Two-path succussive relaying with hybrid demodulate and forward

This is the author accepted manuscript. The final version is available from IEEE via the DOI in this recordThis paper proposes a novel demodulation-and-forward (DMF) scheme for the two-path succussive relay system. While the two-path relaying avoids the data rate loss that occurs in many one-relay cooperative systems, its performance is severely limited by interrelay interference. In this paper, we propose a hybrid DMF scheme for the two-path relay system so that the relays can switch between direct and differential demodulation modes according to channel conditions. The hybrid DMF scheme not only performs better than existing two-path approaches but is easy to achieve synchronization at the relays as well, which is particularly important as a relay receives signals from both the source and the other relay. The proposed hybrid DMF scheme provides an innovative way to implement the two-path relaying scheme.This work was supported by the Important National Science and Technology Specific Projects of China under Grant 2011ZX03004-005

Relay-Induced Error Propagation Reduction for Decode-and-Forward Cooperative Communications

An attractive hybrid method of mitigating the effects of error propagation that may be imposed by the relay node (RN) on the destination node (DN) is proposed. We selected the most appropriate relay location for achieving a specific target Bit Error Ratio (BER) at the relay and signalled the RN-BER to the DN. The knowledge of this BER was then exploited by the decoder at the destination. Our simulation results show that when the BER at the RN is low, we do not have to activate the RN-BER aided decoder at the DN. However, when the RN-BER is high, significant system performance improvements may be achieved by activating the proposed RN-BER based decoding technique at the DN. For example, a power-reduction of up to about 19dB was recorded at a DN BER of 10-4

Two-path succussive relaying with hybrid demodulate and forward

This paper proposes a novel demodulation-and-forward (DMF) scheme for the two-path succussive relay system. While the two-path relaying avoids the data rate loss that occurs in many one-relay cooperative systems, its performance is severely limited by interrelay interference. In this paper, we propose a hybrid DMF scheme for the two-path relay system so that the relays can switch between direct and differential demodulation modes according to channel conditions. The hybrid DMF scheme not only performs better than existing two-path approaches but is easy to achieve synchronization at the relays as well, which is particularly important as a relay receives signals from both the source and the other relay. The proposed hybrid DMF scheme provides an innovative way to implement the two-path relaying scheme

Diversity, Coding, and Multiplexing Trade-Off of Network-Coded Cooperative Wireless Networks

In this paper, we study the performance of network-coded cooperative diversity systems with practical communication constraints. More specifically, we investigate the interplay between diversity, coding, and multiplexing gain when the relay nodes do not act as dedicated repeaters, which only forward data packets transmitted by the sources, but they attempt to pursue their own interest by forwarding packets which contain a network-coded version of received and their own data. We provide a very accurate analysis of the Average Bit Error Probability (ABEP) for two network topologies with three and four nodes, when practical communication constraints, i.e., erroneous decoding at the relays and fading over all the wireless links, are taken into account. Furthermore, diversity and coding gain are studied, and advantages and disadvantages of cooperation and binary Network Coding (NC) are highlighted. Our results show that the throughput increase introduced by NC is offset by a loss of diversity and coding gain. It is shown that there is neither a coding nor a diversity gain for the source node when the relays forward a network-coded version of received and their own data. Compared to other results available in the literature, the conclusion is that binary NC seems to be more useful when the relay nodes act only on behalf of the source nodes, and do not mix their own packets to the received ones. Analytical derivation and findings are substantiated through extensive Monte Carlo simulations.Comment: IEEE International Conference on Communications (ICC), 2012. Accepted for publication and oral presentatio

Relay Technologies in IEEE 802.16j Mobile Multi-hop Relay (MMR) Networks

IEEE 802.16 standard is created to compete with cable access networks. In the beginning end users are immobile and have a line of sight with base station, now it moved to mobile non line of sight (NLOS) with the new standard IEEE 802.16e and IEEE 802.16j. The new IEEE 802.16j standard which is an amendment to IEEE 802.16e is mobile multi hop relay (MMR) specification for wireless networks. This paper discusses relay modes, relay transmission schemes and relay pairing schemes of IEEE 802.16j. Relay technologies such as transparent relay modes, non transparent relay mode, relay pairing schemes such as centralized relay pairing schemes, distributed relay pairing scheme, characterises of relay based networks such as throughput enhancement, capacity increase, cost reduction , relay techniques such as time domain frequency domain relay techniques and relay placement are also discussed in this paper. The paper also discusses about integration of IEEE 802.16j with IEEE 802.11. Keywords: IEEE 802.16j, Relay pairing schemes, relay techniques, Relay modes, WIMAX, NCTUns, et

Unattended network operations technology assessment study. Technical support for defining advanced satellite systems concepts

The results are summarized of an unattended network operations technology assessment study for the Space Exploration Initiative (SEI). The scope of the work included: (1) identified possible enhancements due to the proposed Mars communications network; (2) identified network operations on Mars; (3) performed a technology assessment of possible supporting technologies based on current and future approaches to network operations; and (4) developed a plan for the testing and development of these technologies. The most important results obtained are as follows: (1) addition of a third Mars Relay Satellite (MRS) and MRS cross link capabilities will enhance the network's fault tolerance capabilities through improved connectivity; (2) network functions can be divided into the six basic ISO network functional groups; (3) distributed artificial intelligence technologies will augment more traditional network management technologies to form the technological infrastructure of a virtually unattended network; and (4) a great effort is required to bring the current network technology levels for manned space communications up to the level needed for an automated fault tolerance Mars communications network

Hybrid turbo FEC/ARQ systems and distributed space-time coding for cooperative transmission

Cooperative transmission can be seen as a "virtual" MIMO system, where the multiple transmit antennas are in fact implemented distributed by the antennas both at the source and the relay terminal. Depending on the system design, diversity/multiplexing gains are achievable. This design involves the definition of the type of retransmission (incremental redundancy, repetition coding), the design of the distributed space-time codes, the error correcting scheme, the operation of the relay (decode&forward or amplify&forward) and the number of antennas at each terminal. Proposed schemes are evaluated in different conditions in combination with forward error correcting codes (FEC), both for linear and near-optimum (sphere decoder) receivers, for its possible implementation in downlink high speed packet services of cellular networks. Results show the benefits of coded cooperation over direct transmission in terms of increased throughput. It is shown that multiplexing gains are observed even if the mobile station features a single antenna, provided that cell wide reuse of the relay radio resource is possible