Velocity constrained trajectory generation for a collinear Mecanum wheeled robot

While much research has been conducted into the generation of smooth trajectories for underactuated unstable aerial vehicles such as quadrotors, less attention has been paid to the application of the same techniques to ground based omnidirectional dynamically balancing robots. These systems have more control authority over their linear accelerations than aerial vehicles, meaning trajectory smoothness is less of a critical design parameter. However, when operating in indoor environments these systems must often adhere to relatively low velocity constraints, resulting in very conservative trajectories when enforced using existing trajectory optimisation methods. This paper makes two contributions; this gap is bridged by the extension of these existing methods to create a fast velocity constrained trajectory planner, with trajectory timing characteristics derived from the optimal minimum-time solution of a simplified acceleration and velocity constrained model. Next, a differentially flat model of an omnidirectional balancing robot utilizing a collinear Mecanum drive is derived, which is used to allow an experimental prototype of this configuration to smoothly follow these velocity constrained trajectories

Exploration of a hybrid locomotion robot

In this work, a hybrid locomotion robotic platform is evaluated. This system combines the benefits of both rolling and walking, with the intent on having the ability to traverse variable terrain. A quadruped leg-wheeled robot was designed, built, and tested. Experimental trials were conducted to demonstrate the overall feasibility of the design. Finally, important conclusions about the effectiveness and value of hybrid locomotion were reached. Posturecontrol is specifically identified as an effective area with great potential

Modeling, Analysis, and Control of a Mobile Robot for \u3ci\u3eIn Vivo\u3c/i\u3e Fluoroscopy of Human Joints during Natural Movements

In this dissertation, the modeling, analysis and control of a multi-degree of freedom (mdof) robotic fluoroscope was investigated. A prototype robotic fluoroscope exists, and consists of a 3 dof mobile platform with two 2 dof Cartesian manipulators mounted symmetrically on opposite sides of the platform. One Cartesian manipulator positions the x-ray generator and the other Cartesian manipulator positions the x-ray imaging device. The robotic fluoroscope is used to x-ray skeletal joints of interest of human subjects performing natural movement activities. In order to collect the data, the Cartesian manipulators must keep the x-ray generation and imaging devices accurately aligned while dynamically tracking the desired skeletal joint of interest. In addition to the joint tracking, this also requires the robotic platform to move along with the subject, allowing the manipulators to operate within their ranges of motion. A comprehensive dynamic model of the robotic fluoroscope prototype was created, incorporating the dynamic coupling of the system. Empirical data collected from an RGB-D camera were used to create a human kinematic model that can be used to simulate the joint of interest target dynamics. This model was incorporated into a computer simulation that was validated by comparing the simulation results with actual prototype experiments using the same human kinematic model inputs. The computer simulation was used in a comprehensive dynamic analysis of the prototype and in the development and evaluation of sensing, control, and signal processing approaches that optimize the subject and joint tracking performance characteristics. The modeling and simulation results were used to develop real-time control strategies, including decoupling techniques that reduce tracking error on the prototype. For a normal walking activity, the joint tracking error was less than 20 mm, and the subject tracking error was less than 140 mm

A neural network-based exploratory learning and motor planning system for co-robots

Collaborative robots, or co-robots, are semi-autonomous robotic agents designed to work alongside humans in shared workspaces. To be effective, co-robots require the ability to respond and adapt to dynamic scenarios encountered in natural environments. One way to achieve this is through exploratory learning, or "learning by doing," an unsupervised method in which co-robots are able to build an internal model for motor planning and coordination based on real-time sensory inputs. In this paper, we present an adaptive neural network-based system for co-robot control that employs exploratory learning to achieve the coordinated motor planning needed to navigate toward, reach for, and grasp distant objects. To validate this system we used the 11-degrees-of-freedom RoPro Calliope mobile robot. Through motor babbling of its wheels and arm, the Calliope learned how to relate visual and proprioceptive information to achieve hand-eye-body coordination. By continually evaluating sensory inputs and externally provided goal directives, the Calliope was then able to autonomously select the appropriate wheel and joint velocities needed to perform its assigned task, such as following a moving target or retrieving an indicated object