Multicontact Motion Retargeting Using Whole-Body Optimization of Full Kinematics and Sequential Force Equilibrium

This article presents a multicontact motion adaptation framework that enables teleoperation of high degree-of-freedom robots, such as quadrupeds and humanoids, for loco-manipulation tasks in multicontact settings. Our proposed algorithms optimize whole-body configurations and formulate the retargeting of multicontact motions as sequential quadratic programming, which is robust and stable near the edges of feasibility constraints. Our framework allows real-time operation of the robot and reduces cognitive load for the operator because infeasible commands are automatically adapted into physically stable and viable motions on the robot. The results in simulations with full dynamics demonstrated the effectiveness of teleoperating different legged robots interactively and generating rich multicontact movements. We evaluated the computational efficiency of the proposed algorithms, and further validated and analyzed multicontact loco-manipulation tasks on humanoid and quadruped robots by reaching, active pushing, and various traversal on uneven terrains

A Generative Human-Robot Motion Retargeting Approach Using a Single RGBD Sensor

The goal of human-robot motion retargeting is to let a robot follow the movements performed by a human subject. Typically in previous approaches, the human poses are precomputed from a human pose tracking system, after which the explicit joint mapping strategies are specified to apply the estimated poses to a target robot. However, there is not any generic mapping strategy that we can use to map the human joint to robots with different kinds of configurations. In this paper, we present a novel motion retargeting approach that combines the human pose estimation and the motion retargeting procedure in a unified generative framework without relying on any explicit mapping. First, a 3D parametric human-robot (HUMROB) model is proposed which has the specific joint and stability configurations as the target robot while its shape conforms the source human subject. The robot configurations, including its skeleton proportions, joint limitations, and DoFs are enforced in the HUMROB model and get preserved during the tracking procedure. Using a single RGBD camera to monitor human pose, we use the raw RGB and depth sequence as input. The HUMROB model is deformed to fit the input point cloud, from which the joint angle of the model is calculated and applied to the target robots for retargeting. In this way, instead of fitted individually for each joint, we will get the joint angle of the robot fitted globally so that the surface of the deformed model is as consistent as possible to the input point cloud. In the end, no explicit or pre-defined joint mapping strategies are needed. To demonstrate its effectiveness for human-robot motion retargeting, the approach is tested under both simulations and on real robots which have a quite different skeleton configurations and joint degree of freedoms (DoFs) as compared with the source human subjects

Methods to improve the coping capacities of whole-body controllers for humanoid robots

Current applications for humanoid robotics require autonomy in an environment specifically adapted to humans, and safe coexistence with people. Whole-body control is promising in this sense, having shown to successfully achieve locomotion and manipulation tasks. However, robustness remains an issue: whole-body controllers can still hardly cope with unexpected disturbances, with changes in working conditions, or with performing a variety of tasks, without human intervention. In this thesis, we explore how whole-body control approaches can be designed to address these issues. Based on whole-body control, contributions have been developed along three main axes: joint limit avoidance, automatic parameter tuning, and generalizing whole-body motions achieved by a controller. We first establish a whole-body torque-controller for the iCub, based on the stack-of-tasks approach and proposed feedback control laws in SE(3). From there, we develop a novel, theoretically guaranteed joint limit avoidance technique for torque-control, through a parametrization of the feasible joint space. This technique allows the robot to remain compliant, while resisting external perturbations that push joints closer to their limits, as demonstrated with experiments in simulation and with the real robot. Then, we focus on the issue of automatically tuning parameters of the controller, in order to improve its behavior across different situations. We show that our approach for learning task priorities, combining domain randomization and carefully selected fitness functions, allows the successful transfer of results between platforms subjected to different working conditions. Following these results, we then propose a controller which allows for generic, complex whole-body motions through real-time teleoperation. This approach is notably verified on the robot to follow generic movements of the teleoperator while in double support, as well as to follow the teleoperator\u2019s upper-body movements while walking with footsteps adapted from the teleoperator\u2019s footsteps. The approaches proposed in this thesis therefore improve the capability of whole-body controllers to cope with external disturbances, different working conditions and generic whole-body motions

HumanMimic: Learning Natural Locomotion and Transitions for Humanoid Robot via Wasserstein Adversarial Imitation

Transferring human motion skills to humanoid robots remains a significant challenge. In this study, we introduce a Wasserstein adversarial imitation learning system, allowing humanoid robots to replicate natural whole-body locomotion patterns and execute seamless transitions by mimicking human motions. First, we present a unified primitive-skeleton motion retargeting to mitigate morphological differences between arbitrary human demonstrators and humanoid robots. An adversarial critic component is integrated with Reinforcement Learning (RL) to guide the control policy to produce behaviors aligned with the data distribution of mixed reference motions. Additionally, we employ a specific Integral Probabilistic Metric (IPM), namely the Wasserstein-1 distance with a novel soft boundary constraint to stabilize the training process and prevent model collapse. Our system is evaluated on a full-sized humanoid JAXON in the simulator. The resulting control policy demonstrates a wide range of locomotion patterns, including standing, push-recovery, squat walking, human-like straight-leg walking, and dynamic running. Notably, even in the absence of transition motions in the demonstration dataset, robots showcase an emerging ability to transit naturally between distinct locomotion patterns as desired speed changes

Generating Humanoid Multi-Contact through Feasibility Visualization

We present a feasibility-driven teleoperation framework designed to generate humanoid multi-contact maneuvers for use in unstructured environments. Our framework is designed for motions with arbitrary contact modes and postures. The operator configures a pre-execution preview robot through contact points and kinematic tasks. A fast estimation of the preview robot's quasi-static feasibility is performed by checking contact stability and collisions along an interpolated trajectory. A visualization of Center of Mass (CoM) stability margin, based on friction and actuation constraints, is displayed and can be previewed if the operator chooses to add or remove contacts. Contact points can be placed anywhere on a mesh approximation of the robot surface, enabling motions with knee or forearm contacts. We demonstrate our approach in simulation and hardware on a NASA Valkyrie humanoid, focusing on multi-contact trajectories which are challenging to generate autonomously or through alternative teleoperation approaches

Télé-opération Corps Complet de Robots Humanoïdes

This thesis aims to investigate systems and tools for teleoperating a humanoid robot. Robotteleoperation is crucial to send and control robots in environments that are dangerous or inaccessiblefor humans (e.g., disaster response scenarios, contaminated environments, or extraterrestrialsites). The term teleoperation most commonly refers to direct and continuous control of a robot.In this case, the human operator guides the motion of the robot with her/his own physical motionor through some physical input device. One of the main challenges is to control the robot in a waythat guarantees its dynamical balance while trying to follow the human references. In addition,the human operator needs some feedback about the state of the robot and its work site through remotesensors in order to comprehend the situation or feel physically present at the site, producingeffective robot behaviors. Complications arise when the communication network is non-ideal. Inthis case the commands from human to robot together with the feedback from robot to human canbe delayed. These delays can be very disturbing for the human operator, who cannot teleoperatetheir robot avatar in an effective way.Another crucial point to consider when setting up a teleoperation system is the large numberof parameters that have to be tuned to effectively control the teleoperated robots. Machinelearning approaches and stochastic optimizers can be used to automate the learning of some of theparameters.In this thesis, we proposed a teleoperation system that has been tested on the humanoid robotiCub. We used an inertial-technology-based motion capture suit as input device to control thehumanoid and a virtual reality headset connected to the robot cameras to get some visual feedback.We first translated the human movements into equivalent robot ones by developping a motionretargeting approach that achieves human-likeness while trying to ensure the feasibility of thetransferred motion. We then implemented a whole-body controller to enable the robot to trackthe retargeted human motion. The controller has been later optimized in simulation to achieve agood tracking of the whole-body reference movements, by recurring to a multi-objective stochasticoptimizer, which allowed us to find robust solutions working on the real robot in few trials.To teleoperate walking motions, we implemented a higher-level teleoperation mode in whichthe user can use a joystick to send reference commands to the robot. We integrated this setting inthe teleoperation system, which allows the user to switch between the two different modes.A major problem preventing the deployment of such systems in real applications is the presenceof communication delays between the human input and the feedback from the robot: evena few hundred milliseconds of delay can irremediably disturb the operator, let alone a few seconds.To overcome these delays, we introduced a system in which a humanoid robot executescommands before it actually receives them, so that the visual feedback appears to be synchronizedto the operator, whereas the robot executed the commands in the past. To do so, the robot continuouslypredicts future commands by querying a machine learning model that is trained on pasttrajectories and conditioned on the last received commands.Cette thèse vise à étudier des systèmes et des outils pour la télé-opération d’un robot humanoïde.La téléopération de robots est cruciale pour envoyer et contrôler les robots dans des environnementsdangereux ou inaccessibles pour les humains (par exemple, des scénarios d’interventionen cas de catastrophe, des environnements contaminés ou des sites extraterrestres). Le terme téléopérationdésigne le plus souvent le contrôle direct et continu d’un robot. Dans ce cas, l’opérateurhumain guide le mouvement du robot avec son propre mouvement physique ou via un dispositifde contrôle. L’un des principaux défis est de contrôler le robot de manière à garantir son équilibredynamique tout en essayant de suivre les références humaines. De plus, l’opérateur humain abesoin d’un retour d’information sur l’état du robot et de son site via des capteurs à distance afind’appréhender la situation ou de se sentir physiquement présent sur le site, produisant des comportementsde robot efficaces. Des complications surviennent lorsque le réseau de communicationn’est pas idéal. Dans ce cas, les commandes de l’homme au robot ainsi que la rétroaction du robotà l’homme peuvent être retardées. Ces délais peuvent être très gênants pour l’opérateur humain,qui ne peut pas télé-opérer efficacement son avatar robotique.Un autre point crucial à considérer lors de la mise en place d’un système de télé-opérationest le grand nombre de paramètres qui doivent être réglés pour contrôler efficacement les robotstélé-opérés. Des approches d’apprentissage automatique et des optimiseurs stochastiques peuventêtre utilisés pour automatiser l’apprentissage de certains paramètres.Dans cette thèse, nous avons proposé un système de télé-opération qui a été testé sur le robothumanoïde iCub. Nous avons utilisé une combinaison de capture de mouvement basée sur latechnologie inertielle comme périphérique de contrôle pour l’humanoïde et un casque de réalitévirtuelle connecté aux caméras du robot pour obtenir un retour visuel. Nous avons d’abord traduitles mouvements humains en mouvements robotiques équivalents en développant une approchede retargeting de mouvement qui atteint la ressemblance humaine tout en essayant d’assurer lafaisabilité du mouvement transféré. Nous avons ensuite implémenté un contrôleur du corps entierpour permettre au robot de suivre le mouvement humain reciblé. Le contrôleur a ensuite étéoptimisé en simulation pour obtenir un bon suivi des mouvements de référence du corps entier,en recourant à un optimiseur stochastique multi-objectifs, ce qui nous a permis de trouver dessolutions robustes fonctionnant sur le robot réel en quelques essais.Pour télé-opérer les mouvements de marche, nous avons implémenté un mode de télé-opérationde niveau supérieur dans lequel l’utilisateur peut utiliser un joystick pour envoyer des commandesde référence au robot. Nous avons intégré ce paramètre dans le système de télé-opération, ce quipermet à l’utilisateur de basculer entre les deux modes différents.Un problème majeur empêchant le déploiement de tels systèmes dans des applications réellesest la présence de retards de communication entre l’entrée humaine et le retour du robot: mêmequelques centaines de millisecondes de retard peuvent irrémédiablement perturber l’opérateur,encore plus quelques secondes. Pour surmonter ces retards, nous avons introduit un système danslequel un robot humanoïde exécute des commandes avant de les recevoir, de sorte que le retourvisuel semble être synchronisé avec l’opérateur, alors que le robot exécutait les commandes dansle passé. Pour ce faire, le robot prédit en permanence les commandes futures en interrogeant unmodèle d’apprentissage automatique formé sur les trajectoires passées et conditionné aux dernièrescommandes reçues

Tasks prioritization for whole-body realtime imitation of human motion by humanoid robots

International audienceThis paper deals with on-line motion imitation of a human being by a humanoid robot using inverse kinematics (IK). First, the human observed trajectories are scaled in order to match the robot geometric and kinematic description. Second, a task prioritization process is defined using both equality and minimized constraints in the robot IK model, with four tasks: balance management, end-effectors tracking, joint limits avoidance and staying close to the human joint trajectories. The method was validated using the humanoid robot NAO