Multi-carrier transmission techniques toward flexible and efficient wireless communication systems

制度:新 ; 文部省報告番号:甲2562号 ; 学位の種類:博士(国際情報通信学) ; 授与年月日:2008/3/15 ; 早大学位記番号:新470

MIMO-OFCDM systems with joint iterative detection and optimal power allocation

This paper investigates the orthogonal frequency and code division multiplexing (OFCDM) systems with multiple input multiple output multiplexing (MIMO-OFCDM) and multicode transmission. Combining the iterative detection in the space domain and the hybrid multi-code interference (MDI) cancellation and minimum mean square error (MMSE) detection in the frequency domain, a joint iterative detection is proposed, which enables space and frequency diversity gains to be jointly exploited. Moreover, using a two-dimensional (2-D) averaging channel estimation algorithm, a close form expression is derived for the optimal power allocation between the pilot and all data channels that achieves the best system performance. It is shown that the optimal power ratio mainly depends on the channel estimation algorithm, the number of transmit antennas as well as the number of pilot and data symbols in a packet, but is not sensitive to the changes in signal-to-noise ratio (SNR) and diversity gains. Simulations are conducted to verify the derived optimal power ratio and study the performance of the proposed joint detection algorithm. It is shown that considerable improvement can be obtained when the number of loops in the joint iterative detection increases. Moreover, the system performance is enhanced significantly when the frequency domain spreading factor, N/sub F/, increases. © 2006 IEEE.published_or_final_versio

Constrained Detection for Spatial-Multiplexing Multiple-Input–Multiple-Output Systems

A family of detectors that exploit signal constraints is developed for maximum-likelihood detection for multiple-input–multiple-output (MIMO) systems. Real constrained detectors and decision-feedback detectors are proposed for real constellations by forcing the relaxed solution to be real. A generalized minimum mean square error (GMMSE) and constrained least squares MIMO detectors are also developed for unitary and nonunitary signal constellations. Using these constrained detectors, we propose a new ordering scheme to achieve a tradeoff between interference suppression and noise enhancement. Moreover, to mitigate the inherent error propagation, the decision-feedback MIMO detectors are integrated with signal constraints. The simulation results show that our combined detector achieves a significant performance gain over vertical Bell Laboratories layered space-time (V-BLAST) detection

Optimal power allocation for channel estimation in MIMO-OFCDM systems

This paper investigates the power allocation in orthogonal frequency and code division multiplexing (OFCDM) systems with multiple input multiple output (MEMO) multiplexing (MIMO-OFCDM). Since time-multiplexed pilot channels are employed for channel estimation, the total transmission power should be properly assigned to the pilot and data channels to achieve the best performance. By minimizing the mean square error (MSE) during signal detection, a closed form expression is derived for the optimal power ratio between the pilot and data channels. It is shown that the optimal power ratio is mainly decided by the number of transmit antennas and the number of pilot and data symbols in a packet, while it is not sensitive to other system parameters like signal-to-noise ratio (SNR) and the frequency domain spreading factor. Simulations demonstrate the accuracy of the derived optimal power ratio. © 2008 IEEE.published_or_final_versio

大規模システムLSI設計のための統一的ハードウェア・ソフトウェア協調検証手法

Currently, the complexity of embedded LSI system is growing faster than the productivity of system design. This trend results in a design productivity gap, particularly in tight development time. Since the verification task takes bigger part of development task, it becomes a major challenge in LSI system design. In order to guarantee system reliability and quality of results (QoR), verifying large coverage of system functionality requires huge amount of relevant test cases and various scenario of evaluations. To overcome these problems, verification methodology is evolving toward supporting higher level of design abstraction by employing HW-SW co-verification. In this study, we present a novel approach for verification LSI circuit which is called as unified HW/SW co-verification framework. The study aims to improve design efficiency while maintains implementation consistency in the point of view of system-level performance. The proposed data-driven simulation and flexible interface of HW and SW design become the backbone of verification framework. In order to avoid time consuming, prone error, and iterative design spin-off in a large team, the proposed framework has to support multiple design abstractions. Hence, it can close the loop of design, exploration, optimization, and testing. Furthermore, the proposed methodology is also able to co-operate with system-level simulation in high-level abstraction, which is easy to extend for various applications and enables fast-turn around design modification. These contributions are discussed in chapter 3. In order to show the effectiveness and the use-cases of the proposed verification framework, the evaluation and metrics assessments of Very High Throughput wireless LAN system design are carried out. Two application examples are provided. The first case in chapter 4 is intended for fast verification and design exploration of large circuit. The Maximum Likelihood Detection (MLD) MIMO decoder is considered as Design Under Test (DUT). The second case, as presented in chapter 5, is the evaluation for system-level simulation. The full transceiver system based on IEEE 802.11ac standard is employed as DUT. Experimental results show that the proposed verification approach gives significant improvements of verification time (e.g. up to 10,000 times) over the conventional scheme. The proposed framework is also able to support various schemes of system level evaluations and cross-layer evaluation of wireless system.九州工業大学博士学位論文 学位記番号：情工博甲第328号 学位授与年月日：平成29年6月30日1 Introduction|2 Design and Verification in LSI System Design|3 Unified HW/SW Co-verification Methodology|4 Fast Co-verification and Design Exploration in Complex Circuits|5 Unified System Level Simulator for Very High Throughput Wireless Systems|6 Conclusion and Future Work九州工業大学平成29年

Novel LDPC coding and decoding strategies: design, analysis, and algorithms

In this digital era, modern communication systems play an essential part in nearly every aspect of life, with examples ranging from mobile networks and satellite communications to Internet and data transfer. Unfortunately, all communication systems in a practical setting are noisy, which indicates that we can either improve the physical characteristics of the channel or find a possible systematical solution, i.e. error control coding. The history of error control coding dates back to 1948 when Claude Shannon published his celebrated work “A Mathematical Theory of Communication”, which built a framework for channel coding, source coding and information theory. For the first time, we saw evidence for the existence of channel codes, which enable reliable communication as long as the information rate of the code does not surpass the so-called channel capacity. Nevertheless, in the following 60 years none of the codes have been proven closely to approach the theoretical bound until the arrival of turbo codes and the renaissance of LDPC codes. As a strong contender of turbo codes, the advantages of LDPC codes include parallel implementation of decoding algorithms and, more crucially, graphical construction of codes. However, there are also some drawbacks to LDPC codes, e.g. significant performance degradation due to the presence of short cycles or very high decoding latency. In this thesis, we will focus on the practical realisation of finite-length LDPC codes and devise algorithms to tackle those issues. Firstly, rate-compatible (RC) LDPC codes with short/moderate block lengths are investigated on the basis of optimising the graphical structure of the tanner graph (TG), in order to achieve a variety of code rates (0.1 < R < 0.9) by only using a single encoder-decoder pair. As is widely recognised in the literature, the presence of short cycles considerably reduces the overall performance of LDPC codes which significantly limits their application in communication systems. To reduce the impact of short cycles effectively for different code rates, algorithms for counting short cycles and a graph-related metric called Extrinsic Message Degree (EMD) are applied with the development of the proposed puncturing and extension techniques. A complete set of simulations are carried out to demonstrate that the proposed RC designs can largely minimise the performance loss caused by puncturing or extension. Secondly, at the decoding end, we study novel decoding strategies which compensate for the negative effect of short cycles by reweighting part of the extrinsic messages exchanged between the nodes of a TG. The proposed reweighted belief propagation (BP) algorithms aim to implement efficient decoding, i.e. accurate signal reconstruction and low decoding latency, for LDPC codes via various design methods. A variable factor appearance probability belief propagation (VFAP-BP) algorithm is proposed along with an improved version called a locally-optimized reweighted (LOW)-BP algorithm, both of which can be employed to enhance decoding performance significantly for regular and irregular LDPC codes. More importantly, the optimisation of reweighting parameters only takes place in an offline stage so that no additional computational complexity is required during the real-time decoding process. Lastly, two iterative detection and decoding (IDD) receivers are presented for multiple-input multiple-output (MIMO) systems operating in a spatial multiplexing configuration. QR decomposition (QRD)-type IDD receivers utilise the proposed multiple-feedback (MF)-QRD or variable-M (VM)-QRD detection algorithm with a standard BP decoding algorithm, while knowledge-aided (KA)-type receivers are equipped with a simple soft parallel interference cancellation (PIC) detector and the proposed reweighted BP decoders. In the uncoded scenario, the proposed MF-QRD and VM-QRD algorithms are shown to approach optimal performance, yet require a reduced computational complexity. In the LDPC-coded scenario, simulation results have illustrated that the proposed QRD-type IDD receivers can offer near-optimal performance after a small number of detection/decoding iterations and the proposed KA-type IDD receivers significantly outperform receivers using alternative decoding algorithms, while requiring similar decoding complexity

Avaliação da probabilidade de erro de bit e da eficiência espectral de sistemas celulares MC-CDMA que utilizam detecção multiusuário

Orientador: Celso de AlmeidaTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: Uma técnica que combina múltiplo acesso por divisão de código (CDMA) e multiplexação por divisão de frequências ortogonais (OFDM) foi proposta como uma opção para futuros padrões de comunicações móveis. Esta técnica é conhecida como múltiplo acesso por divisão de código com multiportadoras (MC-CDMA), a qual além de herdar as vantagens das técnicas CDMA e OFDM, também possui uma inerente diversidade em frequência. Apesar de ser uma técnica de múltiplo acesso, MC-CDMA foi tipicamente estudada usando detectores de um único usuário no receptor. Além disso, alguns trabalhos que têm estudado seu desempenho com detectores multi-usuário usam apenas simulações. Ademais, cenários de uma célula são tipicamente considerados, embora sistemas móveis operem em ambientes celulares. Esta dissertação visa complementar parcialmente as pesquisas prévias sobre MC-CDMA. Em geral, este trabalho aborda o desempenho do enlace reverso de sistemas MC-CDMA em termos da taxa de erro de bit (BER) e da eficiência espectral celular. Para isto, um sistema celular que usa os esquemas de reuso de frequências fracionário (FFR) e suave (SFR) é suposto. Entrelaçamento no domínio da frequência é usado no transmissor dos equipamentos dos usuários e, detecção multiusuário e um arranjo de antenas são considerados nos receptores das estações radio base. O transmissor dos equipamentos dos usuários também realiza controle de potência perfeito. Além disso, ruído aditivo Gaussiano branco, perda de percurso e desvanecimento lento e seletivo que segue a distribuição de Rayleigh são considerados no modelo do canal. As contribuições desta dissertação são resumidas a seguir. Expressões fechadas são obtidas para avaliar a BER média de um sistema celular que usa os detectores multiusuário: zero-forcing (ZF), minimum mean square error (MMSE) e maximum likelihood detector (MU-MLD). Adicionalmente, a técnica signal space diversity (SSD) é usada no sistema celular MC-CDMA. Para isto, o MU-MLD precisa ser empregado no receptor da estação radio base. Uma expressão precisa para avaliar a BER média neste cenário é também derivada. Ademais, uma análise assintótica das expressões da BER é feita para se obter mais informações sobre a ordem da diversidade e o comportamento do sistema no regime de alta relação sinal-ruído mais interferência. A complexidade computacional dos detectores multi-usuário também é obtida em termos do número de operações complexas realizadas durante o processo de detecção. Em particular, o MU-MLD é implementado através de um algoritmo de decodificação esférica (SD), a fim de reduzir sua complexidade. Algumas técnicas são fornecidas para reduzir ainda mais a complexidade da SD. Finalmente, uma expressão para avaliar a eficiência espectral celular média do sistema MC-CDMA nos cenários FFR e SFR é obtida. Esta análise é baseada em um algoritmo que calcula os raios de cobertura da célula para cada modulação usada no sistema, assumindo que modulação adaptativa é empregada. Para todos os cenários, modulações BPSK e M-QAM são consideradas. Simulações de Monte Carlo corroboram a precisão da análise matemática apresentadaAbstract: A hybrid technique combining code division multiple access (CDMA) and orthogonal frequency division multiplexing (OFDM) has been proposed as an option for future mobile communication standards. This technique is known as multicarrier code division multiple access (MC-CDMA), which, besides inheriting the advantages of CDMA and OFDM techniques, also possesses an inherent frequency diversity. Despite being a multiple access technique, MC-CDMA has been typically studied employing single-user detectors in the receiver. Moreover, some works that have studied their performance with multiuser detectors have done so far using only simulations. Furthermore, single cell scenarios are typically considered although mobile systems operate in cellular environments. This dissertation aims to partially complement previous research on MC-CDMA. In general, this work addresses the uplink performance of MC-CDMA systems in terms of the bit error rate (BER) and the cellular spectral efficiency. For this, a cellular system employing fractional frequency reuse (FFR) and soft frequency reuse (SFR) schemes is assumed. Frequency domain interleaving is performed in the transmitter into the user equipments and, multiuser detection and an antenna array are considered in the receivers at the base stations. The transmitter into the user equipments also performs perfect power control. Furthermore, additive white Gaussian noise, path-loss and slow frequency-selective Rayleigh fading are considered in the channel model. The contributions of this dissertation are summarized in the following. Closed-form expressions are derived to evaluate the mean BER of MC-CDMA cellular systems using the multiuser detectors: zero-forcing (ZF), minimum mean square error (MMSE) and maximum likelihood detector (MU-MLD). In addition, signal space diversity (SSD) is used in the MC-CDMA cellular system. For this, MU-MLD must be employed in the receiver at the base station. An accurate expression to evaluate the mean BER in this scenario is also derived. Moreover, an asymptotic analysis of the BER expressions is performed to obtain further insights of the diversity order and system behavior at the high signal-to-noise-plus-interference ratio regime. The computational complexity of the multiuser detectors is also obtained in terms of the number of complex operations performed during the detection process. In particular, MU-MLD is implemented via a sphere decoder (SD) algorithm in order to reduce its complexity. Some techniques are provided in order to further reduce the SD complexity. Finally, an expression to evaluate the mean cellular spectral efficiency of the MC-CDMA system in FFR and SFR scenarios is obtained. This analysis is based on an algorithm that calculates the cell coverage radius for each modulation used in the system, assuming that adaptive modulation is employed. For all analyzed scenarios, BPSK and M-QAM modulations are considered. Monte Carlo simulations corroborate the accuracy of the presented mathematical analysisDoutoradoTelecomunicações e TelemáticaDoutor em Engenharia ElétricaCAPE

Performance Enhancement in SU and MU MIMO-OFDM Technique for Wireless Communication: A Review

The consistent demand for higher data rates and need to send giant volumes of data while not compromising the quality of communication has led the development of a new generations of wireless systems. But range and data rate limitations are there in wireless devices. In an attempt to beat these limitations, Multi Input Multi Output (MIMO) systems will be used which also increase diversity and improve the bit error rate (BER) performance of wireless systems. They additionally increase the channel capacity, increase the transmitted data rate through spatial multiplexing, and/or reduce interference from other users. MIMO systems therefore create a promising communication system because of their high transmission rates without additional bandwidth or transmit power and robustness against multipath fading. This paper provides the overview of Multiuser MIMO system. A detailed review on how to increase performance of system and reduce the bit error rate (BER) in different fading environment e.g. Rayleigh fading, Rician fading, Nakagami fading, composite fading

MIMO Systems

In recent years, it was realized that the MIMO communication systems seems to be inevitable in accelerated evolution of high data rates applications due to their potential to dramatically increase the spectral efficiency and simultaneously sending individual information to the corresponding users in wireless systems. This book, intends to provide highlights of the current research topics in the field of MIMO system, to offer a snapshot of the recent advances and major issues faced today by the researchers in the MIMO related areas. The book is written by specialists working in universities and research centers all over the world to cover the fundamental principles and main advanced topics on high data rates wireless communications systems over MIMO channels. Moreover, the book has the advantage of providing a collection of applications that are completely independent and self-contained; thus, the interested reader can choose any chapter and skip to another without losing continuity

Wireless receiver designs: from information theory to VLSI implementation

Receiver design, especially equalizer design, in communications is a major concern in both academia and industry. It is a problem with both theoretical challenges and severe implementation hurdles. While much research has been focused on reducing complexity for optimal or near-optimal schemes, it is still common practice in industry to use simple techniques (such as linear equalization) that are generally significantly inferior. Although digital signal processing (DSP) technologies have been applied to wireless communications to enhance the throughput, the users' demands for more data and higher rate have revealed new challenges. For example, to collect the diversity and combat fading channels, in addition to the transmitter designs that enable the diversity, we also require the receiver to be able to collect the prepared diversity. Most wireless transmissions can be modeled as a linear block transmission system. Given a linear block transmission model assumption, maximum likelihood equalizers (MLEs) or near-ML decoders have been adopted at the receiver to collect diversity which is an important metric for performance, but these decoders exhibit high complexity. To reduce the decoding complexity, low-complexity equalizers, such as linear equalizers (LEs) and decision feedback equalizers (DFEs) are often adopted. These methods, however, may not utilize the diversity enabled by the transmitter and as a result have degraded performance compared to MLEs. In this dissertation, we will present efficient receiver designs that achieve low bit-error-rate (BER), high mutual information, and low decoding complexity. Our approach is to first investigate the error performance and mutual information of existing low-complexity equalizers to reveal the fundamental condition to achieve full diversity with LEs. We show that the fundamental condition for LEs to collect the same (outage) diversity as MLE is that the channels need to be constrained within a certain distance from orthogonality. The orthogonality deficiency (od) is adopted to quantify the distance of channels to orthogonality while other existing metrics are also introduced and compared. To meet the fundamental condition and achieve full diversity, a hybrid equalizer framework is proposed. The performance-complexity trade-off of hybrid equalizers is quantified by deriving the distribution of od. Another approach is to apply lattice reduction (LR) techniques to improve the ``quality' of channel matrices. We present two widely adopted LR methods in wireless communications, the Lenstra-Lenstra-Lovasz (LLL) algorithm [51] and Seysen's algorithm (SA), by providing detailed descriptions and pseudo codes. The properties of output matrices of the LLL algorithm and SA are also quantified. Furthermore, other LR algorithms are also briefly introduced. After introducing LR algorithms, we show how to adopt them into the wireless communication decoding process by presenting LR-aided hard-output detectors and LR-aided soft-output detectors for coded systems, respectively. We also analyze the performance of proposed efficient receivers from the perspective of diversity, mutual information, and complexity. We prove that LR techniques help to restore the diversity of low-complexity equalizers without increasing the complexity significantly. When it comes to practical systems and simulation tool, e.g., MATLAB, only finite bits are adopted to represent numbers. Therefore, we revisit the diversity analysis for finite-bit represented systems. We illustrate that the diversity of MLE for systems with finite-bit representation is determined by the number of non-vanishing eigenvalues. It is also shown that although theoretically LR-aided detectors collect the same diversity as MLE in the real/complex field, it may show different diversity orders when finite-bit representation exists. Finally, the VLSI implementation of the complex LLL algorithms is provided to verify the practicality of our proposed designs.Ph.D.Committee Chair: Ma, Xiaoli; Committee Member: Anderson, David; Committee Member: Barry, John; Committee Member: Chen, Xu-Yan; Committee Member: Kornegay, Kevi