Teaching humanoid robotics by means of human teleoperation through RGB-D sensors

This paper presents a graduate course project on humanoid robotics offered by the University of Padova. The target is to safely lift an object by teleoperating a small humanoid. Students have to map human limbs into robot joints, guarantee the robot stability during the motion, and teleoperate the robot to perform the correct movement. We introduce the following innovative aspects with respect to classical robotic classes: i) the use of humanoid robots as teaching tools; ii) the simplification of the stable locomotion problem by exploiting the potential of teleoperation; iii) the adoption of a Project-Based Learning constructivist approach as teaching methodology. The learning objectives of both course and project are introduced and compared with the students\u2019 background. Design and constraints students have to deal with are reported, together with the amount of time they and their instructors dedicated to solve tasks. A set of evaluation results are provided in order to validate the authors\u2019 purpose, including the students\u2019 personal feedback. A discussion about possible future improvements is reported, hoping to encourage further spread of educational robotics in schools at all levels

Supervised Autonomous Locomotion and Manipulation for Disaster Response with a Centaur-like Robot

Mobile manipulation tasks are one of the key challenges in the field of search and rescue (SAR) robotics requiring robots with flexible locomotion and manipulation abilities. Since the tasks are mostly unknown in advance, the robot has to adapt to a wide variety of terrains and workspaces during a mission. The centaur-like robot Centauro has a hybrid legged-wheeled base and an anthropomorphic upper body to carry out complex tasks in environments too dangerous for humans. Due to its high number of degrees of freedom, controlling the robot with direct teleoperation approaches is challenging and exhausting. Supervised autonomy approaches are promising to increase quality and speed of control while keeping the flexibility to solve unknown tasks. We developed a set of operator assistance functionalities with different levels of autonomy to control the robot for challenging locomotion and manipulation tasks. The integrated system was evaluated in disaster response scenarios and showed promising performance.Comment: In Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Madrid, Spain, October 201

Development and Testing of a Software Framework for Controlling Humanoid Robots in Disaster-Response Scenarios

The aim of this thesis is to design and develop a modular software framework for controlling humanoid robots in teleoperation, in a context of disaster-response or civil defense. Over the years, natural (earthquakes, floods, etc.) or man-made disasters (nuclear reactor meltdowns, terrorist attacks, etc.) have caused several victims. The state of the art of disaster-robotics allows to deploy efficient and powerful robots in order to assist and support humans in the delicate phases of searching and rescuing survivors. In particular, with the use of teleoperation, the inclusion of a human operator (human-in-the-loop) can dramatically promote the application of humanoid robots, due to the human superior competence in critical thinking and context-awareness. This way, robots can be used as an interface between man and environment. Under these concepts, the thesis work focused on the design of a robust and efficient control architecture that brings whole-body locomotion and manipulation capabilities to the robot. Specifically, this thesis dealt with the development of a software module for teleoperating a robot while it is in a vehicle, making it able to drive. The module internal architecture is structured as a Finite State Machine, which allows to model a workflow of behaviors in an event-driven manner, providing safe and robust control in a teleoperation scenario. The effectiveness of the developed software has been validated during the DARPA Robotics Challenge Finals, occured in Pomona, CA (USA), on June 5-6 of 2015

From teleoperation to the cognitive human-robot interface

Robots are slowly moving from factories to mines, construction sites, public places and homes. This new type of robot or robotized working machine – field and service robots (FSR) – should be capable of performing different kinds of tasks in unstructured changing environments, not only among humans but through continuous interaction with humans. The main requirements for an FSR are mobility, advanced perception capabilities, high "intelligence" and easy interaction with humans. Although mobility and perception capabilities are no longer bottlenecks, they can nevertheless still be greatly improved. The main bottlenecks are intelligence and the human - robot interface (HRI). Despite huge efforts in "artificial intelligence" research, the robots and computers are still very "stupid" and there are no major advancements on the horizon. This emphasizes the importance of the HRI. In the subtasks, where high-level cognition or intelligence is needed, the robot has to ask for help from the operator. In addition to task commands and supervision, the HRI has to provide the possibility of exchanging information about the task and environment through continuous dialogue and even methods for direct teleoperation. The thesis describes the development from teleoperation to service robot interfaces and analyses the usability aspects of both teleoperation/telepresence systems and robot interfaces based on high-level cognitive interaction. The analogue in the development of teleoperation interfaces and HRIs is also pointed out. The teleoperation and telepresence interfaces are studied on the basis of a set of experiments in which the different enhancement-level telepresence systems were tested in different tasks of a driving type. The study is concluded by comparing the usability aspects and the feeling of presence in a telepresence system. HRIs are studied with an experimental service robot WorkPartner. Different kinds of direct teleoperation, dialogue and spatial information interfaces are presented and tested. The concepts of cognitive interface and common presence are presented. Finally, the usability aspects of a human service robot interface are discussed and evaluated.reviewe

A modular approach for remote operation of humanoid robots in search and rescue scenarios

In the present work we have designed and implemented a modular, robust and user-friendly Pilot Interface meant to control humanoid robots in rescue scenarios during dangerous missions. We follow the common approach where the robot is semi-autonomous and it is remotely controlled by a human operator. In our implementation, YARP is used both as a communication channel for low-level hardware components and as an interconnecting framework between control modules. The interface features the capability to receive the status of these modules continuously and request actions when required. In addition, ROS is used to retrieve data from different types of sensors and to display relevant information of the robot status such as joint positions, velocities and torques, force/torque measurements and inertial data. Furthermore the operator is immersed into a 3D reconstruction of the environment and is enabled to manipulate 3D virtual objects. The Pilot Interface allows the operator to control the robot at three different levels. The high-level control deals with human-like actions which involve the whole robot’s actuation and perception. For instance, we successfully teleoperated IIT’s COmpliant huMANoid (COMAN) platform to execute complex navigation tasks through the composition of elementary walking commands (e.g.[walk_forward, 1m]). The mid-level control generates tasks in cartesian space, based on the position and orientation of objects of interest (i.e. valve, door handle) w.r.t. a reference frame on the robot. The low level control operates in joint space and is meant as a last resort tool to perform fine adjustments (e.g. release a trapped limb). Finally, our Pilot Interface is adaptable to different tasks, strategies and pilot’s needs, thanks to a modular architecture of the system which enables to add/remove single front-end components (e.g. GUI widgets) as well as back-end control modules on the fly

Graphite immobilisation in glass composite materials

Irradiated graphite is a problematic nuclear waste stream and currently raises significant concern worldwide in identifying its long-term disposal route. This thesis describes the use of glass materials for the immobilisation of irradiated graphite prepared by microwave, conventional and sparks plasma sintering methods. Several potential glass compositions namely iron phosphate, aluminoborosilicate, calcium aluminosilicate, alkali borosilicate and obsidian were considered for the immobilisation of various loadings of graphite simulating irradiated graphite. The properties of the samples produced using different processing methods are compared selectively. An investigation of microwave processing using an iron phosphate glass composition revealed that full reaction of the raw materials and formation of a glass melt occurs with consequent removal of porosity at 8 minutes microwave processing. When graphite is present, iron phosphate crystalline phases are formed with much higher levels of residual porosity of up to 43 % than in the samples prepared using conventional sintering under argon. It is found that graphite reacts with the microwave field when in powder form but this reaction is minimised when the graphite is incorporated into a pellet, and that the graphite also impedes sintering of the glass. Mössbauer spectroscopy indicates that reduction of iron occurs with concomitant graphite oxidation. The production of graphite-glass samples using various powdered glass compositions by conventional sintering method still resulted in high porosity with an average of 6-17 % for graphite loadings of 20-25 wt%. Due to the use of pre-made glasses and controlled sintering parameters, the loss of graphite from the total mass is reduced compared to the microwaved samples; the average mass loss is < 0.8 %. The complication of iron oxidation and reduction is present in all the iron containing base glasses considered and this increases the total porosity of the graphite-glass samples. It is concluded that the presence of iron in the raw materials or base glasses as an encapsulation media for the immobilisation of the irradiated graphite waste is not advisable. The production of glass and graphite-glass samples based calcium aluminosilicate composition by spark plasma sintering method is found highly suitable for the immobilisation of irradiated graphite wastes. The advantages of the method includes short processing time i.e. < 40 minutes, improved sintering transport mechanisms, limited graphite oxidation, low porosity (1-4 %) and acceptable tensile strength (2-7 MPa). The most promising samples prepared using spark plasma sintering method were loaded with 30-50 wt% graphite

Methods to improve the coping capacities of whole-body controllers for humanoid robots

Current applications for humanoid robotics require autonomy in an environment specifically adapted to humans, and safe coexistence with people. Whole-body control is promising in this sense, having shown to successfully achieve locomotion and manipulation tasks. However, robustness remains an issue: whole-body controllers can still hardly cope with unexpected disturbances, with changes in working conditions, or with performing a variety of tasks, without human intervention. In this thesis, we explore how whole-body control approaches can be designed to address these issues. Based on whole-body control, contributions have been developed along three main axes: joint limit avoidance, automatic parameter tuning, and generalizing whole-body motions achieved by a controller. We first establish a whole-body torque-controller for the iCub, based on the stack-of-tasks approach and proposed feedback control laws in SE(3). From there, we develop a novel, theoretically guaranteed joint limit avoidance technique for torque-control, through a parametrization of the feasible joint space. This technique allows the robot to remain compliant, while resisting external perturbations that push joints closer to their limits, as demonstrated with experiments in simulation and with the real robot. Then, we focus on the issue of automatically tuning parameters of the controller, in order to improve its behavior across different situations. We show that our approach for learning task priorities, combining domain randomization and carefully selected fitness functions, allows the successful transfer of results between platforms subjected to different working conditions. Following these results, we then propose a controller which allows for generic, complex whole-body motions through real-time teleoperation. This approach is notably verified on the robot to follow generic movements of the teleoperator while in double support, as well as to follow the teleoperator\u2019s upper-body movements while walking with footsteps adapted from the teleoperator\u2019s footsteps. The approaches proposed in this thesis therefore improve the capability of whole-body controllers to cope with external disturbances, different working conditions and generic whole-body motions