Performance Analysis of Millimeter Wave Massive MIMO Systems in Centralized and Distributed Schemes

This paper considers downlink multi-user millimeter-wave massive multiple-input multiple-output (MIMO) systems in both centralized and distributed configurations, referred to as C-MIMO and D-MIMO, respectively. Assuming the fading channel is composite and comprised of both large-scale fading and small-scale fading, a hybrid precoding algorithm leveraging antenna array response vectors is applied into both the C-MIMO system with fully connected structure and the D-MIMO system with partially connected structure. First, the asymptotic spectral efficiency (SE) of an arbitrary user and the asymptotic average SE of the cell for the C-MIMO system are analyzed. Then, two radio access unit (RAU) selection algorithms are proposed for the D-MIMO system, based on minimal distance (D-based) and maximal signal-to-interference-plus-noise-ratio (SINR) (SINR-based), respectively. For the D-MIMO system with circular layout and D-based RAU selection algorithm, the upper bounds on the asymptotic SE of an arbitrary user and the asymptotic average SE of the cell are also investigated. Finally, numerical results are provided to assess the analytical results and evaluate the effects of the numbers of total transmit antennas and users on system performance. It is shown that, from the perspective of the cell, the D-MIMO system with D-based scheme outperforms the C-MIMO system and achieves almost alike performance compared with the SINR-based solution while requiring less complexity.Peer reviewe

State-of-the-art assessment of 5G mmWave communications

Deliverable D2.1 del proyecto 5GWirelessMain objective of the European 5Gwireless project, which is part of the H2020 Marie Slodowska- Curie ITN (Innovative Training Networks) program resides in the training and involvement of young researchers in the elaboration of future mobile communication networks, focusing on innovative wireless technologies, heterogeneous network architectures, new topologies (including ultra-dense deployments), and appropriate tools. The present Document D2.1 is the first deliverable of Work- Package 2 (WP2) that is specifically devoted to the modeling of the millimeter-wave (mmWave) propagation channels, and development of appropriate mmWave beamforming and signal processing techniques. Deliver D2.1 gives a state-of-the-art on the mmWave channel measurement, characterization and modeling; existing antenna array technologies, channel estimation and precoding algorithms; proposed deployment and networking techniques; some performance studies; as well as a review on the evaluation and analysis toolsPostprint (published version

Low-Complexity and Robust Hybrid Beamforming Design for Multi-Antenna Communication Systems

This paper proposes a low-complexity hybrid beamforming design for multi-antenna communication systems. The hybrid beamformer is comprised of a baseband digital beamformer and a constant modulus analog beamformer in the radio frequency (RF) part of the system. As in singular-value-decomposition (SVD)-based beamforming, hybrid beamforming design aims to generate parallel data streams in multi-antenna systems, however, due to the constant modulus constraint of the analog beamformer, the problem cannot be solved similarly. To address this problem, mathematical expressions of the parallel data streams are derived in this paper and desired and interfering signals are specified per stream. The analog beamformers are designed by maximizing the power of desired signal while minimizing the sum-power of interfering signals. Finally, digital beamformers are derived by defining the equivalent channel observed by the transmitter/receiver. Regardless of the number of the antennas or type of channel, the proposed approach can be applied to a wide range of MIMO systems with hybrid structure wherein the number of the antennas is more than the number of the RF chains. In particular, the proposed algorithm is verified for sparse channels that emulate mm-wave transmission as well as rich scattering environments. In order to validate the optimality, the results are compared with those of the state-of-the-art and it is demonstrated that the performance of the proposed method outperforms state-of-the-art techniques, regardless of type of the channel and/or system configuration

Optimal Hybrid Beamforming Design for Millimeter-Wave Massive Multi-User MIMO Relay Systems

As a promising technology in the next generation mobile network, millimeter-wave (mmWave) communication can mitigate the spectrum crunch of improving the network capacity by exploiting the large underutilized spectrum bands of the mmWave frequencies. The hybrid (analog/digital) beamforming of multi-data streams are widely used to further the spectrum efficiency of mmWave relay system when faced with the complex environment or long distance communication. This paper investigates the hybrid beamforming scheme for the decode-and-forward (DF) mmWave massive multiple-input multiple-output (MIMO) relay system with mixed structure and full-connected structure. We optimize hybrid beamforming of relay system by maximizing the sum rate of the overall system as an objective function. To reduce the computational complexity, we reformulate the original problem as two single-hop mmWave MIMO sum-rate maximization subproblems. Then, the piecewise successive approximation method is proposed based on the criterion which jointly designs the analog and digital beamforming stages by trying to avoid the loss of information at each stage. The hybrid beamforming of the two subproblems can be solved by the proposed scheme united with the idea of successive interference cancelation (SIC), the baseband block diagonalization (BD) scheme, and waterfilling power allocation method. Finally, simulation results confirm that the proposed optimal method can achieve good performance in hybrid beamforming design of relay system with both mixed and full-connected structures

Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey

In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner

MmWave Amplify-and-Forward MIMO Relay Networks with Hybrid Precoding/Combining Design

In this paper, we consider the amplify-and-forward relay networks in mmWave systems and propose a hybrid precoder/combiner design approach. The phase-only RF precoding/combining matrices are first designed to support multi-stream transmission, where we compensate the phase for the eigenmodes of the channel. Then, the baseband precoders/combiners are performed to achieve the maximum mutual information. Based on the data processing inequality for the mutual information, we first jointly design the baseband source and relay nodes to maximize the mutual information before the destination baseband receiver. The proposed low-complexity iterative algorithm for the source and relay nodes is based on the equivalence between mutual information maximization and the weighted MMSE. After we obtain the optimal precoder and combiner for the source and relay nodes, we implement the MMSE-SIC filter at the baseband receiver to keep the mutual information unchanged, thus obtaining the optimal mutual information for the whole relay system. Simulation results show that our algorithm achieves better performance with lower complexity compared with other algorithms in the literature. In addition, we also propose a robust joint transceiver design for imperfect channel state information