Teleoperating a mobile manipulator and a free-flying camera from a single haptic device

© 2016 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksThe paper presents a novel teleoperation system that allows the simultaneous and continuous command of a ground mobile manipulator and a free flying camera, implemented using an UAV, from which the operator can monitor the task execution in real-time. The proposed decoupled position and orientation workspace mapping allows the teleoperation from a single haptic device with bounded workspace of a complex robot with unbounded workspace. When the operator is reaching the position and orientation boundaries of the haptic workspace, linear and angular velocity components are respectively added to the inputs of the mobile manipulator and the flying camera. A user study on a virtual environment has been conducted to evaluate the performance and the workload on the user before and after proper training. Analysis on the data shows that the system complexity is not an obstacle for an efficient performance. This is a first step towards the implementation of a teleoperation system with a real mobile manipulator and a low-cost quadrotor as the free-flying camera.Accepted versio

A Tread/Limb/Serpentine Hybrid Robot: Toward Hypermobility in Deconstructed Environments

According to the Red Cross, an average of over 600 disasters and 100,000 associated deaths occur annually throughout the world. This frequency of disasters strains an already overburdened disaster response effort. In the first 48 hours of a rescue operation, it is estimated that a responder will get less than three hours of continuous sleep as they need to work at full force to set up the operation and begin work in the field. This leads to sleep deprivation during the most critical time for search and rescue of victims. Therefore, robots are greatly needed as a force multiplier in USAR response to reduce some of the burden and workload placed on the human rescue workers to make for a more efficient and effective response

Common Metrics for Human-Robot Interaction

This paper describes an effort to identify common metrics for task-oriented human-robot interaction (HRI). We begin by discussing the need for a toolkit of HRI metrics. We then describe the framework of our work and identify important biasing factors that must be taken into consideration. Finally, we present suggested common metrics for standardization and a case study. Preparation of a larger, more detailed toolkit is in progress

A comparison of performance on a tele-robotic search task under different conditions of navigation

This study investigated the impact of the design of robotic navigation algorithms on human performance in a searching task. Participants searched for targets in a real-world environment using a tele-robot in the context of an urban search-and-rescue task. Participants were assigned to one of three conditions for the navigation of the tele-robot around the search area: tele-operation or automated navigation using one of two different algorithms. Participants in the left-wall algorithm condition found significantly more targets that were of medium-high difficulty to identify. In addition, participants in the tele-operation condition used two distinctly different approaches to navigate around the search area. This evidence suggests that the development of path planning algorithms needs to be tailored to the operator. The knowledge that there are differences in algorithms from the human perspective provides an additional metric for the robotics community to decide between algorithms that are otherwise equivalent. Acknowledging the effect of differences in these algorithms when making design choices is important for the success of the human-robot partnership

Enhancing Canine Disaster Search

This paper describes canine augmentation technology (CAT) for use in urban search and rescue (USAR). CAT is a WiFi enabled sensor array that is worn by a trained canines deployed in urban disasters. The system includes, but is not limited to, cameras that provide emergency responders with real-time data to remotely monitor, analyze and take action during USAR operations. An analysis is made of the current tools available to USAR workers including rescue robots and canine search teams. From this analysis came the design of CAT-a system that extracts the strengths of each available USAR tool and combines them to compliment each other. Our experiments yield promising results that CAT may provide significant help to rescuers

Adoption of vehicular ad hoc networking protocols by networked robots

This paper focuses on the utilization of wireless networking in the robotics domain. Many researchers have already equipped their robots with wireless communication capabilities, stimulated by the observation that multi-robot systems tend to have several advantages over their single-robot counterparts. Typically, this integration of wireless communication is tackled in a quite pragmatic manner, only a few authors presented novel Robotic Ad Hoc Network (RANET) protocols that were designed specifically with robotic use cases in mind. This is in sharp contrast with the domain of vehicular ad hoc networks (VANET). This observation is the starting point of this paper. If the results of previous efforts focusing on VANET protocols could be reused in the RANET domain, this could lead to rapid progress in the field of networked robots. To investigate this possibility, this paper provides a thorough overview of the related work in the domain of robotic and vehicular ad hoc networks. Based on this information, an exhaustive list of requirements is defined for both types. It is concluded that the most significant difference lies in the fact that VANET protocols are oriented towards low throughput messaging, while RANET protocols have to support high throughput media streaming as well. Although not always with equal importance, all other defined requirements are valid for both protocols. This leads to the conclusion that cross-fertilization between them is an appealing approach for future RANET research. To support such developments, this paper concludes with the definition of an appropriate working plan