Relay Switching Aided Turbo Coded Hybrid-ARQ for Correlated Fading Channel

Hybrid-Automatic-Repeat-reQuest (HARQ) has become an indispensable technique in reliable communications systems. However, its performance is inevitably affected by the channel’s fading correlation. In this paper, we proposed a novel relay-switching aided HARQ scheme in order to mitigate the detrimental effects of correlated fading without unduly increasing the system’s complexity and delay. Our results show that the proposed relay-switching regime operates efficiently in correlated channels, hence significantly reduces the error floor of turbo-coded HARQ. Additionally, a HARQ scheme using Segment Selective Repeat (SSR) is incorporated in the relay-switching scheme for achieving further improvements. Quantitatively, the proposed relay-switching aided turbo-coded HARQ scheme using SSR may achieve an approximately 2 dB gain, compared to the conventional amplify-and-forward aided turbo coded HARQ arrangement using Chase Combining. Index Terms - Relay switching, correlated fading channel, Hybrid-ARQ, turbo codes, chase combining, incremental redundancy, selective segment repeat

Turbo Packet Combining for Broadband Space-Time BICM Hybrid-ARQ Systems with Co-Channel Interference

In this paper, efficient turbo packet combining for single carrier (SC) broadband multiple-input--multiple-output (MIMO) hybrid--automatic repeat request (ARQ) transmission with unknown co-channel interference (CCI) is studied. We propose a new frequency domain soft minimum mean square error (MMSE)-based signal level combining technique where received signals and channel frequency responses (CFR)s corresponding to all retransmissions are used to decode the data packet. We provide a recursive implementation algorithm for the introduced scheme, and show that both its computational complexity and memory requirements are quite insensitive to the ARQ delay, i.e., maximum number of ARQ rounds. Furthermore, we analyze the asymptotic performance, and show that under a sum-rank condition on the CCI MIMO ARQ channel, the proposed packet combining scheme is not interference-limited. Simulation results are provided to demonstrate the gains offered by the proposed technique.Comment: 12 pages, 7 figures, and 2 table

Frequency Domain Hybrid-ARQ Chase Combining for Broadband MIMO CDMA Systems

In this paper, we consider high-speed wireless packet access using code division multiple access (CDMA) and multiple-input multiple-output (MIMO). Current wireless standards, such as high speed packet access (HSPA), have adopted multi-code transmission and hybrid-automatic repeat request (ARQ) as major technologies for delivering high data rates. The key technique in hybrid-ARQ, is that erroneous data packets are kept in the receiver to detect/decode retransmitted ones. This strategy is refereed to as packet combining. In CDMA MIMO-based wireless packet access, multi-code transmission suffers from severe performance degradation due to the loss of code orthogonality caused by both interchip interference (ICI) and co-antenna interference (CAI). This limitation results in large transmission delays when an ARQ mechanism is used in the link layer. In this paper, we investigate efficient minimum mean square error (MMSE) frequency domain equalization (FDE)-based iterative (turbo) packet combining for cyclic prefix (CP)-CDMA MIMO with Chase-type ARQ. We introduce two turbo packet combining schemes: i) In the first scheme, namely "chip-level turbo packet combining", MMSE FDE and packet combining are jointly performed at the chip-level. ii) In the second scheme, namely "symbol-level turbo packet combining", chip-level MMSE FDE and despreading are separately carried out for each transmission, then packet combining is performed at the level of the soft demapper. The computational complexity and memory requirements of both techniques are quite insensitive to the ARQ delay, i.e., maximum number of ARQ rounds. The throughput is evaluated for some representative antenna configurations and load factors to show the gains offered by the proposed techniques.Comment: Submitted to IEEE Transactions on Vehicular Technology (Apr 2009

Usage of link-level performance indicators for HSDPA network-level simulations in E-UMTS

The paper describes integration of HSDPA (high-speed downlink packet access) link-level simulation results into network-level simulations for enhanced UMTS. The link-level simulations model all physical layer features depicted in the 3GPP standards. These include: generation of transport blocks; turbo coding; rate matching; spreading; scrambling; modulation. At the receiver side, all complementary blocks are designed, with soft-decision demodulation, and a turbo decoder using the MAP (maximum a posteriori) algorithm with 8 iterations. An analytical formula is defined that fits the CQI (channel quality indicator) dependent BLER (block error rate) versus E/sub b//N/sub 0/ results in an AWGN channel. This formula models the physical layer in the network-level simulator. A further extension for frequency selective fading channels has been defined. The network-level simulator includes propagation models that provide SNR values. Based on these SNR values and the simplified physical layer model, an algorithm selects the CQI, and determines the actual BLER at time of reception. The rounding down and delaying of the CQI reporting, which corresponds to the W-CDMA standard, has a significant impact on throughput and transfer delay of the HS-DSCH. Some compensation can be found in a modified transmission. The integration of the link-level and network-level simulators gives accurate and realistic results that can be used in more studies that focus on network layer aspects of packet based services over HSDP

Using Channel Output Feedback to Increase Throughput in Hybrid-ARQ

Hybrid-ARQ protocols have become common in many packet transmission systems due to their incorporation in various standards. Hybrid-ARQ combines the normal automatic repeat request (ARQ) method with error correction codes to increase reliability and throughput. In this paper, we look at improving upon this performance using feedback information from the receiver, in particular, using a powerful forward error correction (FEC) code in conjunction with a proposed linear feedback code for the Rayleigh block fading channels. The new hybrid-ARQ scheme is initially developed for full received packet feedback in a point-to-point link. It is then extended to various different multiple-antenna scenarios (MISO/MIMO) with varying amounts of packet feedback information. Simulations illustrate gains in throughput.Comment: 30 page