258 research outputs found
Scaling up MIMO: Opportunities and Challenges with Very Large Arrays
This paper surveys recent advances in the area of very large MIMO systems.
With very large MIMO, we think of systems that use antenna arrays with an
order of magnitude more elements than in systems being built today, say a
hundred antennas or more. Very large MIMO entails an unprecedented number of
antennas simultaneously serving a much smaller number of terminals. The
disparity in number emerges as a desirable operating condition and a practical
one as well. The number of terminals that can be simultaneously served is
limited, not by the number of antennas, but rather by our inability to acquire
channel-state information for an unlimited number of terminals. Larger numbers
of terminals can always be accommodated by combining very large MIMO technology
with conventional time- and frequency-division multiplexing via OFDM. Very
large MIMO arrays is a new research field both in communication theory,
propagation, and electronics and represents a paradigm shift in the way of
thinking both with regards to theory, systems and implementation. The ultimate
vision of very large MIMO systems is that the antenna array would consist of
small active antenna units, plugged into an (optical) fieldbus.Comment: Accepted for publication in the IEEE Signal Processing Magazine,
October 201
User Selection and Precoding Techniques for Rate Maximization in Broadcast MISO Systems
Resumo indisponÃvel
Multiuser non coherent massive MIMO schemes based on DPSK for future communication systems
The explosive usage of rich multimedia content in wireless devices has overloaded the
communication networks. Moreover, the fifth generation (5G) of wireless communications
involves new requirements in the radio access network (RAN) which require higher network
capacities and new capabilities such as ultra-reliable and low-latency communication
(URLLC), vehicular communications or augmented reality. All this has encouraged a remarkable
spectrum crisis in the RF bands. A need for searching alternative techniques
with more spectral efficiency to accommodate the needs of future emerging wireless communications
is emerging. In this context, massive MIMO (m-MIMO) systems have been
proposed as a promising solution for providing a substantial increase in the network capacity,
becoming one of the key enabling technologies for 5G and beyond. m-MIMO
provides high spectral- and energy-efficiency thanks to the deployment of a large number
of antennas at the BS. However, we have to take into account that the current communication
technologies are based on coherent transmission techniques so far, which require
the transmission of a huge amount of signaling. This drawback is escalating with the
excessive available number of antennas in m-MIMO. Therefore, the differential encoding
and non coherent (NC) detection are an alternative solution to circumvent the drawbacks
of m-MIMO in coherent systems. This Ph.D. Thesis is focused on signal processing
techniques for NC detection in conjunction with m-MIMO, proposing new constellation
designs and NC detection algorithms, where the information is transmitted in the signal
differential phase.
First, we design new constellation schemes for an uplink multiuser NC m-MIMO system
in Rayleigh fading channels. These designs allow us to separate the users' signals
at the receiver thanks to a one-to-one correspondence between the constellation for each
user and the received joint constellation. Two approaches are considered in terms of BER:
each user achieves a different performance and, on the other hand, the same performance
is provided for all users. We analyze the number of antennas needed for those designs
and compare to the required number by other designs in the literature. It is shown that
our designs based on DPSK require a lower number of antennas than that required by
their counterpart schemes based on energy. In addition, we compare the performance to
their coherent counterpart systems, resulting NC-m-MIMO based on DPSK capable of
outperforming the coherent systems with the suitable designs.
Second, in order to reduce the number of antennas required for a target performance
we propose a multi-user bit interleaved coded modulation - iterative decoding (BICM-ID) scheme as channel coding for a NC-m-MIMO system based on DPSK. We propose a novel
NC approach for calculating EXIT curves based on the number of antennas. Then using
the EXIT chart we find the best channel coding scheme for our NC-m-MIMO proposal.
We show that the number of users served by the BS can be increased with a 70% reduction
in the number of antennas with respect to the case without channel coding. In particular,
we show that with 100 antennas for error protection equal design for all users and a coding
rate of 1/2 we achieve the minimum probability of error.
Third, we consider that current scenarios such as backhaul wireless systems, rural
or suburban environments, and even new device-to-device (D2D) communications or the
communications in higher frequencies (millimeter and the emerging ones in terahertz frequencies)
can have a predominant line-of-sight (LOS) component, modeled by Rician
fading. For all these new possible scenarios in 5G, we analyze the behavior of the NC
m-MIMO systems when we have a Rician fading. We present a new constellation design
to overcome the problem of the LOS channel component, as well as an associated detection
algorithm to separate each user in reception taking into account the characterization
of the constellation. In addition, for contemplating a more realistic scenario, we propose
grouping users which experience a Rayleigh fading with those with Rician fading, analyzing
the SINR and the performance of such combination in a multi-user NC m-MIMO
system based on M-DPSK. The adequate user grouping allows unifying the constellation
for both groups of users and the detection algorithm, reducing the complexity of the
receiver. Also, the number of users that may be multiplexed may be further increased
thanks to the improved performance.
In the fourth part of this Thesis, we analyse the performance of multi-user NC m-
MIMO based on DPSK in real environments and practical channels defined for the current
standards such as LTE, the future technologies such as 5G and even for communications
in the terahertz band. For this purpose, we use a metric to model the time-varying characteristics
of the practical channels. We employ again the EXIT charts tool for analyzing
and designing iteratively decoded systems. This analysis allows us to obtain an estimate
of the degradation of the system's performance imposed by realistic channels. Hence, we
show that our proposed system is robust to temporal variations, thus it is more recommendable
the employment of NC-m-MIMO-DPSK in the future communication standards
such as 5G. In order to reduce he number of hardware resources required in terms of RF
chains, facilitating its implementation in a real system, we propose incorporating differential
spatial modulation (DSM). We present and analyze a novel multiuser scheme for
NC-m-MIMO combined with DSM with which we can see that the number of antennas
is not a
affected by the incorporation of DSM, even we have an improvement on the
performance with respect to the coherent case.
Finally, we study the viability of multiplexing users by constellation schemes against
classical multiplexing techniques such as time division multiple access (TDMA). In order
to fully characterize the system performance we analyze the block error rate (BLER)
and the throughput of a NC-m-MIMO system. The results show a significant advantage
regarding the number of antennas for multiplexing in the constellation against TDMA.
However, in some cases, the demodulation of multiple users in constellation could require
an excessively large number of antennas compared to TDMA. Therefore, it is necessary to
properly manage the tradeoff
between throughout and the number of antennas, to reach
an optimal operational point, as shown in this Thesis.El inmenso uso de contenido multimedia en los dispositivos inalámbricos ha sobrecargado
las redes de comunicaciones. Además, la quinta generación (5G) de sistemas de
comunicaciones demanda nuevos requisitos para la red de acceso radio, la cual requiere
ofrecer capacidades de red mayores y nuevas funcionalidades como comunicaciones ultra
fiables y con muy poca letancia (URLLC), comunicaciones vehiculares o aplicaciones
como la realidad aumentada. Todo esto ha propiciado una crisis notable en el espectro
electromagnético, lo que ha llevado a una necesidad por buscar técnicas alternativas con
más eficiencia espectral para acomodar todos los requisitos de las tecnologÃas de comunicaciones
emergentes y futuras. En este contexto, los sistemas multi antena masivos,
conocidos como massive MIMO, m-MIMO, han sido propuestos como una solución prometedora
que proporciona un incremento substancial de la capacidad de red, convirtiéndose
en una de las tecnologÃas claves para el 5G. Los sistemas m-MIMO elevan enormemente el
número de antenas en la estación base, lo que les permite ofrecer alta eficiencia espectral
y energética. No obstante, tenemos que tener en cuenta que las actuales tecnologÃas de comunicaciones
emplean técnicas coherentes, las cuales requieren de información del estado
del canal y por ello la transmisión de una enorme cantidad de información de señalización.
Este inconveniente se ve agravado en el caso del m-MIMO debido al enorme número de
antenas. Por ello, la codificación diferencial y la detección no coherente (NC) son una
solución alternativa para solventar el problema de m-MIMO en los sistemas coherentes.
Esta Tesis se centra en las técnicas de procesado de señal para detección NC junto con
m-MIMO, proponiendo nuevos esquemas de constelación y algoritmos de detección NC,
donde la información sea transmitida en la diferencia de fase de la señal.
Primero, diseñamos nuevas constelaciones para un sistema multi usuario NC en m-
MIMO en enlace ascendente (uplink) en canales con desvanecimiento tipo Rayleigh. Estos
diseños nos permiten separar las señales de los usuarios en el receptor gracias a la correspondencia
unÃvoca entre la constelación de cada usuario individual y la constelación
conjunta recibida en la estación base. Hemos considerado dos enfoques para el diseño en
términos de probabilidad de error: cada usuario consigue un rendimiento distinto, mientras
que por otro lado, todos los usuarios son capaces de recibir las mismas prestaciones
de probabilidad de error. Analizamos el número de antenas necesario para estos diseños y
comparamos con el número requerido por otros diseños propuestos en la literatura. Nuestro
diseño basado en DPSK requiere un número menor de antenas comparado con los
sistemas basados en detección de energÃa. También comparamos con su homólogo coherente, resultando que NC-m-MIMO basado en DPSK es capaz de superar a los sistemas
coherentes con los diseños adecuados.
En segundo lugar, para reducir el número de antenas requerido para un rendimiento
dado, proponemos incluir un esquema de codificación de canal. Hemos optado por un
esquema de modulación codificado por bit entrelazado y decodificación iterativa (BICMID).
Hemos empleado la herramienta EXIT chart para el diseño de la codificación de canal,
proponiendo un nuevo enfoque para calcular las curvas EXIT de forma NC y basadas en
el número de antenas. Los resultados muestran que el número de usuarios servidos por
la estación base puede ser incrementado reduciendo un 70% el número de antenas con
respecto al caso sin codificación de canal. En particular, para un array de 100 antenas
y un diseño que ofrezca iguales prestaciones a todos los usuarios, con un código de tasa
1=2, podemos conseguir la mÃnima probabilidad de error.
En tercer lugar, consideramos escenarios donde el canal tenga una componente predominante
de visión directa (LOS) con la estación base modelada mediante un desvanecimiento
tipo Rician. Por ejemplo, sistemas inalámbricos de backhaul, entornos rurales
o sub urbanos, comunicaciones entre dispositivos (D2D), también cuando nos movemos
hacia frecuencias superiores como son en la banda de milimétricas o más recientemente,
la banda de terahercios para buscar mayores anchos de banda. Todos estos escenarios
están contemplados en el futuro 5G. Los diseños presentados para canales Rayleigh ya no
son válidos debido a la componente LOS del canal, por ello presentamos un nuevo diseño de constelación que resuelve el problema de la componente LOS, asà como una guÃa para
diseñar nuevas constelaciones. También proponemos un algoritmo asociado al diseñno de
la constelación para poder separar a los usuarios en recepción. Además, para contemplar
un escenario más realista donde podamos encontrar tanto desvanecimiento Rayleigh como
Rice, proponemos agrupar usuarios de ambos grupos, analizando su rendimiento y relación
señal a interferencia en la combinación. El adecuado agrupamiento permite unificar el
diseño de la constelación para ambos desvanecimientos y por tanto reducir la complejidad
en el receptor. También, el número de usuarios multiplicados en la constelación podrÃa
ser incrementado, gracias a la mejora en el rendimiento.
El cuarto módulo de esta tesis es dedicado a analizar el rendimiento de los diseños
propuestos en presencia de canales reales, donde disponemos de variabilidad temporal y en
frecuencia. Proponemos usar una métrica que modela las caracterÃsticas de la variabilidad
temporal y, usando de nuevo la herramienta EXIT, analizamos los sistemas decodificados
iterativamente considerando ahora los parámetros prácticos del canal. Este análisis nos
permite obtener una estimación de la degradación que sufre el rendimiento del sistema
impuesto por canales reales. Los resultados muestran que los sistemas NC-m-MIMO basados
en DPSK son muy robustos a la variabilidad temporal por lo que son recomendables
para los nuevos escenarios propuestos por el 5G, donde el canal cambia rápidamente.
Otra consideración para introducir los sistemas NC con m-MIMO es la problemática
de necesitar muchas cadenas de radio frecuencia que llevarÃan a tamaños de dispositivos
enormes. Para reducir este número se propone la modulación espacial. En esta Tesis,
estudiamos su uso con los sistemas NC, proponiendo una solución de modulación espacial
diferencial para esquemas con múltiples usuarios combinado con NC-m-MIMO.
Finalmente, estudiamos la viabilidad de multiplexar usuarios en la constelación frente
a usar técnicas clásicas de multiplexación como TDMA. Para caracterizar completamente
el rendimiento del sistema, analizamos la tasa de error de bloque (BLER) y el throughput
de un sistema NC-m-MIMO. Los resultados muestran una ventaja significativa en cuanto
al número de antennas para multiplexar usuarios en la constelación frente al requerido
por TDMA. No obstante, en algunos casos, la demodulación de múltiples usuarios en
la constelación podrÃa requerir un número de antennas excesivamente grande comparado
con la multiplexación en el tiempo. Por ello, es necesario gestionar adecuadamente un
balance entre el throughput y el número de antenas para alcanzar un punto operacional
óptimo, como se muestra en esta Tesis.Programa Oficial de Doctorado en Multimedia y Comunicaciones por la Universidad Carlos III de Madrid y la Universidad Rey Juan CarlosPresidente: Ana Isabel Pérez Neira.- Secretario: Máximo Morales Céspedes.- Vocal: MarÃa del Carmen Aguayo Torre
Novel transmission and beamforming strategies for multiuser MIMO with various CSIT types
In multiuser multi-antenna wireless systems, the transmission and beamforming strategies that achieve the sum rate capacity depend critically on the acquisition of perfect Channel State Information at the Transmitter (CSIT).
Accordingly, a high-rate low-latency feedback link between the receiver and the transmitter is required to keep the latter accurately and instantaneously informed about the CSI.
In realistic wireless systems, however, only imperfect CSIT is achievable due to pilot contamination, estimation error, limited feedback and delay, etc.
As an intermediate solution, this thesis investigates novel transmission strategies suitable for various imperfect CSIT scenarios and the associated beamforming techniques to optimise the rate performance.
First, we consider a two-user Multiple-Input-Single-Output (MISO) Broadcast Channel (BC) under statistical and delayed CSIT.
We mainly focus on linear beamforming and power allocation designs for ergodic sum rate maximisation.
The proposed designs enable higher sum rate than the conventional designs.
Interestingly, we propose a novel transmission framework which makes better use of statistical and delayed CSIT and smoothly bridges between statistical CSIT-based strategies and delayed CSIT-based strategies.
Second, we consider a multiuser massive MIMO system under partial and statistical CSIT.
In order to tackle multiuser interference incurred by partial CSIT, a Rate-Splitting (RS) transmission strategy has been proposed recently.
We generalise the idea of RS into the large-scale array.
By further exploiting statistical CSIT, we propose a novel framework Hierarchical-Rate-Splitting that is particularly suited to massive MIMO systems.
Third, we consider a multiuser Millimetre Wave (mmWave) system with hybrid analog/digital precoding under statistical and quantised CSIT.
We leverage statistical CSIT to design digital precoder for interference mitigation while all feedback overhead is reserved for precise analog beamforming.
For very limited feedback and/or very sparse channels, the proposed precoding scheme yields higher sum rate than the conventional precoding schemes under a fixed total feedback constraint.
Moreover, a RS transmission strategy is introduced to further tackle the multiuser interference, enabling remarkable saving in feedback overhead compared with conventional transmission strategies.
Finally, we investigate the downlink hybrid precoding for physical layer multicasting with a limited number of RF chains.
We propose a low complexity algorithm to compute the analog precoder that achieves near-optimal max-min performance.
Moreover, we derive a simple condition under which the hybrid precoding driven by a limited number of RF chains incurs no loss of optimality with respect to the fully digital precoding case.Open Acces
Optimal Capacity and Energy Efficiency of Massive MIMO Systems
A lot of effort has been made during the last two decades to study and apply the concepts of MIMO technology in most of the wireless standards. Therefore, a huge improvement in the performance of wireless communications has been made. However, Demand for wireless services has exponentially increased during the past ten years. Hence, high throughput is very important for all users to get the best experience with the offered services. This creates many technical challenges that are difficult to handle with the existing technology. Therefore, massive multiple input multiple output (massive MIMO) is a new technology that has been proposed as one of the solutions that can overcome these challenges and fulfill the requirements of the next generation of wireless communications. The main concept of massive MIMO is that the base station (BS) equipped with a large number of antenna elements serve terminals over the same time-frequency resources. It is going to be one of the key tools that can satisfy and handle the exponential growth in data traffic. Massive MIMO was introduced as a modified and scalable version of multiuser MIMO. Massive MIMO improves systems capacity and energy efficiency using simple linear processing
Novel Efficient Precoding Techniques for Multiuser MIMO Systems
In Multiuser MIMO (MU-MIMO) systems, precoding is essential to eliminate or minimize the multiuser interference (MUI).
However, the design of a suitable precoding algorithm with good overall
performance and low computational complexity at the same time is quite challenging, especially with the increase of system dimensions.
In this thesis, we explore the art of novel low-complexity high-performance precoding algorithms with both linear and non-linear processing strategies.
Block diagonalization (BD)-type based precoding techniques are well-known linear precoding strategies
for MU-MIMO systems.
By employing BD-type precoding algorithms at the transmit side, the MU-MIMO broadcast channel is decomposed
into multiple independent parallel SU-MIMO channels and achieves the
maximum diversity order at high data rates. The main computational complexity of BD-type precoding algorithms comes from
two singular value decomposition (SVD) operations, which depend on the number of users and the dimensions of each user's channel matrix.
In this thesis, two categories of low-complexity precoding algorithms are proposed to
reduce the computational complexity and improve the performance of BD-type precoding algorithms.
One is based on multiple LQ decompositions and lattice reductions. The other one is based on a channel inversion technique, QR decompositions, and lattice reductions to decouple the MU-MIMO channel into equivalent SU-MIMO channels.
Both of the two proposed precoding algorithms can achieve a comparable sum-rate performance as BD-type precoding algorithms, substantial bit error
rate (BER) performance gains, and a simplified receiver structure, while requiring a much lower complexity.
Tomlinson-Harashima precoding (THP) is a prominent nonlinear processing technique employed at the transmit side and is a dual to the successive interference cancelation (SIC) detection at the receive side. Like SIC detection, the performance of THP strongly depends on the ordering of the precoded symbols.
The optimal ordering algorithm, however, is impractical for MU-MIMO systems with multiple receive antennas. We propose a multi-branch THP (MB-THP) scheme and algorithms that employ multiple transmit processing and ordering strategies along with a selection scheme to mitigate interference in MU-MIMO systems.
Two types of multi-branch THP (MB-THP) structures are proposed. The first one employs a decentralized strategy with diagonal weighted filters at the receivers of the users and the second uses a diagonal weighted filter at the transmitter.
The MB-MMSE-THP algorithms are also derived based on an extended system model with the aid of an LQ decomposition, which is much simpler compared to the conventional MMSE-THP algorithms. Simulation results show that a better BER performance can be achieved by the proposed MB-MMSE-THP precoder with a small computational complexity increase
Proceedings of the Fall 1995 Advanced Digital Communication Systems
Coordinated Science Laboratory was formerly known as Control Systems Laborator
- …