Reactivity controlled compression ignition engine: Pathways towards commercial viability

© 2020 Elsevier Ltd. All rights reserved. This manuscript is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Licence (http://creativecommons.org/licenses/by-nc-nd/4.0/).Reactivity-controlled compression ignition (RCCI) is a promising energy conversion strategy to increase fuel efficiency and reduce nitrogen oxide (NOx) and soot emissions through improved in-cylinder combustion process. Considering the significant amount of conducted research and development on RCCI concept, the majority of the work has been performed under steady-state conditions. However, most thermal propulsion systems in transportation applications require operation under transient conditions. In the RCCI concept, it is crucial to investigate transient behavior over entire load conditions in order to minimize the engine-out emissions and meet new real driving emissions (RDE) legislation. This would help further close the gap between steady-state and transient operation in order to implement the RCCI concept into mass production. This work provides a comprehensive review of the performance and emissions analyses of the RCCI engines with the consideration of transient effects and vehicular applications. For this purpose, various simulation and experimental studies have been reviewed implementing different control strategies like control-oriented models particularly in dual-mode operating conditions. In addition, the application of the RCCI strategy in hybrid electric vehicle platforms using renewable fuels is also discussed. The discussion of the present review paper provides important insights for future research on the RCCI concept as a commercially viable energy conversion strategy for automotive applications.Peer reviewe

Urban and extra-urban hybrid vehicles: a technological review

Pollution derived from transportation systems is a worldwide, timelier issue than ever. The abatement actions of harmful substances in the air are on the agenda and they are necessary today to safeguard our welfare and that of the planet. Environmental pollution in large cities is approximately 20% due to the transportation system. In addition, private traffic contributes greatly to city pollution. Further, “vehicle operating life” is most often exceeded and vehicle emissions do not comply with European antipollution standards. It becomes mandatory to find a solution that respects the environment and, realize an appropriate transportation service to the customers. New technologies related to hybrid –electric engines are making great strides in reducing emissions, and the funds allocated by public authorities should be addressed. In addition, the use (implementation) of new technologies is also convenient from an economic point of view. In fact, by implementing the use of hybrid vehicles, fuel consumption can be reduced. The different hybrid configurations presented refer to such a series architecture, developed by the researchers and Research and Development groups. Regarding energy flows, different strategy logic or vehicle management units have been illustrated. Various configurations and vehicles were studied by simulating different driving cycles, both European approval and homologation and customer ones (typically municipal and university). The simulations have provided guidance on the optimal proposed configuration and information on the component to be used

Meta-heuristic algorithms in car engine design: a literature survey

Meta-heuristic algorithms are often inspired by natural phenomena, including the evolution of species in Darwinian natural selection theory, ant behaviors in biology, flock behaviors of some birds, and annealing in metallurgy. Due to their great potential in solving difficult optimization problems, meta-heuristic algorithms have found their way into automobile engine design. There are different optimization problems arising in different areas of car engine management including calibration, control system, fault diagnosis, and modeling. In this paper we review the state-of-the-art applications of different meta-heuristic algorithms in engine management systems. The review covers a wide range of research, including the application of meta-heuristic algorithms in engine calibration, optimizing engine control systems, engine fault diagnosis, and optimizing different parts of engines and modeling. The meta-heuristic algorithms reviewed in this paper include evolutionary algorithms, evolution strategy, evolutionary programming, genetic programming, differential evolution, estimation of distribution algorithm, ant colony optimization, particle swarm optimization, memetic algorithms, and artificial immune system

Automotive Powertrain Control — A Survey

This paper surveys recent and historical publications on automotive powertrain control. Control-oriented models of gasoline and diesel engines and their aftertreatment systems are reviewed, and challenging control problems for conventional engines, hybrid vehicles and fuel cell powertrains are discussed. Fundamentals are revisited and advancements are highlighted. A comprehensive list of references is provided.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/72023/1/j.1934-6093.2006.tb00275.x.pd

CONCEPT EVALUATION AND DEVELOPMENT OF A NOVEL APPROACH FOR INTEGRATION OF TURBOGENERATION, ELECTRIFICATION AND SUPERCHARGING ON HEAVY DUTY ENGINES

While many technologies such as electrically assisted turbocharging, exhaust energy recovery and mild hybridization have already proven to significantly increase heavy-duty engine efficiency, the key challenge to their widespread adoption has been their cost effectiveness and packaging. This research specifically addresses these challenges through evaluation and development of a novel technology concept termed as the Integrated Turbogeneration, Electrification and Supercharging (ITES) system. The concept integrates a secondary compressor, a turbocompound/expander turbine and an electric motor through a planetary gearset into the engine cranktrain. The approach enables a reduced system cost and space-claim, while maximizing the efficiency benefits of independent technologies. First, an assessment of design alternatives for integration of the identified key engine technologies on a heavy-duty engine was conducted. Once the ITES concept was down selected, the research then focused on model-based optimization and evaluation of the ITES system for a downsized medium heavy-duty diesel engine applied in Class 6-7 urban vocational application. As an outcome of the evaluation, a 1D simulation based sizing methodology of ITES system components was proposed. Furthermore, a novel control strategy for the ITES system was developed that combines equivalent consumption based steady-state offline optimization with functional controls for transient operation and smooth mode switching. The offline optimization method was also extended to evaluate the potential of ITES system in increasing aftertreatment temperature, which is critical for meeting future ultra-low NOx emission standards. Lastly, using 1D simulation of validated models, the efficiency benefit of ITES system on engine certification and vehicle drive cycles was predicted for the Class 6-7 urban vocational application. In comparison to baseline engine, the downsized engine with ITES system predicted an 8.5% reduction in engine fuel consumption on HDFTP cycle, 19.3% increase in fuel economy on ARB Transient cycle and 23.7% increase in fuel economy on a real-world drive cycle

In-cylinder pressure resonance analysis for trapped mass estimation in automotive engines

This thesis presents a new application for in-cylinder pressure sensors in internal combustion engines. The new method takes profit of the high-frequency content of the in-cylinder pressure signal to determine the speed of sound evolution during the expansion stroke and combines this estimation with the low-frequency content of the pressure signal and a volume estimation to obtain a measurement of the trapped mass. The new method is based on the studies of the resonance phenomenon in pent-roof combustion chambers and proposes three calibration procedures to determine the resonant frequency evolution when bowl-in-piston geometries are considered. The Fourier transform has been modified in order to include harmonics with frequency variations, which allows a rapid identification of the resonant modes with no need of time-frequency analysis, e.g. STFT or WD. The main limitation of the method resides in the resonance excitation, which may be insufficient in low-load conditions, such as idle. An observer is presented to overcome that problem. The observer takes into account the dynamics of the sensors, the dynamics at the intake manifold, and combines current flow sensors with intermittent measurements, such as the trapped mass obtained by the resonance method, to provide the system with accurate and robust measurements of the trapped mass, the EGR, and the composition at the exhaust. The trapped mass obtained by the resonance method has been compared with auxiliary methods in various experimental facilities: in a SI engine, where no EGR exist, the differences founded were below 1%, in a conventional CI light-duty engine the average of the differences over 808 operating conditions accounted for a 2.64 %, in a research heavy-duty RCCI engine, with EGR, port fuel gasoline, and direct diesel injections, the average difference was 2.17 %, and in a research two-strokes single cylinder engine, where significant short-circuit and residual gases exist, the differences founded were 4.36 %. In all the studied cases the differences founded with the reference estimation can be attributed to the auxiliary method employed and its expected error. In order to demonstrate the potential of the resonance method four applications for control and diagnosis of internal combustion engines have been proposed: the estimation of residuals in engines with NVO, the prediction of knock in SI engines, the estimation of the exhaust gases temperature, and a NOx model for CI engines. In the four applications the method was compared with current methodologies and with additional sensors, demonstrating the improvement in accuracy and a cycle-to-cycle resolution.Esta tesis presenta una nueva aplicación para los sensores de presión en cámara. El nuevo método utiliza el contenido de alta frecuencia de la señal de presión en cámara para estimar la evolución de la velocidad del sonido durante la expansión de los gases de escape y combina esta estimación con el contenido de baja frecuencia de la presión en cámara y el volumen instantáneo de la cámara para obtener una medida de la masa atrapada. El nuevo método está basado en los estudios de la resonancia en cámaras de combustión cilíndricas y propone tres procedimientos de calibración para estimar la evolución de la frecuencia de resonancia en cámaras de combustión con bowl. La transformada de Fourier ha sido modificada para considerar harmónicos con frecuencias que varían en el tiempo, lo que permite una rápida identificación de los modos de resonancia sin necesidad de utilizar un análisis en tiempo frecuencia, como por ejemplo STFT o WD. La principal limitación del método es la necesidad de excitación suficiente de la resonancia, que puede impedir su uso en condiciones de baja carga como el ralentí. Para solventar este problema se ha diseñado un observador. El observador incluye las dinámicas de los sensores, las dinámicas del colector de admisión, y combina los sensores actuales de flujo con medidas intermitentes (como la medida ofrecida por el nuevo método de la resonancia) para obtener medidas de la masa atrapada, del EGR y de la composición en el escape precisas y robustas. La medida de la masa atrapada obtenida por el método de la resonancia ha sido comparado con métodos auxiliares en diferentes instalaciones experimentales: en un motor SI, sin EGR, las diferencias con los sensores eran menores del 1%, en un motor convencional CI la media de las diferencias sobre 808 puntos de operación distintos ha sido de 2.64 %, en un motor de investigación con EGR, con inyección gasolina en el colector e inyección directa de diesel, las diferencias fueron de 2.17 %, y en un motor de investigación de dos tiempos, donde existían grandes cantidades de corto-circuito y gases residuales, las diferencias fueron de 4.36 %. En todos los casos estudiados las diferencias encontradas pueden ser atribuidas a los errores que caracterizan los métodos auxiliares utilizados para obtener la medida de referencia. Finalmente, para demostrar el potencial del método se han desarrollado cuatro aplicaciones para control y diagnóstico de motores de combustión interna alternativos: la estimación de gases residuales en motores con NVO, la predicción de knock en motores SI, la estimación de la temperatura de los gases de escape, y un modelo de NOx para motores CI. En las cuatro aplicaciones el método ha sido comparado con los sistemas de medidas actuales y con sensores adicionales, demostrando mejoras importantes en la precisión de la medida y una resolución de un solo ciclo.Aquesta tesi presenta una nova aplicació per als sensors de pressió en cambra. El nou mètode utilitza el contingut d'alta freqüència del senyal de pressió en cambra per estimar l'evolució de la velocitat del so durant l'expansió dels gasos d'eixida i combina aquesta estimació amb el contingut de baixa freqüència de la pressió en cambra i el volum instantani de la cambra per obtenir una mesura de la massa atrapada. El nou mètode està desenvolupat dels estudis de la ressonància en cambres de combustió cilíndriques i proposa tres procediments de calibratge per estimar l'evolució de la freqüència de ressonància en cambres de combustió amb bowl. La transformada de Fourier ha sigut modificada per considerar harmònics amb freqüències que varien en el temps, el que permet una ràpida identificació dels modes de ressonància sense necessitat d'utilitzar una anàlisi en temps-freqüència, com per exemple la STFT o la WD. La principal limitació del mètode és la necessitat d'excitació suficient de la ressonància, que pot impedir el seu ús en condicions de baixa càrrega, com al ralentí. Per solucionar aquest problema s'ha desenvolupat un observador. L'observador inclou les dinàmiques dels sensors, les dinàmiques del col·lector d'admissió, i combina els sensors actuals de flux amb mesures intermitents (com l'obtinguda pel nou mètode de la ressonància) per obtenir mesures de la massa atrapada, del EGR i de la composició d'eixida precises i robustes. La mesura de la massa atrapada obtinguda pel mètode de la ressonància ha sigut comparada en mètodes auxiliars en diferents instal·lacions experimentals: a un motor SI, sense EGR, les diferencies amb els sensors estaven per davall de l'1 %, a un motor convencional CI la mitja de les diferències sobre 808 punts d'operació diferents ha sigut de 2.64 %, a un motor d'investigació, en EGR, en injecció gasolina en el col·lector i injecció directa de dièsel, les diferències van ser de 2.17 %, i a un motor d'investigació de dos temps, on existien grans quantitats de curtcircuit i residuals, les diferencies foren de 4.36 %. En tots els casos estudiats les diferències trobades poden ser atribuïdes als errors que caracteritzen els mètodes auxiliars utilitzats per obtenir la mesura de referència. Finalment, per demostrar el potencial del mètode s'han desenvolupat quatre aplicacions per al control i diagnòstic de motors de combustió interna alternatius: l'estimació de gasos residuals en motors amb NVO, la predicció de knock en motors SI, l'estimació de la temperatura dels gasos d'eixida, i un model de NOx per a motors CI. En les quatre aplicacions el mètode ha sigut comparat amb els sistemes de mesures actuals i amb sensors addicionals, demostrant millores importants en la precisió de la mesura i una resolució de solament un cicle.Bares Moreno, P. (2017). In-cylinder pressure resonance analysis for trapped mass estimation in automotive engines [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/9042

Powertrain Architectures and Technologies for New Emission and Fuel Consumption Standards

New powertrain design is highly influenced by CO2 and pollutant limits defined by legislations, the demand of fuel economy in for real conditions, high performances and acceptable cost. To reach the requirements coming from both end-users and legislations, several powertrain architectures and engine technologies are possible (e.g. SI or CI engines), with many new technologies, new fuels, and different degree of electrification. The benefits and costs given by the possible architectures and technology mix must be accurately evaluated by means of objective procedures and tools in order to choose among the best alternatives. This work presents a basic design methodology and a comparison at concept level of the main powertrain architectures and technologies that are currently being developed, considering technical benefits and their cost effectiveness. The analysis is carried out on the basis of studies from the technical literature, integrating missing data with evaluations performed by means of powertrain-vehicle simplified models, considering the most important powertrain architectures. Technology pathways for passenger cars up to 2025 and beyond have been defined. After that, with support of more detailed models and experimentations, the investigation has been focused on the more promising technologies to improve internal combustion engine, such as: water injection, low temperature combustions and heat recovery systems

Supervisory control of complex propulsion subsystems

Modern gasoline and diesel combustion engines are equipped with several subsystems with the goal to reduce fuel consumption and pollutant exhaust emissions. Subsystem synergies could be harnessed using the supervisory control approach. Look-ahead information can be used to potentially optimise power-train control for real time implementation. This thesis delves upon modelling the exhaust emissions from a combustion engine and developing a combined equivalent objective metric to propose a supervisory controller that uses look-ahead information with the objective to reduce fuel consumed and exhaust emissions. In the first part of the thesis, the focus is on diesel engine application control for emissions and fuel consumption reduction.\ua0Model of exhaust emissions in a diesel engine obtained from a combination of nominal engine operation and deviations are evaluated for transient drive cycles.\ua0The look ahead information as a trajectory of vehicle speed and load over time is considered.\ua0The supervisory controller considers a discrete control action set over the first segment of the trip ahead.\ua0The cost to optimise is defined and pre-computed off-line for a discrete set of operating conditions.\ua0A full factorial optimisation carried out off-line is stored on board the vehicle and applied in real-time.\ua0In a first proposal, the subsystem control of the after-treatment system comprising the lean NOx trap and the selective reduction catalyst is considered.\ua0As a next iteration, the combustion engine is added to the control problem.\ua0Simulation comparison of the controllers with the baseline controller offers a 1 % total fuel equivalent cost improvement while offering the flexibility to tailor the controller for different cost objective. In the second part of the thesis, the focus is on cold-start emissions control for modern gasoline engines.\ua0Emissions occurring when the engine is started until the catalyst is sufficiently warm, contribute to a significant proportion of tailpipe pollutant emissions.\ua0Electrically heated catalyst (EHC) in the three way catalyst (TWC) is a promising technology to reduce cold-start emissions where the catalyst can be warmed up prior to engine start and continued after start.\ua0A simulation framework for the engine, TWC with EHC with focus on modeling the thermal and chemical interactions during cold-start was developed.\ua0An evaluation framework with a proposed equivalent emissions approach was developed considering the challenges associated with cold-start emission control.\ua0An equivalent emission optimal post-heating time for the EHC is proposed that adapts to information which is available in a real-time on-line implementation.\ua0The proposed controller falls short of just 1 % equivalent emissions compared to the optimal case

MODEL-BASED CONTROL OF HYBRID ELECTRIC POWERTRAINS INTEGRATED WITH LOW TEMPERATURE COMBUSTION ENGINES

Powertrain electrification including hybridizing advanced combustion engines is a viable cost-effective solution to improve fuel economy of vehicles. This will provide opportunity for narrow-range high-efficiency combustion regimes to be able to operate and consequently improve vehicle’s fuel conversion efficiency, compared to conventional hybrid electric vehicles (HEV)s. Low temperature combustion (LTC) engines offer the highest peak brake thermal efficiency reported in literature, but these engines have narrow operating range. In addition, LTC engines have ultra-low soot and nitrogen oxides (NOx) emissions, compared to conventional compression ignition and spark ignition (SI) engines. This dissertation concentrates on integrating the LTC engines (i) in series HEV and extended range electric vehicle (E-REV) architectures which decouple the engine from the drivetrain and allow the ICE to operate fully in a dedicated LTC mode, and (ii) a parallel HEV architecture to investigate optimum performance for fuel saving by utilizing electric torque assist level offered by e-motor. An electrified LTC-SI powertrain test setup is built at Michigan Technological University to develop the powertrain efficiency maps to be used in energy management control (EMC) framework. Three different types of Energy Management Control (EMC) strategies are developed. The EMC strategies encompass thermostatic rule-based control (RBC), offline (i.e., dynamic programing (DP) and pontryagin’s minimum principal (PMP)), and online optimization (i.e., model predictive control (MPC)). The developed EMC strategies are then implemented on experimentally validated HEV powertrain model to investigate the powertrain fuel economy. A dedicated single-mode homogeneous charge compression ignition (HCCI) and reactivity controlled compression ignition (RCCI) engines are integrated with series HEV powertrain. The results show up to 17.7% and 14.2% fuel economy saving of using HCCI and RCCI, respectively in series HEV compared to modern SI engine in the similar architecture. In addition, the MPC results show that sub-optimal fuel economy is achieved by predicting the vehicle speed profile for a time horizon of 70 sec. Furthermore, a multi-mode LTC-SI engine is integrated in both series and parallel HEVs. The developed multi-mode LTC-SI engine enables flexibility in combustion mode-switching over the driving cycle, which helps to improve the overall fuel economy. The engine operation modes include HCCI, RCCI, and SI modes. The powertrain controller is designed to enable switching among different modes, with minimum fuel penalty for transient engine operations. In the parallel HEV architecture, the results for the UDDS driving cycle show the maximum benefit of the multi-mode LTCSI engine is realized in the mild electrification level, where the LTC mode operating time increases dramatically from 5.0% in Plug-in Hybrid Electric Vehicle (PHEV) to 20.5% in mild HEV

THIESEL 2020.Thermo-and Fluid Dynamic Processes in Direct Injection Engines.8th-11th September

'The THIESEL 2020 Conference on Thermo-and Fluid Dynamic Processes in Direct Injection Engines planned in Valencia (Spain) for 8th to 11th September 2020 has been successfully held in a virtual format, due to the COVID19 pandemic. In spite of the very tough environmental demands, combustion engines will probably remain the main propulsion system in transport for the next 20 to 50 years, at least for as long as alternative solutions cannot provide the flexibility expected by customers of the 21st century. But it needs to adapt to the new times, and so research in combustion engines is nowadays mostly focused on the new challenges posed by hybridization and downsizing. The topics presented in the papers of the conference include traditional ones, such as Injection & Sprays, Combustion, but also Alternative Fuels, as well as papers dedicated specifically to CO2 Reduction and Emissions Abatement.Papers stem from the Academic Research sector as well as from the IndustryXandra Marcelle, M.; Desantes Fernández, JM. (2020). THIESEL 2020.Thermo-and Fluid Dynamic Processes in Direct Injection Engines.8th-11th September. Editorial Universitat Politècnica de València. http://hdl.handle.net/10251/150759EDITORIA