Hyperspectral sub-pixel target detection using hybrid algorithms and Physics Based Modeling

This thesis develops a new hybrid target detection algorithm called the Physics Based-Structured InFeasibility Target-detector (PB-SIFT) which incorporates Physics Based Modeling (PBM) along with a new Structured Infeasibility Projector (SIP) metric. Traditional matched filters are susceptible to leakage or false alarms due to bright or saturated pixels that appear target-like to hyperspectral detection algorithms but are not truly target. This detector mitigates against such false alarms. More often than not, detection algorithms are applied to atmospherically compensated hyperspectral imagery. Rather than compensate the imagery, we take the opposite approach by using a physics based model to generate permutations of what the target might look like as seen by the sensor in radiance space. The development and status of such a method is presented as applied to the generation of target spaces. The generated target spaces are designed to fully encompass image target pixels while using a limited number of input model parameters. Evaluation of such target spaces shows that they can reproduce a HYDICE image target pixel spectrum to less than 1% RMS error (equivalent reflectance) in the visible and less than 6% in the near IR. Background spaces are modeled using a linear subspace (structured) approach characterized by basis vectors found by using the maximum distance method (MaxD). The SIP is developed along with a Physics Based Orthogonal Projection Operator (PBosp) which produces a 2 dimensional decision space. Results from the HYDICE FR I data set show that the physics based approach, along with the PB-SIFT algorithm, can out perform the Spectral Angle Mapper (SAM) and Spectral Matched Filter (SMF) on both exposed and fully concealed man-made targets found in hyperspectral imagery. Furthermore, the PB-SIFT algorithm performs as good (if not better) than the Mixture Tuned Matched Filter (MTMF)

Fast and Accurate Retrieval of Methane Concentration From Imaging Spectrometer Data Using Sparsity Prior

The strong radiative forcing by atmospheric methane has stimulated interest in identifying natural and anthropogenic sources of this potent greenhouse gas. Point sources are important targets for quantification, and anthropogenic targets have the potential for emissions reduction. Methane point-source plume detection and concentration retrieval have been previously demonstrated using data from the Airborne Visible InfraRed Imaging Spectrometer-Next Generation (AVIRIS-NG). Current quantitative methods have tradeoffs between computational requirements and retrieval accuracy, creating obstacles for processing real-time data or large data sets from flight campaigns. We present a new computationally efficient algorithm that applies sparsity and an albedo correction to matched the filter retrieval of trace gas concentration path length. The new algorithm was tested using the AVIRIS-NG data acquired over several point-source plumes in Ahmedabad, India. The algorithm was validated using the simulated AVIRIS-NG data, including synthetic plumes of known methane concentration. Sparsity and albedo correction together reduced the root-mean-squared error of retrieved methane concentration-path length enhancement by 60.7% compared with a previous robust matched filter method. Background noise was reduced by a factor of 2.64. The new algorithm was able to process the entire 300 flight line 2016 AVIRIS-NG India campaign in just over 8 h on a desktop computer with GPU acceleration

Fast and Accurate Retrieval of Methane Concentration from Imaging Spectrometer Data Using Sparsity Prior

The strong radiative forcing by atmospheric methane has stimulated interest in identifying natural and anthropogenic sources of this potent greenhouse gas. Point sources are important targets for quantification, and anthropogenic targets have potential for emissions reduction. Methane point source plume detection and concentration retrieval have been previously demonstrated using data from the Airborne Visible InfraRed Imaging Spectrometer Next Generation (AVIRIS-NG). Current quantitative methods have tradeoffs between computational requirements and retrieval accuracy, creating obstacles for processing real-time data or large datasets from flight campaigns. We present a new computationally efficient algorithm that applies sparsity and an albedo correction to matched filter retrieval of trace gas concentration-pathlength. The new algorithm was tested using AVIRIS-NG data acquired over several point source plumes in Ahmedabad, India. The algorithm was validated using simulated AVIRIS-NG data including synthetic plumes of known methane concentration. Sparsity and albedo correction together reduced the root mean squared error of retrieved methane concentration-pathlength enhancement by 60.7% compared with a previous robust matched filter method. Background noise was reduced by a factor of 2.64. The new algorithm was able to process the entire 300 flightline 2016 AVIRIS-NG India campaign in just over 8 hours on a desktop computer with GPU acceleration.Comment: 13 pages, 11 figure

Spectral Detection of Human Skin in VIS-SWIR Hyperspectral Imagery without Radiometric Calibration

Many spectral detection algorithms require precise ground truth measurements that are hand-selected in the image to apply radiometric calibration, converting image pixels into estimated reflectance vectors. That process is impractical for mobile, real-time hyperspectral target detection systems, which cannot empirically derive a pixel-to-reflectance relationship from objects in the image. Implementing automatic target recognition on high-speed snapshot hyperspectral cameras requires the ability to spectrally detect targets without performing radiometric calibration. This thesis demonstrates human skin detection on hyperspectral data collected at a high frame rate without using calibration panels, even as the illumination in the scene changes. Compared to an established skin detection method that requires calibration panels, the illumination-invariant methods in this thesis achieve nearly as good detection performance in sunny scenes and superior detection performance in cloudy scenes

Improving Hyperspectral Subpixel Target Detection Using Hybrid Detection Space

A Hyper-Spectral Image (HSI) has high spectral and low spatial resolution. As a result, most targets exist as subpixels, which pose challenges in target detection. Moreover, limitation of target and background samples always hinders the target detection performance. In this thesis, a hybrid method for subpixel target detection of an HSI using minimal prior knowledge is developed. The Matched Filter (MF) and Adaptive Cosine Estimator (ACE) are two popular algorithms in HSI target detection. They have different advantages in differentiating target from background. In the proposed method, the scores of MF and ACE algorithms are used to construct a hybrid detection space. First, some high abundance target spectra are randomly picked from the scene to perform initial detection to determine the target and background subsets. Then, the reference target spectrum and background covariance matrix are improved iteratively, using the hybrid detection space. As the iterations continue, the reference target spectrum gets closer and closer to the central line that connects the centers of target and background and resulting in noticeable improvement in target detection. Two synthetic datasets and two real datasets are used in the experiments. The results are evaluated based on the mean detection rate, Receiver Operating Characteristic (ROC) curve and observation of the detection results. Compared to traditional MF and ACE algorithms with Reed-Xiaoli Detector (RXD) background covariance matrix estimation, the new method shows much better performance on all four datasets. This method can be applied in environmental monitoring, mineral detection, as well as oceanography and forestry reconnaissance to search for extremely small target distribution in a large scene

Airborne Forward-Looking Interferometer for the Detection of Terminal-Area Hazards

The Forward Looking Interferometer (FLI) program was a multi-year cooperative research effort to investigate the use of imaging radiometers with high spectral resolution, using both modeling/simulation and field experiments, along with sophisticated data analysis techniques that were originally developed for analysis of data from space-based radiometers and hyperspectral imagers. This investigation has advanced the state of knowledge in this technical area, and the FLI program developed a greatly improved understanding of the radiometric signal strength of aviation hazards in a wide range of scenarios, in addition to a much better understanding of the real-world functionality requirements for hazard detection instruments. The project conducted field experiments on three hazards (turbulence, runway conditions, and wake vortices) and analytical studies on several others including volcanic ash, reduced visibility conditions, in flight icing conditions, and volcanic ash

A subpixel target detection algorithm for hyperspectral imagery

The goal of this research is to develop a new algorithm for the detection of subpixel scale target materials on the hyperspectral imagery. The signal decision theory is typically to decide the existence of a target signal embedded in the random noise. This implies that the detection problem can be mathematically formalized by signal decision theory based on the statistical hypothesis test. In particular, since any target signature provided by airborne/spaceborne sensors is embedded in a structured noise such as background or clutter signatures as well as broad band unstructured noise, the problem becomes more complicated, and particularly much more under the unknown noise structure. The approach is based on the statistical hypothesis method known as Generalized Likelihood Ratio Test (GLRT). The use of GLRT requires estimating the unknown parameters, and assumes the prior information of two subspaces describing target variation and background variation respectively. Therefore, this research consists of two parts, the implementation of GLRT and the characterization of two subspaces through new approaches. Results obtained from computer simulation, HYDICE image and AVI RIS image show that this approach is feasible

Performance comparison of hyperspectral target detection algorithms

This thesis performs a performance comparison on existing hyperspectral target detection algorithms. The algorithms chosen for this analysis include multiple adaptive matched filters and the physics based modeling invariant technique. The adaptive matched filter algorithms can be divided into either structured (geometrical) or unstructured (statistical) algorithms. The difference between these two categories is in the manner in which the background is characterized. The target detection procedure includes multiple pre-processing steps that are examined here as well. The effects of atmospheric compensation, dimensionality reduction, background characterization, and target subspace creation are all analyzed in terms of target detection performance. At each step of the process, techniques were chosen that consistently improved target detection performance. The best case scenario for each algorithm is used in the final comparison of performance. The results for multiple targets were computed and statistical matched filter algorithms were shown to outperform all others in a fair comparison. This fair comparison utilized a FLAASH atmospheric compensation for the matched filters that was equivalent to the physics based invariant process. The invariant technique was shown to outperform the geometric matched filters that it uses in its approach. Each of these techniques showed improvement over the SAM algorithm for three of the four targets analyzed. Multiple theories are proposed to explain the anomalous results for the most difficult target