13 research outputs found

    Hybrid Analog-Digital Transceiver Designs for Cognitive Radio Millimiter Wave Systems

    Get PDF
    Recent advances in Milimeter wave (mmWave) band mobile communications may provide solutions to the increasing traffic demand in modern wireless systems. Even though mmWave bands are scarcely occupied, the design of a prospect transceiver should guarantee the efficient coexistence with the incumbent services in these bands. To that end, in this paper, two underlay cognitive transceiver designs are proposed based on a hybrid Analog/Digital transceiver architecture that enables the mmWave spectrum access while controlling the interference to the incumbent users with low hardware complexity and power consumption. The first cognitive solution designs a codebook free cognitive hybrid pre-coder by maximizing the mutual information between its two ends subject to interference, power and hardware constraints related to the analog counterpart. The second solution is codebook based and exhibits less complexity than the first one at the cost of inferior spectral efficiency. A novel codebook free solution for the post-coder at the cognitive receiver part is further proposed, based on a hardware constrained Minimum Mean Square Error criterion. Simulations study the performance of both the proposed hybrid approaches and compare it to the one of a fully digital solution for typical wireless environments

    Hybrid analog-digital transmit beamforming for spectrum sharing backhaul networks

    Get PDF
    © 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This paper deals with the problem of analog-digital transmit beamforming under spectrum sharing constraints for backhaul systems. In contrast to fully digital designs, where the spatial processing is done at baseband unit with all the flexible computational resources of digital processors, analog-digital beamforming schemes require that certain processing is done through analog components, such as phase-shifters or switches. These analog components do not have the same processing flexibility as the digital processor, but on the other hand, they can substantially reduce the cost and complexity of the beamforming solution. This paper presents the joint optimization of the analog and digital parts, which results in a nonconvex, NP-hard, and coupled problem. In order to solve it, an alternating optimization with a penalized convex-concave method is proposed. According to the simulation results, this novel iterative procedure is able to find a solution that behaves close to the fully digital beamforming upper bound scheme.Peer ReviewedPostprint (author's final draft

    On the Energy-Efficiency of Hybrid Analog-Digital Transceivers for Single- and Multi-carrier Large Antenna Array Systems

    Get PDF
    Hybrid Analog-Digital transceivers are employed with the view to reduce the hardware complexity and the energy consumption in millimeter wave/large antenna array systems by reducing the number of their Radio Frequency (RF) chains. However, the analog processing network requires power for its operation and it further introduces power losses, dependent on the number of the transceiver antennas and RF chains, that have to be compensated. Thus, the reduction in the power consumption is usually much less than it is expected and given that the hybrid solutions present in general inferior spectral efficiency than a fully digital one, it is possible for the former to be less energy efficient than the latter in several cases. Existing approaches propose hybrid solutions that maximize the spectral efficiency of the system without providing any insight on their energy requirements/efficiency. To that end, in this paper, a novel algorithmic framework is developed based on which energy efficient hybrid transceiver designs are derived and their performance is examined with respect to the number of RF chains and antennas. Solutions are proposed for fully and partially connected hybrid architectures and for both single- and multi-carrier systems under the Orthogonal Frequency Division Multiplexing (OFDM) modulation. Simulations and theoretical results provide insight on the cases where a hybrid transceiver is the most energy efficient solution or not

    Optimization of Massive Full-Dimensional MIMO for Positioning and Communication

    Full text link
    Massive Full-Dimensional multiple-input multiple-output (FD-MIMO) base stations (BSs) have the potential to bring multiplexing and coverage gains by means of three-dimensional (3D) beamforming. Key technical challenges for their deployment include the presence of limited-resolution front ends and the acquisition of channel state information (CSI) at the BSs. This paper investigates the use of FD-MIMO BSs to provide simultaneously high-rate data communication and mobile 3D positioning in the downlink. The analysis concentrates on the problem of beamforming design by accounting for imperfect CSI acquisition via Time Division Duplex (TDD)-based training and for the finite resolution of analog-to-digital converter (ADC) and digital-to-analog converter (DAC) at the BSs. Both \textit{unstructured beamforming} and a low-complexity \textit{Kronecker beamforming} solution are considered, where for the latter the beamforming vectors are decomposed into separate azimuth and elevation components. The proposed algorithmic solutions are based on Bussgang theorem, rank-relaxation and successive convex approximation (SCA) methods. Comprehensive numerical results demonstrate that the proposed schemes can effectively cater to both data communication and positioning services, providing only minor performance degradations as compared to the more conventional cases in which either function is implemented. Moreover, the proposed low-complexity Kronecker beamforming solutions are seen to guarantee a limited performance loss in the presence of a large number of BS antennas.Comment: 30 pages, 6 figure

    Physical Layer Security in Integrated Sensing and Communication Systems

    Get PDF
    The development of integrated sensing and communication (ISAC) systems has been spurred by the growing congestion of the wireless spectrum. The ISAC system detects targets and communicates with downlink cellular users simultaneously. Uniquely for such scenarios, radar targets are regarded as potential eavesdroppers which might surveil the information sent from the base station (BS) to communication users (CUs) via the radar probing signal. To address this issue, we propose security solutions for ISAC systems to prevent confidential information from being intercepted by radar targets. In this thesis, we firstly present a beamformer design algorithm assisted by artificial noise (AN), which aims to minimize the signal-to-noise ratio (SNR) at the target while ensuring the quality of service (QoS) of legitimate receivers. Furthermore, to reduce the power consumed by AN, we apply the directional modulation (DM) approach to exploit constructive interference (CI). In this case, the optimization problem is designed to maximize the SINR of the target reflected echoes with CI constraints for each CU, while constraining the received symbols at the target in the destructive region. Apart from the separate functionalities of radar and communication systems above, we investigate sensing-aided physical layer security (PLS), where the ISAC BS first emits an omnidirectional waveform to search for and estimate target directions. Then, we formulate a weighted optimization problem to simultaneously maximize the secrecy rate and minimize the Cram\'er-Rao bound (CRB) with the aid of the AN, designing a beampattern with a wide main beam covering all possible angles of targets. The main beam width of the next iteration depends on the optimal CRB. In this way, the sensing and security functionalities provide mutual benefits, resulting in the improvement of mutual performances with every iteration of the optimization, until convergence. Overall, numerical results show the effectiveness of the ISAC security designs through the deployment of AN-aided secrecy rate maximization and CI techniques. The sensing-assisted PLS scheme offers a new approach for obtaining channel information of eavesdroppers, which is treated as a limitation of conventional PLS studies. This design gains mutual benefits in both single and multi-target scenarios

    1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

    Get PDF
    A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance
    corecore