DYRE: a DYnamic REconfigurable solution to increase GPGPU's reliability

General-purpose graphics processing units (GPGPUs) are extensively used in high-performance computing. However, it is well known that these devices’ reliability may be limited by the rising of faults at the hardware level. This work introduces a flexible solution to detect and mitigate permanent faults affecting the execution units in these parallel devices. The proposed solution is based on adding some spare modules to perform two in-field operations: detecting and mitigating faults. The solution takes advantage of the regularity of the execution units in the device to avoid significant design changes and reduce the overhead. The proposed solution was evaluated in terms of reliability improvement and area, performance, and power overhead costs. For this purpose, we resorted to a micro-architectural open-source GPGPU model (FlexGripPlus). Experimental results show that the proposed solution can extend the reliability by up to 57%, with overhead costs lower than 2% and 8% in area and power, respectively

Shredder: GPU-Accelerated Incremental Storage and Computation

Redundancy elimination using data deduplication and incremental data processing has emerged as an important technique to minimize storage and computation requirements in data center computing. In this paper, we present the design, implementation and evaluation of Shredder, a high performance content-based chunking framework for supporting incremental storage and computation systems. Shredder exploits the massively parallel processing power of GPUs to overcome the CPU bottlenecks of content-based chunking in a cost-effective manner. Unlike previous uses of GPUs, which have focused on applications where computation costs are dominant, Shredder is designed to operate in both compute-and dataintensive environments. To allow this, Shredder provides several novel optimizations aimed at reducing the cost of transferring data between host (CPU) and GPU, fully utilizing the multicore architecture at the host, and reducing GPU memory access latencies. With our optimizations, Shredder achieves a speedup of over 5X for chunking bandwidth compared to our optimized parallel implementation without a GPU on the same host system. Furthermore, we present two real world applications of Shredder: an extension to HDFS, which serves as a basis for incremental MapReduce computations, and an incremental cloud backup system. In both contexts, Shredder detects redundancies in the input data across successive runs, leading to significant savings in storage, computation, and end-to-end completion times.

New Techniques for On-line Testing and Fault Mitigation in GPUs

L'abstract è presente nell'allegato / the abstract is in the attachmen

Hardware Acceleration for Unstructured Big Data and Natural Language Processing.

The confluence of the rapid growth in electronic data in recent years, and the renewed interest in domain-specific hardware accelerators presents exciting technical opportunities. Traditional scale-out solutions for processing the vast amounts of text data have been shown to be energy- and cost-inefficient. In contrast, custom hardware accelerators can provide higher throughputs, lower latencies, and significant energy savings. In this thesis, I present a set of hardware accelerators for unstructured big-data processing and natural language processing. The first accelerator, called HAWK, aims to speed up the processing of ad hoc queries against large in-memory logs. HAWK is motivated by the observation that traditional software-based tools for processing large text corpora use memory bandwidth inefficiently due to software overheads, and, thus, fall far short of peak scan rates possible on modern memory systems. HAWK is designed to process data at a constant rate of 32 GB/s—faster than most extant memory systems. I demonstrate that HAWK outperforms state-of-the-art software solutions for text processing, almost by an order of magnitude in many cases. HAWK occupies an area of 45 sq-mm in its pareto-optimal configuration and consumes 22 W of power, well within the area and power envelopes of modern CPU chips. The second accelerator I propose aims to speed up similarity measurement calculations for semantic search in the natural language processing space. By leveraging the latency hiding concepts of multi-threading and simple scheduling mechanisms, my design maximizes functional unit utilization. This similarity measurement accelerator provides speedups of 36x-42x over optimized software running on server-class cores, while requiring 56x-58x lower energy, and only 1.3% of the area.PhDComputer Science and EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/116712/1/prateekt_1.pd

Cross layer reliability estimation for digital systems

Forthcoming manufacturing technologies hold the promise to increase multifuctional computing systems performance and functionality thanks to a remarkable growth of the device integration density. Despite the benefits introduced by this technology improvements, reliability is becoming a key challenge for the semiconductor industry. With transistor size reaching the atomic dimensions, vulnerability to unavoidable fluctuations in the manufacturing process and environmental stress rise dramatically. Failing to meet a reliability requirement may add excessive re-design cost to recover and may have severe consequences on the success of a product. %Worst-case design with large margins to guarantee reliable operation has been employed for long time. However, it is reaching a limit that makes it economically unsustainable due to its performance, area, and power cost. One of the open challenges for future technologies is building ``dependable'' systems on top of unreliable components, which will degrade and even fail during normal lifetime of the chip. Conventional design techniques are highly inefficient. They expend significant amount of energy to tolerate the device unpredictability by adding safety margins to a circuit's operating voltage, clock frequency or charge stored per bit. Unfortunately, the additional cost introduced to compensate unreliability are rapidly becoming unacceptable in today's environment where power consumption is often the limiting factor for integrated circuit performance, and energy efficiency is a top concern. Attention should be payed to tailor techniques to improve the reliability of a system on the basis of its requirements, ending up with cost-effective solutions favoring the success of the product on the market. Cross-layer reliability is one of the most promising approaches to achieve this goal. Cross-layer reliability techniques take into account the interactions between the layers composing a complex system (i.e., technology, hardware and software layers) to implement efficient cross-layer fault mitigation mechanisms. Fault tolerance mechanism are carefully implemented at different layers starting from the technology up to the software layer to carefully optimize the system by exploiting the inner capability of each layer to mask lower level faults. For this purpose, cross-layer reliability design techniques need to be complemented with cross-layer reliability evaluation tools, able to precisely assess the reliability level of a selected design early in the design cycle. Accurate and early reliability estimates would enable the exploration of the system design space and the optimization of multiple constraints such as performance, power consumption, cost and reliability. This Ph.D. thesis is devoted to the development of new methodologies and tools to evaluate and optimize the reliability of complex digital systems during the early design stages. More specifically, techniques addressing hardware accelerators (i.e., FPGAs and GPUs), microprocessors and full systems are discussed. All developed methodologies are presented in conjunction with their application to real-world use cases belonging to different computational domains

Memory Subsystem Optimization Techniques for Modern High-Performance General-Purpose Processors

abstract: General-purpose processors propel the advances and innovations that are the subject of humanity’s many endeavors. Catering to this demand, chip-multiprocessors (CMPs) and general-purpose graphics processing units (GPGPUs) have seen many high-performance innovations in their architectures. With these advances, the memory subsystem has become the performance- and energy-limiting aspect of CMPs and GPGPUs alike. This dissertation identifies and mitigates the key performance and energy-efficiency bottlenecks in the memory subsystem of general-purpose processors via novel, practical, microarchitecture and system-architecture solutions. Addressing the important Last Level Cache (LLC) management problem in CMPs, I observe that LLC management decisions made in isolation, as in prior proposals, often lead to sub-optimal system performance. I demonstrate that in order to maximize system performance, it is essential to manage the LLCs while being cognizant of its interaction with the system main memory. I propose ReMAP, which reduces the net memory access cost by evicting cache lines that either have no reuse, or have low memory access cost. ReMAP improves the performance of the CMP system by as much as 13%, and by an average of 6.5%. Rather than the LLC, the L1 data cache has a pronounced impact on GPGPU performance by acting as the bandwidth filter for the rest of the memory subsystem. Prior work has shown that the severely constrained data cache capacity in GPGPUs leads to sub-optimal performance. In this thesis, I propose two novel techniques that address the GPGPU data cache capacity problem. I propose ID-Cache that performs effective cache bypassing and cache line size selection to improve cache capacity utilization. Next, I propose LATTE-CC that considers the GPU’s latency tolerance feature and adaptively compresses the data stored in the data cache, thereby increasing its effective capacity. ID-Cache and LATTE-CC are shown to achieve 71% and 19.2% speedup, respectively, over a wide variety of GPGPU applications. Complementing the aforementioned microarchitecture techniques, I identify the need for system architecture innovations to sustain performance scalability of GPG- PUs in the face of slowing Moore’s Law. I propose a novel GPU architecture called the Multi-Chip-Module GPU (MCM-GPU) that integrates multiple GPU modules to form a single logical GPU. With intelligent memory subsystem optimizations tailored for MCM-GPUs, it can achieve within 7% of the performance of a similar but hypothetical monolithic die GPU. Taking a step further, I present an in-depth study of the energy-efficiency characteristics of future MCM-GPUs. I demonstrate that the inherent non-uniform memory access side-effects form the key energy-efficiency bottleneck in the future. In summary, this thesis offers key insights into the performance and energy-efficiency bottlenecks in CMPs and GPGPUs, which can guide future architects towards developing high-performance and energy-efficient general-purpose processors.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Energy-Efficient Computing for Mobile Signal Processing

Mobile devices have rapidly proliferated, and deployment of handheld devices continues to increase at a spectacular rate. As today's devices not only support advanced signal processing of wireless communication data but also provide rich sets of applications, contemporary mobile computing requires both demanding computation and efficiency. Most mobile processors combine general-purpose processors, digital signal processors, and hardwired application-specific integrated circuits to satisfy their high-performance and low-power requirements. However, such a heterogeneous platform is inefficient in area, power and programmability. Improving the efficiency of programmable mobile systems is a critical challenge and an active area of computer systems research. SIMD (single instruction multiple data) architectures are very effective for data-level-parallelism intense algorithms in mobile signal processing. However, new characteristics of advanced wireless/multimedia algorithms require architectural re-evaluation to achieve better energy efficiency. Therefore, fourth generation wireless protocol and high definition mobile video algorithms are analyzed to enhance a wide-SIMD architecture. The key enhancements include 1) programmable crossbar to support complex data alignment, 2) SIMD partitioning to support fine-grain SIMD computation, and 3) fused operation to support accelerating frequently used instruction pairs. Near-threshold computation has been attractive in low-power architecture research because it balances performance and power. To further improve energy efficiency in mobile computing, near-threshold computation is applied to a wide SIMD architecture. This proposed near-threshold wide SIMD architecture-Diet SODA-presents interesting architectural design decisions such as 1) very wide SIMD datapath to compensate for degraded performance induced by near-threshold computation and 2) scatter-gather data prefetcher to exploit large latency gap between memory and the SIMD datapath. Although near-threshold computation provides excellent energy efficiency, it suffers from increased delay variations. A systematic study of delay variations in near-threshold computing is performed and simple techniques-structural duplication and voltage/frequency margining-are explored to tolerate and mitigate the delay variations in near-threshold wide SIMD architectures. This dissertation analyzes representative wireless/multimedia mobile signal processing algorithms, proposes an energy-efficient programmable platform, and evaluates performance and power. A main theme of this dissertation is that the performance and efficiency of programmable embedded systems can be significantly improved with a combination of parallel SIMD and near-threshold computations.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86356/1/swseo_1.pd

Incremental parallel and distributed systems

Incremental computation strives for efficient successive runs of applications by re-executing only those parts of the computation that are affected by a given input change instead of recomputing everything from scratch. To realize the benefits of incremental computation, researchers and practitioners are developing new systems where the application programmer can provide an efficient update mechanism for changing application data. Unfortunately, most of the existing solutions are limiting because they not only depart from existing programming models, but also require programmers to devise an incremental update mechanism (or a dynamic algorithm) on a per-application basis. In this thesis, we present incremental parallel and distributed systems that enable existing real-world applications to automatically benefit from efficient incremental updates. Our approach neither requires departure from current models of programming, nor the design and implementation of dynamic algorithms. To achieve these goals, we have designed and built the following incremental systems: (i) Incoop — a system for incremental MapReduce computation; (ii) Shredder — a GPU-accelerated system for incremental storage; (iii) Slider — a stream processing platform for incremental sliding window analytics; and (iv) iThreads — a threading library for parallel incremental computation. Our experience with these systems shows that significant performance can be achieved for existing applications without requiring any additional effort from programmers.Inkrementelle Berechnungen ermöglichen die effizientere Ausführung aufeinanderfolgender Anwendungsaufrufe, indem nur die Teilbereiche der Anwendung erneut ausgefürt werden, die von den Änderungen der Eingabedaten betroffen sind. Dieses Berechnungsverfahren steht dem konventionellen und vollständig neu berechnenden Verfahren gegenüber. Um den Vorteil inkrementeller Berechnungen auszunutzen, entwickeln sowohl Wissenschaft als auch Industrie neue Systeme, bei denen der Anwendungsprogrammierer den effizienten Aktualisierungsmechanismus für die Änderung der Anwendungsdaten bereitstellt. Bedauerlicherweise lassen sich existierende Lösungen meist nur eingeschränkt anwenden, da sie das konventionelle Programmierungsmodel beibehalten und dadurch die erneute Entwicklung vom Programmierer des inkrementellen Aktualisierungsmechanismus (oder einen dynamischen Algorithmus) für jede Anwendung verlangen. Diese Doktorarbeit stellt inkrementelle Parallele- und Verteiltesysteme vor, die es existierenden Real-World-Anwendungen ermöglichen vom Vorteil der inkre- mentellen Berechnung automatisch zu profitieren. Unser Ansatz erfordert weder eine Abkehr von gegenwärtigen Programmiermodellen, noch Design und Implementierung von anwendungsspezifischen dynamischen Algorithmen. Um dieses Ziel zu erreichen, haben wir die folgenden Systeme zur inkrementellen parallelen und verteilten Berechnung entworfen und implementiert: (i) Incoop — ein System für inkrementelle Map-Reduce-Programme; (ii) Shredder — ein GPU- beschleunigtes System zur inkrementellen Speicherung; (iii) Slider — eine Plat- tform zur Batch-basierten Streamverarbeitung via inkrementeller Sliding-Window- Berechnung; und (iv) iThreads — eine Threading-Bibliothek zur parallelen inkre- mentellen Berechnung. Unsere Erfahrungen mit diesen Systemen zeigen, dass unsere Methoden sehr gute Performanz liefern können, und dies ohne weiteren Aufwand des Programmierers

Incremental parallel and distributed systems

Incremental computation strives for efficient successive runs of applications by re-executing only those parts of the computation that are affected by a given input change instead of recomputing everything from scratch. To realize the benefits of incremental computation, researchers and practitioners are developing new systems where the application programmer can provide an efficient update mechanism for changing application data. Unfortunately, most of the existing solutions are limiting because they not only depart from existing programming models, but also require programmers to devise an incremental update mechanism (or a dynamic algorithm) on a per-application basis. In this thesis, we present incremental parallel and distributed systems that enable existing real-world applications to automatically benefit from efficient incremental updates. Our approach neither requires departure from current models of programming, nor the design and implementation of dynamic algorithms. To achieve these goals, we have designed and built the following incremental systems: (i) Incoop — a system for incremental MapReduce computation; (ii) Shredder — a GPU-accelerated system for incremental storage; (iii) Slider — a stream processing platform for incremental sliding window analytics; and (iv) iThreads — a threading library for parallel incremental computation. Our experience with these systems shows that significant performance can be achieved for existing applications without requiring any additional effort from programmers.Inkrementelle Berechnungen ermöglichen die effizientere Ausführung aufeinanderfolgender Anwendungsaufrufe, indem nur die Teilbereiche der Anwendung erneut ausgefürt werden, die von den Änderungen der Eingabedaten betroffen sind. Dieses Berechnungsverfahren steht dem konventionellen und vollständig neu berechnenden Verfahren gegenüber. Um den Vorteil inkrementeller Berechnungen auszunutzen, entwickeln sowohl Wissenschaft als auch Industrie neue Systeme, bei denen der Anwendungsprogrammierer den effizienten Aktualisierungsmechanismus für die Änderung der Anwendungsdaten bereitstellt. Bedauerlicherweise lassen sich existierende Lösungen meist nur eingeschränkt anwenden, da sie das konventionelle Programmierungsmodel beibehalten und dadurch die erneute Entwicklung vom Programmierer des inkrementellen Aktualisierungsmechanismus (oder einen dynamischen Algorithmus) für jede Anwendung verlangen. Diese Doktorarbeit stellt inkrementelle Parallele- und Verteiltesysteme vor, die es existierenden Real-World-Anwendungen ermöglichen vom Vorteil der inkre- mentellen Berechnung automatisch zu profitieren. Unser Ansatz erfordert weder eine Abkehr von gegenwärtigen Programmiermodellen, noch Design und Implementierung von anwendungsspezifischen dynamischen Algorithmen. Um dieses Ziel zu erreichen, haben wir die folgenden Systeme zur inkrementellen parallelen und verteilten Berechnung entworfen und implementiert: (i) Incoop — ein System für inkrementelle Map-Reduce-Programme; (ii) Shredder — ein GPU- beschleunigtes System zur inkrementellen Speicherung; (iii) Slider — eine Plat- tform zur Batch-basierten Streamverarbeitung via inkrementeller Sliding-Window- Berechnung; und (iv) iThreads — eine Threading-Bibliothek zur parallelen inkre- mentellen Berechnung. Unsere Erfahrungen mit diesen Systemen zeigen, dass unsere Methoden sehr gute Performanz liefern können, und dies ohne weiteren Aufwand des Programmierers

Decompose and Conquer: Addressing Evasive Errors in Systems on Chip

Modern computer chips comprise many components, including microprocessor cores, memory modules, on-chip networks, and accelerators. Such system-on-chip (SoC) designs are deployed in a variety of computing devices: from internet-of-things, to smartphones, to personal computers, to data centers. In this dissertation, we discuss evasive errors in SoC designs and how these errors can be addressed efficiently. In particular, we focus on two types of errors: design bugs and permanent faults. Design bugs originate from the limited amount of time allowed for design verification and validation. Thus, they are often found in functional features that are rarely activated. Complete functional verification, which can eliminate design bugs, is extremely time-consuming, thus impractical in modern complex SoC designs. Permanent faults are caused by failures of fragile transistors in nano-scale semiconductor manufacturing processes. Indeed, weak transistors may wear out unexpectedly within the lifespan of the design. Hardware structures that reduce the occurrence of permanent faults incur significant silicon area or performance overheads, thus they are infeasible for most cost-sensitive SoC designs. To tackle and overcome these evasive errors efficiently, we propose to leverage the principle of decomposition to lower the complexity of the software analysis or the hardware structures involved. To this end, we present several decomposition techniques, specific to major SoC components. We first focus on microprocessor cores, by presenting a lightweight bug-masking analysis that decomposes a program into individual instructions to identify if a design bug would be masked by the program's execution. We then move to memory subsystems: there, we offer an efficient memory consistency testing framework to detect buggy memory-ordering behaviors, which decomposes the memory-ordering graph into small components based on incremental differences. We also propose a microarchitectural patching solution for memory subsystem bugs, which augments each core node with a small distributed programmable logic, instead of including a global patching module. In the context of on-chip networks, we propose two routing reconfiguration algorithms that bypass faulty network resources. The first computes short-term routes in a distributed fashion, localized to the fault region. The second decomposes application-aware routing computation into simple routing rules so to quickly find deadlock-free, application-optimized routes in a fault-ridden network. Finally, we consider general accelerator modules in SoC designs. When a system includes many accelerators, there are a variety of interactions among them that must be verified to catch buggy interactions. To this end, we decompose such inter-module communication into basic interaction elements, which can be reassembled into new, interesting tests. Overall, we show that the decomposition of complex software algorithms and hardware structures can significantly reduce overheads: up to three orders of magnitude in the bug-masking analysis and the application-aware routing, approximately 50 times in the routing reconfiguration latency, and 5 times on average in the memory-ordering graph checking. These overhead reductions come with losses in error coverage: 23% undetected bug-masking incidents, 39% non-patchable memory bugs, and occasionally we overlook rare patterns of multiple faults. In this dissertation, we discuss the ideas and their trade-offs, and present future research directions.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147637/1/doowon_1.pd