21 research outputs found

    Docking Manoeuvre Control for CubeSats

    Get PDF
    Rendezvous and Docking missions of small satellites are opening new scenarios to accomplish unprecedented in-obit operations. These missions impose to win the new technical challenges that enable the possibility to successfully perform complex and safety-critical manoeuvres. The disturbance forces and torques due to the hostile space environment, the uncertainties introduced by the onboard technologies and the safety constraints and reliability requirements lead to select advanced control systems. The paper proposes a control strategy based on Model Predictive Control for trajectory control and Sliding Mode Control for attitude control of the chaser in last meters before the docking. The control performances are verified in a dedicated simulation environment in which a non-linear six Degrees of Freedom and coupled dynamics, uncertainties on sensors and actuators responses are included. A set of 300 Monte Carlo Simulation with this Non-Linear system are carried out, demonstrating the capabilities of the proposed control system to achieve the final docking point with the required accuracy

    Sliding Mode Control

    Get PDF
    The main objective of this monograph is to present a broad range of well worked out, recent application studies as well as theoretical contributions in the field of sliding mode control system analysis and design. The contributions presented here include new theoretical developments as well as successful applications of variable structure controllers primarily in the field of power electronics, electric drives and motion steering systems. They enrich the current state of the art, and motivate and encourage new ideas and solutions in the sliding mode control area

    AAS/GSFC 13th International Symposium on Space Flight Dynamics

    Get PDF
    This conference proceedings preprint includes papers and abstracts presented at the 13th International Symposium on Space Flight Dynamics. Cosponsored by American Astronautical Society and the Guidance, Navigation and Control Center of the Goddard Space Flight Center, this symposium featured technical papers on a wide range of issues related to orbit-attitude prediction, determination, and control; attitude sensor calibration; attitude dynamics; and mission design

    Dynamical modelling of a flexible motorised momentum exchange tether and hybrid fuzzy sliding mode control for spin-up

    Get PDF
    A space tether is a long cable used to couple satellites, probes or spacecrafts to each other or to other masses, such as a spent booster rocket, space station, or an asteroid. Space tethers are usually made of thin strands of high-strength fibres or conducting wires, which range from a few hundred metres to several kilometres and have a relatively small diameter. Space tethers can provide a mechanical connection between two space objects that enables a transfer of energy and momentum from one object to the other, and as a result they can be used to provide space propulsion without consuming propellant. Additionally, conductive space tethers can interact with the Earth's magnetic field and ionospheric plasma to generate thrust or drag forces without expending propellant. The motorised momentum exchange tether (MMET) was first proposed by Cartmell in 1996 and published in 1998. The system comprises a specially designed tether connecting two payload modules, with a central launcher motor. For the purposes of fundamental dynamical modelling the launcher mass can be regarded as a two part assembly, where the rotor is attached to one end of each tether subspan, and the other side is the stator, which is attached to the rotor by means of suitable bearings. Both the launcher and the payload can be attached to the tether by means of suitable clamps or bearing assemblies, dependent on the requirements of the design. The further chapters in this thesis focus on a series of dynamical models of the symmetrical MMET syste, including the dumbbell MMET system, the solid massless MMET system, the flexible massless MMET system, the solid MMET system and the discretised flexible MMET system. The models in this context have shown that including axial, torsional and pendular elasticity, the MMET systems have a significant bearing on overall performance and that this effect should not be ignored in future, particularly for control studies. All subsequent analyses for control applications should henceforth include flexible compliance within the modelling procedure. Numerical simulations have been given for all types of MMET models, in which, accurate and stable periodic behaviours are observed, including the rigid body motions, the tether spin-up and the flexible motions, with proper parameter settings. The MMET system's spin-up control methods design and analysis will henceforth be referenced on the results. For the non-linear dynamics and complex control problem, it was decided to investigate fuzzy logic based controllers to maintain the desired length and length deployment rate of the tether. A standard two input and one output fuzzy logic control (FLC) is investigated with numerical simulations, in which the control effects on the MMET system's spin-up are observed. Furthermore, to make the necessary enhancement to the fuzzy sliding mode control, a specialised hybrid control law, named Fα\alphaSMC is proposed, which combines fuzzy logic control with a SkyhookSMC control law together, then it is applied for the control of motorised space tether spin-up coupled with an flexible oscillation phenomenon. It is easy to switch the control effects between the SkyhookSMC and the FLC modes when a proper value of α\alpha is selected (0<α<1)(0<\alpha<1) to balance the weight of the fuzzy logic control to that of the SkyhookSMC control, and the hybrid fuzzy sliding mode controller is thus generated. Next, the simulations with the given initial conditions have been devised in a connecting programme between the control code written in MATLABMATLAB and the dynamics simulation code constructed within MATHEMATICAMATHEMATICA. Both the FLC and the hybrid fuzzy sliding mode control methods are designed for the control of spin-up of the discretised flexible MMET system with tether-tube subspans, and the results have shown the validated effects of both these control methods for the MMET system spin-up with included flexible oscillation. To summarise, the objectives of this thesis are, firstly, to propose a series of new dynamical models for the motorised momentum exchange tethers; secondly, to discuss two types of control methods for the spin-up behaviour of a flexible motorised momentum exchange tether, which include a fuzzy logic control and a hybrid fuzzy sliding mode control. By the weight factor α\alpha, fuzzy logic control and SkyhookSMC controllers can be balanced from one to each other, and there is observed difference for each of the elastic behaviour in the MMET system involving these MMET systems with different controllers - FLC(α=1\alpha = 1), Fα\alphaSMC(α=0.5\alpha = 0.5) and SkyhookSMC(α=0.0\alpha = 0.0). The results state the control effects for FLC, Fα\alphaSMC and FLC, which lead to stable spin-up behaviour with flexible oscillations

    Large space structures and systems in the space station era: A bibliography with indexes

    Get PDF
    Bibliographies and abstracts are listed for 1219 reports, articles, and other documents introduced into the NASA scientific and technical information system between July 1, 1990 and December 31, 1990. The purpose is to provide helpful information to the researcher, manager, and designer in technology development and mission design according to system, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion, and solar power satellite systems

    Space station systems: A bibliography with indexes (supplement 10)

    Get PDF
    This bibliography lists 1,422 reports, articles, and other documents introduced into the NASA scientific and technical information system between July 1, 1989 and December 31, 1989. Its purpose is to provide helpful information to researchers, designers and managers engaged in Space Station technology development and mission design. Coverage includes documents that define major systems and subsystems related to structures and dynamic control, electronics and power supplies, propulsion, and payload integration. In addition, orbital construction methods, servicing and support requirements, procedures and operations, and missions for the current and future Space Station are included

    1999 Flight Mechanics Symposium

    Get PDF
    This conference publication includes papers and abstracts presented at the Flight Mechanics Symposium held on May 18-20, 1999. Sponsored by the Guidance, Navigation and Control Center of Goddard Space Flight Center, this symposium featured technical papers on a wide range of issues related to orbit-attitude prediction, determination, and control; attitude sensor calibration; attitude determination error analysis; attitude dynamics; and orbit decay and maneuver strategy. Government, industry, and the academic community participated in the preparation and presentation of these papers

    Large space structures and systems in the space station era: A bibliography with indexes (supplement 05)

    Get PDF
    Bibliographies and abstracts are listed for 1363 reports, articles, and other documents introduced into the NASA scientific and technical information system between January 1, 1991 and July 31, 1992. Topics covered include technology development and mission design according to system, interactive analysis and design, structural and thermal analysis and design, structural concepts and control systems, electronics, advanced materials, assembly concepts, propulsion and solar power satellite systems

    Nonlinear Control of Unmanned Aerial Vehicles : Systems With an Attitude

    Get PDF
    This thesis deals with the general problem of controlling rigid-body systems through space, with a special focus on unmanned aerial vehicles (UAVs). Several promising UAV control algorithms have been developed over the past decades, enabling truly astounding feats of agility when combined with modern sensing technologies. However, these control algorithms typically come without global stability guarantees when implemented with estimation algorithms. Such control systems work well most of the time, but when introducing the UAVs more widely in society, it becomes paramount to prove that stability is ensured regardless of how the control system is initialized.The main motivation of the research lies in providing such (almost) global stability guarantees for an entire UAV control system. We develop algorithms that are implementable in practice and for which (almost) all initial errors result in perfect tracking of a reference trajectory. In doing so, both the tracking and the estimation errors are shown to be bounded in time along (almost) all solutions of the closed-loop system. In other words, if the initialization is sound and the initial errors are small, they will remain small and decrease in time, and even if the initial errors are large, they will not increase with time.As the field of UAV control is mature, this thesis starts by reviewing some of the most promising approaches to date in Part I. The ambition is to clarify how various controllers are related, provide intuition, and demonstrate how they work in practice. These ideas subsequently form the foundation on which a new result is derived, referred to as a nonlinear filtered output feedback. This represents a diametrically different approach to the control system synthesis. Instead of a disjoint controller/estimator design, the proposed method is comprised of two controller/estimator pairs, which when combined through a special interconnection term yields a system with favorable stability properties.While the first part of the thesis deals with theoretical controller design,Part II concerns application examples, demonstrating how the theory can solve challenging problems in modern society. In particular, we consider the problem of circumnavigation for search and rescue missions and show how UAVs can gather data from radioactive sites to estimate radiation intensity
    corecore