40 research outputs found
Multiple Access in Aerial Networks: From Orthogonal and Non-Orthogonal to Rate-Splitting
Recently, interest on the utilization of unmanned aerial vehicles (UAVs) has
aroused. Specifically, UAVs can be used in cellular networks as aerial users
for delivery, surveillance, rescue search, or as an aerial base station (aBS)
for communication with ground users in remote uncovered areas or in dense
environments requiring prompt high capacity. Aiming to satisfy the high
requirements of wireless aerial networks, several multiple access techniques
have been investigated. In particular, space-division multiple access(SDMA) and
power-domain non-orthogonal multiple access (NOMA) present promising
multiplexing gains for aerial downlink and uplink. Nevertheless, these gains
are limited as they depend on the conditions of the environment. Hence, a
generalized scheme has been recently proposed, called rate-splitting multiple
access (RSMA), which is capable of achieving better spectral efficiency gains
compared to SDMA and NOMA. In this paper, we present a comprehensive survey of
key multiple access technologies adopted for aerial networks, where aBSs are
deployed to serve ground users. Since there have been only sporadic results
reported on the use of RSMA in aerial systems, we aim to extend the discussion
on this topic by modelling and analyzing the weighted sum-rate performance of a
two-user downlink network served by an RSMA-based aBS. Finally, related open
issues and future research directions are exposed.Comment: 16 pages, 6 figures, submitted to IEEE Journa
Holographic MIMO Communications: Theoretical Foundations, Enabling Technologies, and Future Directions
Future wireless systems are envisioned to create an endogenously
holography-capable, intelligent, and programmable radio propagation
environment, that will offer unprecedented capabilities for high spectral and
energy efficiency, low latency, and massive connectivity. A potential and
promising technology for supporting the expected extreme requirements of the
sixth-generation (6G) communication systems is the concept of the holographic
multiple-input multiple-output (HMIMO), which will actualize holographic radios
with reasonable power consumption and fabrication cost. The HMIMO is
facilitated by ultra-thin, extremely large, and nearly continuous surfaces that
incorporate reconfigurable and sub-wavelength-spaced antennas and/or
metamaterials. Such surfaces comprising dense electromagnetic (EM) excited
elements are capable of recording and manipulating impinging fields with utmost
flexibility and precision, as well as with reduced cost and power consumption,
thereby shaping arbitrary-intended EM waves with high energy efficiency. The
powerful EM processing capability of HMIMO opens up the possibility of wireless
communications of holographic imaging level, paving the way for signal
processing techniques realized in the EM-domain, possibly in conjunction with
their digital-domain counterparts. However, in spite of the significant
potential, the studies on HMIMO communications are still at an initial stage,
its fundamental limits remain to be unveiled, and a certain number of critical
technical challenges need to be addressed. In this survey, we present a
comprehensive overview of the latest advances in the HMIMO communications
paradigm, with a special focus on their physical aspects, their theoretical
foundations, as well as the enabling technologies for HMIMO systems. We also
compare the HMIMO with existing multi-antenna technologies, especially the
massive MIMO, present various...Comment: double column, 58 page
SANSA - Hybrid Terrestrial-Satellite Backhaul Network: Scenarios, Use cases, KPIs, Architecture, Network and Physical Layer Techniques
SANSA (Shared Access terrestrial-satellite backhaul Network enabled by Smart Antennas) is a project funded by the EU under the H2020 program. The main aim of SANSA is to boost the performance of mobile wireless backhaul networks in terms of capacity, energy efficiency and resilience against link failure or congestion while easing the deployment in both rural and urban areas and assuring at the same time an efficient use of the spectrum. This paper provides an overview and the first results of the project and, more specifically, it describes the regulatory environment, the State of The Art of mobile backhauling technologies regarding Ka band, the scenarios, the use cases, and the KPIs along with the SANSA architecture, network (NET), and physical (PHY) layer techniques used to enhance wireless backhauling capabilities
Cross-Mixing Hybrid Beamformer for Wideband Apertures
Existing beamforming arrays suffer from the size and cost of the RF front-end and digital back-end components. In this paper, a novel hybrid beamforming configuration for wideband receivers is introduced. The design replaces phase shifters and local oscillators (LO) with cross mixing antenna elements to maximize diversity gain. In this paper, an analytical model of the cross mixing beamformer (CMB) is first presented. Simulations are carried out showing that a maximum diversity gain can be achieved with the CMB approach. Two prototypes were implemented using and element arrays and tested at 2.31 GHz. Measured results show that CMB achieves coherent signal combining and can preserve the phase delay information needed for hybrid beamforming setups
A Review of Indoor Millimeter Wave Device-based Localization and Device-free Sensing Technologies and Applications
The commercial availability of low-cost millimeter wave (mmWave)
communication and radar devices is starting to improve the penetration of such
technologies in consumer markets, paving the way for large-scale and dense
deployments in fifth-generation (5G)-and-beyond as well as 6G networks. At the
same time, pervasive mmWave access will enable device localization and
device-free sensing with unprecedented accuracy, especially with respect to
sub-6 GHz commercial-grade devices. This paper surveys the state of the art in
device-based localization and device-free sensing using mmWave communication
and radar devices, with a focus on indoor deployments. We first overview key
concepts about mmWave signal propagation and system design. Then, we provide a
detailed account of approaches and algorithms for localization and sensing
enabled by mmWaves. We consider several dimensions in our analysis, including
the main objectives, techniques, and performance of each work, whether each
research reached some degree of implementation, and which hardware platforms
were used for this purpose. We conclude by discussing that better algorithms
for consumer-grade devices, data fusion methods for dense deployments, as well
as an educated application of machine learning methods are promising, relevant
and timely research directions.Comment: 43 pages, 13 figures. Accepted in IEEE Communications Surveys &
Tutorials (IEEE COMST
Multiple Access in Aerial Networks : From Orthogonal and Non-Orthogonal to Rate-Splitting
Recently, interest on the utilization of unmanned aerial vehicles (UAVs) has aroused. Specifically, UAVs can be used in cellular networks as aerial users for delivery, surveillance, rescue search, or as an aerial base station (aBS) for communication with ground users in remote uncovered areas or in dense environments requiring prompt high capacity. Aiming to satisfy the high requirements of wireless aerial networks, several multiple access techniques have been investigated. In particular, space-division multiple access (SDMA) and power-domain non-orthogonal multiple access (NOMA) present promising multiplexing gains for aerial downlink and uplink. Nevertheless, these gains are limited as they depend on the conditions of the environment. Hence, a generalized scheme has been recently proposed, called rate-splitting multiple access (RSMA), which is capable of achieving better spectral efficiency gains compared to SDMA and NOMA. In this paper, we present a comprehensive survey of key multiple access technologies adopted for aerial networks, where aBSs are deployed to serve ground users. Since there have been only sporadic results reported on the use of RSMA in aerial systems, we aim to extend the discussion on this topic by modelling and analyzing the weighted sum-rate performance of a two-user network served by an RSMA-based aBS. Finally, related open issues and future research directions are exposed.publishedVersionPeer reviewe