vez mais políticas que possibilitam o auto-arquivo das publicações em repositórios institucionais, como também que existe todo um trabalho de sensibilização a percorrer, não só para os investigadores, como para a instituição e toda a sociedade. A produção de um conjunto de recomendações, que passam pela implementação de uma política institucional que incentive o auto-arquivo das publicações desenvolvidas no âmbito institucional no repositório, serve como mote para uma maior valorização da produção científica do INESC TEC.The progressive transformation of scientific practices, driven by the development of new Information and Communication Technologies (ICT), which made it possible to increase access to information, gradually moving towards an opening of the research cycle. This opening makes it possible to resolve, in the long term, the adversity that has been placed on researchers, which involves the existence of barriers that limit access conditions, whether geographical or financial. Although large commercial publishers predominantly dominate scientific production and subject it to the rules imposed by them, the Open Access movement whose first public declaration, the Budapest Declaration (BOAI), was in 2002, proposes significant changes that benefit the authors and the readers. This Movement has gained importance in Portugal since 2003, with the constitution of the first institutional repository at the national level. Institutional repositories have emerged as a tool for disseminating the scientific production of an institution to open the results of the research, both before publication and the preprint process and postprint, increase the visibility of work done by an investigator and his or her institution. The present study, which underwent an analysis of the copyright policies of INESC TEC most relevant scientific publications, allowed not only to realize that publishers are increasingly adopting policies that make it possible to self-archive publications in institutional repositories, all the work of raising awareness, not only for researchers but also for the institution and the whole society. The production of a set of recommendations, which go through the implementation of an institutional policy that encourages the self-archiving of the publications developed in the institutional scope in the repository, serves as a motto for a greater appreciation of the scientific production of INESC TEC

Détection et suivi d'objets mobiles perçus depuis un capteur visuel embarqué

Cette thèse traite de la détection et du suivi d'objets mobiles dans un environnement dynamique, en utilisant une caméra embarquée sur un robot mobile. Ce sujet représente encore un défi important car on exploite uniquement la vision mono-caméra pour le résoudre. Nous devons détecter les objets mobiles dans la scène par une analyse de leurs déplacements apparents dans les images, en excluant le mouvement propre de la caméra. Dans une première étape, nous proposons une analyse spatio-temporelle de la séquence d'images, sur la base du flot optique épars. La méthode de clustering a contrario permet le groupement des points dynamiques, sans information a priori sur le nombre de groupes à former et sans réglage de paramètres. La réussite de cette méthode réside dans une accumulation suffisante des données pour bien caractériser la position et la vitesse des points. Nous appelons temps de pistage, le temps nécessaire pour acquérir les images analysées pour bien caractériser les points. Nous avons développé une carte probabiliste afin de trouver les zones dans l'image qui ont les probabilités la plus grandes de contenir un objet mobile. Cette carte permet la sélection active de nouveaux points près des régions détectées précédemment en permettant d'élargir la taille de ces régions. Dans la deuxième étape nous mettons en oeuvre une approche itérative pour exécuter détection, clustering et suivi sur des séquences d'images acquises depuis une caméra fixe en intérieur et en extérieur. Un objet est représenté par un contour actif qui est mis à jour de sorte que le modèle initial reste à l'intérieur du contour. Finalement nous présentons des résultats expérimentaux sur des images acquises depuis une caméra embarquée sur un robot mobile se déplaçant dans un environnement extérieur avec des objets mobiles rigides et non rigides. Nous montrons que la méthode est utilisable pour détecter des obstacles pendant la navigation dans un environnement inconnu a priori, d'abord pour des faibles vitesses, puis pour des vitesses plus réalistes après compensation du mouvement propre du robot dans les images.This dissertation concerns the detection and the tracking of mobile objets in a dynamic environment, using a camera embedded on a mobile robot. It is an important challenge because only a single camera is used to solve the problem.We must detect mobile objects in the scene, analyzing their apparent motions on images, excluding the motion caused by the ego-motion of the camera. First it is proposed a spatio-remporal analysis of the image sequence based on the sparse optical flow. The a contrario clustering method provides the grouping of dynamic points, without using a priori information and without parameter tuning. This method success is based on the accretion of sufficient information on positions and velocities of these points. We call tracking time, the time required in order to acquire images analyzed to provide the points characterization. A probabilistic map is built in order to find image areas with the higher probabilities to find a mobile objet; this map allows an active selection of new points close the previously detected mobile regions, making larger these regions. In a second step, it is proposed an iterative approach to perform the detection-clustering-tracking process on image sequences acquired from a fixed camera for indoor or outdoor applications. An object is described by an active contour, updated so that the initial object model remains inside the contour. Finally it is presented experimental results obtained on images acquired from a camera embedded on a mobile robot navigating in outdoor environments with rigid or non rigid mobile objects ; it is shown that the method works to detect obstacles during the navigation in a priori unknown environments, first with a weak speed, then with more a realistic speed, compensating the robot ego-motion in images

Fuzzy Controllers

Trying to meet the requirements in the field, present book treats different fuzzy control architectures both in terms of the theoretical design and in terms of comparative validation studies in various applications, numerically simulated or experimentally developed. Through the subject matter and through the inter and multidisciplinary content, this book is addressed mainly to the researchers, doctoral students and students interested in developing new applications of intelligent control, but also to the people who want to become familiar with the control concepts based on fuzzy techniques. Bibliographic resources used to perform the work includes books and articles of present interest in the field, published in prestigious journals and publishing houses, and websites dedicated to various applications of fuzzy control. Its structure and the presented studies include the book in the category of those who make a direct connection between theoretical developments and practical applications, thereby constituting a real support for the specialists in artificial intelligence, modelling and control fields

New methodologies for calculation of flight parameters on reduced scale wings models in wind tunnel

In order to improve the qualities of wind tunnel tests, and the tools used to perform aerodynamic tests on aircraft wings in the wind tunnel, new methodologies were developed and tested on rigid and flexible wings models. A flexible wing concept is consists in replacing a portion (lower and/or upper) of the skin with another flexible portion whose shape can be changed using an actuation system installed inside of the wing. The main purpose of this concept is to improve the aerodynamic performance of the aircraft, and especially to reduce the fuel consumption of the airplane. Numerical and experimental analyses were conducted to develop and test the methodologies proposed in this thesis. To control the flow inside the test sections of the Price-Païdoussis wind tunnel of LARCASE, numerical and experimental analyses were performed. Computational fluid dynamics calculations have been made in order to obtain a database used to develop a new hybrid methodology for wind tunnel calibration. This approach allows controlling the flow in the test section of the Price-Païdoussis wind tunnel. For the fast determination of aerodynamic parameters, new hybrid methodologies were proposed. These methodologies were used to control flight parameters by the calculation of the drag, lift and pitching moment coefficients and by the calculation of the pressure distribution around an airfoil. These aerodynamic coefficients were calculated from the known airflow conditions such as angles of attack, the mach and the Reynolds numbers. In order to modify the shape of the wing skin, electric actuators were installed inside the wing to get the desired shape. These deformations provide optimal profiles according to different flight conditions in order to reduce the fuel consumption. A controller based on neural networks was implemented to obtain desired displacement actuators. A metaheuristic algorithm was used in hybridization with neural networks, and support vector machine approaches and their combination was optimized, and very good results were obtained in a reduced computing time. The validation of the obtained results has been made using numerical data obtained by the XFoil code, and also by the Fluent code. The results obtained using the méthodologies presented in this thesis have been validated with experimental data obtained using the subsonic Price-Païdoussis blow down wind tunnel