Massive MIMO for Internet of Things (IoT) Connectivity

Massive MIMO is considered to be one of the key technologies in the emerging 5G systems, but also a concept applicable to other wireless systems. Exploiting the large number of degrees of freedom (DoFs) of massive MIMO essential for achieving high spectral efficiency, high data rates and extreme spatial multiplexing of densely distributed users. On the one hand, the benefits of applying massive MIMO for broadband communication are well known and there has been a large body of research on designing communication schemes to support high rates. On the other hand, using massive MIMO for Internet-of-Things (IoT) is still a developing topic, as IoT connectivity has requirements and constraints that are significantly different from the broadband connections. In this paper we investigate the applicability of massive MIMO to IoT connectivity. Specifically, we treat the two generic types of IoT connections envisioned in 5G: massive machine-type communication (mMTC) and ultra-reliable low-latency communication (URLLC). This paper fills this important gap by identifying the opportunities and challenges in exploiting massive MIMO for IoT connectivity. We provide insights into the trade-offs that emerge when massive MIMO is applied to mMTC or URLLC and present a number of suitable communication schemes. The discussion continues to the questions of network slicing of the wireless resources and the use of massive MIMO to simultaneously support IoT connections with very heterogeneous requirements. The main conclusion is that massive MIMO can bring benefits to the scenarios with IoT connectivity, but it requires tight integration of the physical-layer techniques with the protocol design.Comment: Submitted for publicatio

TeamUp5G: a multidisciplinary approach to training and research on new RAN techniques for 5G ultra-dense mobile networks

Proceeding of: 12th IEEE/IET International Symposium on Communication Systems, Networks and Digital Signal Processing, (CSNDSP), 20-22, July 2020, (online).This paper presents a summary of the main research directions being followed in TeamUp5G European Training Network, teaming up a new generation of researchers and entrepreneurs ready to address complex engineering problems and innovation to work both at university and industry in the 5G field. This project is focused on new radio access network (RAN) techniques for 5G, considering ultradense mobile networks as a key ingredient of the actual mobile networks and their evolution. Research covers a wide spread of topics from physical layer and medium access control to applications, looking at spectrum sharing and energy efficiency as important features.This work has received funding from the European Union (EU) Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie ETN TeamUp5G, grant agreement No. 813391

On the application of massive mimo systems to machine type communications

This paper evaluates the feasibility of applying massive multiple-input multiple-output (MIMO) to tackle the uplink mixed-service communication problem. Under the assumption of an available physical narrowband shared channel, devised to exclusively consume data traffic from machine type communications (MTC) devices, the capacity (i.e., number of connected devices) of MTC networks and, in turn, that of the whole system, can be increased by clustering such devices and letting each cluster share the same time-frequency physical resource blocks. Following this research line, we study the possibility of employing sub-optimal linear detectors to the problem and present a simple and practical channel estimator that works without the previous knowledge of the large-scale channel coefficients. Our simulation results suggest that the proposed channel estimator performs asymptotically, as well as the MMSE estimator, with respect to the number of antennas and the uplink transmission power. Furthermore, the results also indicate that, as the number of antennas is made progressively larger, the performance of the sub-optimal linear detection methods approaches the perfect interference-cancellation bound. The findings presented in this paper shed light on and motivate for new and exciting research lines toward a better understanding of the use of massive MIMO in MTC networks

Scalable coexistence of eMBB, URLLC and mMTC enabled by non-orthogonal multiple access and network slicing

Abstract. The 5G systems feature three use cases: enhanced Mobile BroadBand (eMBB), massive Machine-Type Communications (mMTC) and Ultra-Reliable and Low-Latency Communications (URLLC). The diverse requirements of the corresponding services in terms of achievable data-rate, number of connected devices, latency and reliability can lead to sub-optimal use of the 5G resources, thus network slicing emerges as a promising alternative that customizes slices of the network specifically designed to meet specific requirements. By employing network slicing, the radio resources can be shared via orthogonal and non-orthogonal schemes. Motivated by the Industrial Internet of Things (IIoT) paradigm where a large number of sensors may require connectivity with stringent requirements of latency and reliability, we propose and evaluate the joint use of network slicing and Non-Orthogonal Multiple Access (NOMA) with Successive Interference Cancellation (SIC) in two different uplink scenarios. In the first scenario, eMBB coexists with URLLC in the same Radio Access Network (RAN) and, in order to improve the number of concurrent URLLC connections to the same base station (BS), they transmit simultaneously and across multiple frequency channels. In the second scenario, eMBB coexists with mMTC and, to provide connectivity to a massive number of devices, the BS has multiple receive antennas. In both cases, we set the reliability requirements for the services and compare the performance of both orthogonal and non-orthogonal network slicing schemes in terms of maximum achievable data rates and connected users. Our results show that, even with overlapping transmissions from multiple devices, network slicing, NOMA and SIC techniques allow us simultaneously satisfy all the heterogeneous requirements of the 5G services

A Survey on Cellular-connected UAVs: Design Challenges, Enabling 5G/B5G Innovations, and Experimental Advancements

As an emerging field of aerial robotics, Unmanned Aerial Vehicles (UAVs) have gained significant research interest within the wireless networking research community. As soon as national legislations allow UAVs to fly autonomously, we will see swarms of UAV populating the sky of our smart cities to accomplish different missions: parcel delivery, infrastructure monitoring, event filming, surveillance, tracking, etc. The UAV ecosystem can benefit from existing 5G/B5G cellular networks, which can be exploited in different ways to enhance UAV communications. Because of the inherent characteristics of UAV pertaining to flexible mobility in 3D space, autonomous operation and intelligent placement, these smart devices cater to wide range of wireless applications and use cases. This work aims at presenting an in-depth exploration of integration synergies between 5G/B5G cellular systems and UAV technology, where the UAV is integrated as a new aerial User Equipment (UE) to existing cellular networks. In this integration, the UAVs perform the role of flying users within cellular coverage, thus they are termed as cellular-connected UAVs (a.k.a. UAV-UE, drone-UE, 5G-connected drone, or aerial user). The main focus of this work is to present an extensive study of integration challenges along with key 5G/B5G technological innovations and ongoing efforts in design prototyping and field trials corroborating cellular-connected UAVs. This study highlights recent progress updates with respect to 3GPP standardization and emphasizes socio-economic concerns that must be accounted before successful adoption of this promising technology. Various open problems paving the path to future research opportunities are also discussed.Comment: 30 pages, 18 figures, 9 tables, 102 references, journal submissio

User Association in 5G Networks: A Survey and an Outlook

26 pages; accepted to appear in IEEE Communications Surveys and Tutorial