Cache memory design in the FinFET era

The major problem in the future technology scaling is the variations in process parameters that are interpreted as imperfections in the development process. Moreover, devices are more sensitive to the environmental changes of temperature and supply volt- age as well as to ageing. All these influences are manifested in the integrated circuits as increased power consumption, reduced maximal operating frequency and increased number of failures. These effects have been partially overcome with the introduction of the FinFET technology which have solved the problem of variability caused by Random Dopant Fluctuations. However, in the next ten years channel length is projected to shrink to 10nm where the variability source generated by Line Edge Roughness will dominate, and its effects on the threshold voltage variations will become critical. The embedded memories with their cells as the basic building unit are the most prone to these effects due to their the smallest dimensions. Because of that, memories should be designed with particular care in order to make possible further technology scaling. This thesis explores upcoming 10nm FinFETs and the existing issues in the cache memory design with this technology. More- over, it tries to present some original and novel techniques on the different level of design abstraction for mitigating the effects of process and environmental variability. At first original method for simulating variability of Tri-Gate Fin- FETs is presented using conventional HSPICE simulation environment and BSIM-CMG model cards. When that is accomplished, thorough characterisation of traditional SRAM cell circuits (6T and 8T) is performed. Possibility of using Independent Gate FinFETs for increasing cell stability has been explored, also. Gain Cells appeared in the recent past as an attractive alternative for in the cache memory design. This thesis partially explores this idea by presenting and performing detailed circuit analysis of the dynamic 3T gain cell for 10nm FinFETs. At the top of this work, thesis shows one micro-architecture optimisation of high-speed cache when it is implemented by 3T gain cells. We show how the cache coherency states can be used in order to reduce refresh energy of the memory as well as reduce memory ageing.El principal problema de l'escalat la tecnologia són les variacions en els paràmetres de disseny (imperfeccions) durant procés de fabricació. D'altra banda, els dispositius també són més sensibles als canvis ambientals de temperatura, la tensió d'alimentació, així com l'envelliment. Totes aquestes influències es manifesten en els circuits integrats com l'augment de consum d'energia, la reducció de la freqüència d'operació màxima i l'augment del nombre de xips descartats. Aquests efectes s'han superat parcialment amb la introducció de la tecnologia FinFET que ha resolt el problema de la variabilitat causada per les fluctuacions de dopants aleatòries. No obstant això, en els propers deu anys, l'ample del canal es preveu que es reduirà a 10nm, on la font de la variabilitat generada per les rugositats de les línies de material dominarà, i els seu efecte en les variacions de voltatge llindar augmentarà. Les memòries encastades amb les seves cel·les com la unitat bàsica de construcció són les més propenses a sofrir aquests efectes a causa de les seves dimensions més petites. A causa d'això, cal dissenyar les memòries amb una especial cura per tal de fer possible l'escalat de la tecnologia. Aquesta tesi explora la tecnologia de FinFETs de 10nm i els problemes existents en el disseny de memòries amb aquesta tecnologia. A més a més, presentem noves tècniques originals sobre diferents nivells d'abstracció del disseny per a la mitigació dels efectes les variacions tan de procés com ambientals. En primer lloc, presentem un mètode original per a la simulació de la variabilitat de Tri-Gate FinFETs usant entorn de simulació HSPICE convencional i models de tecnologia BSIMCMG. Després, es realitza la caracterització completa dels circuits de cel·les SRAM tradicionals (6T i 8T) conjuntament amb l'ús de Gate-independent FinFETs per augmentar l'estabilitat de la cèl·lula

Static random-access memory designs based on different FinFET at lower technology node (7nm)

Title from PDF of title page viewed January 15, 2020Thesis advisor: Masud H ChowdhuryVitaIncludes bibliographical references (page 50-57)Thesis (M.S.)--School of Computing and Engineering. University of Missouri--Kansas City, 2019The Static Random-Access Memory (SRAM) has a significant performance impact on current nanoelectronics systems. To improve SRAM efficiency, it is important to utilize emerging technologies to overcome short-channel effects (SCE) of conventional CMOS. FinFET devices are promising emerging devices that can be utilized to improve the performance of SRAM designs at lower technology nodes. In this thesis, I present detail analysis of SRAM cells using different types of FinFET devices at 7nm technology. From the analysis, it can be concluded that the performance of both 6T and 8T SRAM designs are improved. 6T SRAM achieves a 44.97% improvement in the read energy compared to 8T SRAM. However, 6T SRAM write energy degraded by 3.16% compared to 8T SRAM. Read stability and write ability of SRAM cells are determined using Static Noise Margin and N- curve methods. Moreover, Monte Carlo simulations are performed on the SRAM cells to evaluate process variations. Simulations were done in HSPICE using 7nm Asymmetrical Underlap FinFET technology. The quasiplanar FinFET structure gained considerable attention because of the ease of the fabrication process [1] – [4]. Scaling of technology have degraded the performance of CMOS designs because of the short channel effects (SCEs) [5], [6]. Therefore, there has been upsurge in demand for FinFET devices for emerging market segments including artificial intelligence and cloud computing (AI) [8], [9], Internet of Things (IoT) [10] – [13] and biomedical [17] –[18] which have their own exclusive style of design. In recent years, many Underlapped FinFET devices were proposed to have better control of the SCEs in the sub-nanometer technologies [3], [4], [19] – [33]. Underlap on either side of the gate increases effective channel length as seen by the charge carriers. Consequently, the source-to-drain tunneling probability is improved. Moreover, edge direct tunneling leakage components can be reduced by controlling the electric field at the gate-drain junction . There is a limitation on the extent of underlap on drain or source sides because the ION is lower for larger underlap. Additionally, FinFET based designs have major width quantization issue. The width of a FinFET device increases only in quanta of silicon fin height (HFIN) [4]. The width quantization issue becomes critical for ratioed designs like SRAMs, where proper sizing of the transistors is essential for fault-free operation. FinFETs based on Design/Technology Co-Optimization (DTCO_F) approach can overcome these issues [38]. DTCO_F follows special design rules, which provides the specifications for the standard SRAM cells with special spacing rules and low leakages. The performances of 6T SRAM designs implemented by different FinFET devices are compared for different pull-up, pull down and pass gate transistor (PU: PD:PG) ratios to identify the best FinFET device for high speed and low power SRAM applications. Underlapped FinFETs (UF) and Design/Technology Co-Optimized FinFETs (DTCO_F) are used for the design and analysis. It is observed that with the PU: PD:PG ratios of 1:1:1 and 1:5:2 for the UF-SRAMs the read energy has degraded by 3.31% and 48.72% compared to the DTCO_F-SRAMs, respectively. However, the read energy with 2:5:2 ratio has improved by 32.71% in the UF-SRAM compared to the DTCO_F-SRAMs. The write energy with 1:1:1 configuration has improved by 642.27% in the UF-SRAM compared to the DTCO_F-SRAM. On the other hand, the write energy with 1:5:2 and 2:5:2 configurations have degraded by 86.26% and 96% in the UF-SRAMs compared to the DTCO_F-SRAMs. The stability and reliability of different SRAMs are also evaluated for 500mV supply. From the analysis, it can be concluded that Asymmetrical Underlapped FinFET is better for high-speed applications and DTCO FinFET for low power applications.Introduction -- Next generation high performance device: FinFET -- FinFET based SRAM bitcell designs -- Benchmarking of UF-SRAMs and DTCO-F-SRAMS -- Collaborative project -- Internship experience at INTEL and Marvell Semiconductor -- Conclusion and future wor

Ultra Low Power Digital Circuit Design for Wireless Sensor Network Applications

Ny forskning innenfor feltet trådløse sensornettverk åpner for nye og innovative produkter og løsninger. Biomedisinske anvendelser er blant områdene med størst potensial og det investeres i dag betydelige beløp for å bruke denne teknologien for å gjøre medisinsk diagnostikk mer effektiv samtidig som man åpner for fjerndiagnostikk basert på trådløse sensornoder integrert i et ”helsenett”. Målet er å forbedre tjenestekvalitet og redusere kostnader samtidig som brukerne skal oppleve forbedret livskvalitet som følge av økt trygghet og mulighet for å tilbringe mest mulig tid i eget hjem og unngå unødvendige sykehusbesøk og innleggelser. For å gjøre dette til en realitet er man avhengige av sensorelektronikk som bruker minst mulig energi slik at man oppnår tilstrekkelig batterilevetid selv med veldig små batterier. I sin avhandling ” Ultra Low power Digital Circuit Design for Wireless Sensor Network Applications” har PhD-kandidat Farshad Moradi fokusert på nye løsninger innenfor konstruksjon av energigjerrig digital kretselektronikk. Avhandlingen presenterer nye løsninger både innenfor aritmetiske og kombinatoriske kretser, samtidig som den studerer nye statiske minneelementer (SRAM) og alternative minnearkitekturer. Den ser også på utfordringene som oppstår når silisiumteknologien nedskaleres i takt med mikroprosessorutviklingen og foreslår løsninger som bidrar til å gjøre kretsløsninger mer robuste og skalerbare i forhold til denne utviklingen. De viktigste konklusjonene av arbeidet er at man ved å introdusere nye konstruksjonsteknikker både er i stand til å redusere energiforbruket samtidig som robusthet og teknologiskalerbarhet øker. Forskningen har vært utført i samarbeid med Purdue University og vært finansiert av Norges Forskningsråd gjennom FRINATprosjektet ”Micropower Sensor Interface in Nanometer CMOS Technology”

A Survey on Low-Power Techniques with Emerging Technologies: From Devices to Systems

Nowadays, power consumption is one of the main limitations of electronic systems. In this context, novel and emerging devices provide us with new opportunities to keep the trend to low-power design. In this survey paper, we present a transversal survey on energy efficient techniques ranging from devices to architectures. The actual trends of device research, with fully-depleted planar devices, tri-gate geometries and gate-all-around structures, allows us to reach an increasingly higher level of performance while reducing the associated power. In addition, beyond the simple device properties enhancements, emerging devices also lead to innovations at circuit and architectural levels. In particular, devices whose properties can be tuned through additional terminals enable a fine and dynamic control of device threshold. They also enable designers to realize logic gates and to implement power-related techniques in a compact way unreachable to standard technologies. These innovations reduce the power consumption at the gate level and unlock new means of actuation in architectural solutions like adaptive voltage and frequency scaling

On Improving Robustness of Hardware Security Primitives and Resistance to Reverse Engineering Attacks

The continued growth of information technology (IT) industry and proliferation of interconnected devices has aggravated the problem of ensuring security and necessitated the need for novel, robust solutions. Physically unclonable functions (PUFs) have emerged as promising secure hardware primitives that can utilize the disorder introduced during manufacturing process to generate unique keys. They can be utilized as \textit{lightweight} roots-of-trust for use in authentication and key generation systems. Unlike insecure non-volatile memory (NVM) based key storage systems, PUFs provide an advantage -- no party, including the manufacturer, should be able to replicate the physical disorder and thus, effectively clone the PUF. However, certain practical problems impeded the widespread deployment of PUFs. This dissertation addresses such problems of (i) reliability and (ii) unclonability. Also, obfuscation techniques have proven necessary to protect intellectual property in the presence of an untrusted supply chain and are needed to aid against counterfeiting. This dissertation explores techniques utilizing layout and logic-aware obfuscation. Collectively, we present secure and cost-effective solutions to address crucial hardware security problems

Strain integration and performance optimization in sub-20nm FDSOI CMOS technology

La technologie CMOS à base de Silicium complètement déserté sur isolant (FDSOI) est considérée comme une option privilégiée pour les applications à faible consommation telles que les applications mobiles ou les objets connectés. Elle doit cela à son architecture garantissant un excellent comportement électrostatique des transistors ainsi qu'à l'intégration de canaux contraints améliorant la mobilité des porteurs. Ce travail de thèse explore des solutions innovantes en FDSOI pour nœuds 20nm et en deçà, comprenant l'ingénierie de la contrainte mécanique à travers des études sur les matériaux, les dispositifs, les procédés d'intégration et les dessins des circuits. Des simulations mécaniques, caractérisations physiques (µRaman), et intégrations expérimentales de canaux contraints (sSOI, SiGe) ou de procédés générant de la contrainte (nitrure, fluage de l'oxyde enterré) nous permettent d'apporter des recommandations pour la technologie et le dessin physique des transistors en FDSOI. Dans ce travail de thèse, nous avons étudié le transport dans les dispositifs à canal court, ce qui nous a amené à proposer une méthode originale pour extraire simultanément la mobilité des porteurs et la résistance d'accès. Nous mettons ainsi en évidence la sensibilité de la résistance d'accès à la contrainte que ce soit pour des transistors FDSOI ou nanofils. Nous mettons en évidence et modélisons la relaxation de la contrainte dans le SiGe apparaissant lors de la gravure des motifs et causant des effets géométriques (LLE) dans les technologies FDSOI avancées. Nous proposons des solutions de type dessin ainsi que des solutions technologiques afin d'améliorer la performance des cellules standard digitales et de mémoire vive statique (SRAM). En particulier, nous démontrons l'efficacité d'une isolation duale pour la gestion de la contrainte et l'extension de la capacité de polarisation arrière, qui un atout majeur de la technologie FDSOI. Enfin, la technologie 3D séquentielle rend possible la polarisation arrière en régime dynamique, à travers une co-optimisation dessin/technologie (DTCO).The Ultra-Thin Body and Buried oxide Fully Depleted Silicon On Insulator (UTBB FDSOI) CMOS technology has been demonstrated to be highly efficient for low power and low leakage applications such as mobile, internet of things or wearable. This is mainly due to the excellent electrostatics in the transistor and the successful integration of strained channel as a carrier mobility booster. This work explores scaling solutions of FDSOI for sub-20nm nodes, including innovative strain engineering, relying on material, device, process integration and circuit design layout studies. Thanks to mechanical simulations, physical characterizations and experimental integration of strained channels (sSOI, SiGe) and local stressors (nitride, oxide creeping, SiGe source/drain) into FDSOI CMOS transistors, we provide guidelines for technology and physical circuit design. In this PhD, we have in-depth studied the carrier transport in short devices, leading us to propose an original method to extract simultaneously the carrier mobility and the access resistance and to clearly evidence and extract the strain sensitivity of the access resistance, not only in FDSOI but also in strained nanowire transistors. Most of all, we evidence and model the patterning-induced SiGe strain relaxation, which is responsible for electrical Local Layout Effects (LLE) in advanced FDSOI transistors. Taking into account these geometrical effects observed at the nano-scale, we propose design and technology solutions to enhance Static Random Access Memory (SRAM) and digital standard cells performance and especially an original dual active isolation integration. Such a solution is not only stress-friendly but can also extend the powerful back-bias capability, which is a key differentiating feature of FDSOI. Eventually the 3D monolithic integration can also leverage planar Fully-Depleted devices by enabling dynamic back-bias owing to a Design/Technology Co-Optimization

Embracing Low-Power Systems with Improvement in Security and Energy-Efficiency

As the economies around the world are aligning more towards usage of computing systems, the global energy demand for computing is increasing rapidly. Additionally, the boom in AI based applications and services has already invited the pervasion of specialized computing hardware architectures for AI (accelerators). A big chunk of research in the industry and academia is being focused on providing energy efficiency to all kinds of power hungry computing architectures. This dissertation adds to these efforts. Aggressive voltage underscaling of chips is one the effective low power paradigms of providing energy efficiency. This dissertation identifies and deals with the reliability and performance problems associated with this paradigm and innovates novel energy efficient approaches. Specifically, the properties of a low power security primitive have been improved and, higher performance has been unlocked in an AI accelerator (Google TPU) in an aggressively voltage underscaled environment. And, novel power saving opportunities have been unlocked by characterizing the usage pattern of a baseline TPU with rigorous mathematical analysis

Charge Trap Transistors (CTT): Turning Logic Transistors into Embedded Non-Volatile Memory for Advanced High-k/Metal Gate CMOS Technologies

While need for embedded non-volatile memory (eNVM) in modern computing systems continues to grow rapidly, the options have been limited due to integration and scaling challenges as well as operational voltage incompatibilities. Introduced in this work is a unique multi-time programmable memory (MTPM) solution for advanced high-k/metal-gate (HKMG) CMOS technologies which turns as-fabricated standard logic transistors into eNVM elements, without the need for any process adders or additional masks. These logic transistors, when employed as eNVM elements, are dubbed “Charge Trap Transistors” (CTTs). The fundamental device physics, principles of operation, and technological breakthroughs required for employing logic transistors as eNVM are presented. Implementation of CTT eNVM in 32 nm, 22 nm, 14 nm, and 7 nm production technologies has been realized and demonstrated in this work. The emerging memory technology landscape and the space that the CTT technology occupies therein are examined.The motivation behind this work is to develop an eNVM technology that is completely process/mask-free, multi-time programmable, operable at low/logic-compatible voltages, scalable, and secure. The CTT technology satisfies all of the aforementioned criteria. CTTs offer a data retention lifetime of > 10 years at 125 �C and an operation temperature range of -55�-125� C. Hardware results demonstrate an endurance of > 10^4 program/erase cycles which is more than adequate for most embedded applications. Hardware security enhancement, on-chip reconfigurable encryption, firmware, BIOS, chip ID, redundancy, repair at wafer and module test and in the field, performance tailoring, and chip configuration are a few of the applications of CTT eNVM. Moreover, the CTT array in its native (unprogrammed) state measures very well as an entropy source for potential PUF (Physically Unclonable Function) applications such as identification, authentication, anti-counterfeiting, secure boot, and cryptographic IP. In addition to the numerous digital applications, CTTs can also be utilized as an analog memory for applications like neuromorphic computing for machine learning (ML) and artificial intelligence (AI)

Reliability-aware memory design using advanced reconfiguration mechanisms

Fast and Complex Data Memory systems has become a necessity in modern computational units in today's integrated circuits. These memory systems are integrated in form of large embedded memory for data manipulation and storage. This goal has been achieved by the aggressive scaling of transistor dimensions to few nanometer (nm) sizes, though; such a progress comes with a drawback, making it critical to obtain high yields of the chips. Process variability, due to manufacturing imperfections, along with temporal aging, mainly induced by higher electric fields and temperature, are two of the more significant threats that can no longer be ignored in nano-scale embedded memory circuits, and can have high impact on their robustness. Static Random Access Memory (SRAM) is one of the most used embedded memories; generally implemented with the smallest device dimensions and therefore its robustness can be highly important in nanometer domain design paradigm. Their reliable operation needs to be considered and achieved both in cell and also in architectural SRAM array design. Recently, and with the approach to near/below 10nm design generations, novel non-FET devices such as Memristors are attracting high attention as a possible candidate to replace the conventional memory technologies. In spite of their favorable characteristics such as being low power and highly scalable, they also suffer with reliability challenges, such as process variability and endurance degradation, which needs to be mitigated at device and architectural level. This thesis work tackles such problem of reliability concerns in memories by utilizing advanced reconfiguration techniques. In both SRAM arrays and Memristive crossbar memories novel reconfiguration strategies are considered and analyzed, which can extend the memory lifetime. These techniques include monitoring circuits to check the reliability status of the memory units, and architectural implementations in order to reconfigure the memory system to a more reliable configuration before a fail happens.Actualmente, el diseño de sistemas de memoria en circuitos integrados busca continuamente que sean más rápidos y complejos, lo cual se ha vuelto de gran necesidad para las unidades de computación modernas. Estos sistemas de memoria están integrados en forma de memoria embebida para una mejor manipulación de los datos y de su almacenamiento. Dicho objetivo ha sido conseguido gracias al agresivo escalado de las dimensiones del transistor, el cual está llegando a las dimensiones nanométricas. Ahora bien, tal progreso ha conllevado el inconveniente de una menor fiabilidad, dado que ha sido altamente difícil obtener elevados rendimientos de los chips. La variabilidad de proceso - debido a las imperfecciones de fabricación - junto con la degradación de los dispositivos - principalmente inducido por el elevado campo eléctrico y altas temperaturas - son dos de las más relevantes amenazas que no pueden ni deben ser ignoradas por más tiempo en los circuitos embebidos de memoria, echo que puede tener un elevado impacto en su robusteza final. Static Random Access Memory (SRAM) es una de las celdas de memoria más utilizadas en la actualidad. Generalmente, estas celdas son implementadas con las menores dimensiones de dispositivos, lo que conlleva que el estudio de su robusteza es de gran relevancia en el actual paradigma de diseño en el rango nanométrico. La fiabilidad de sus operaciones necesita ser considerada y conseguida tanto a nivel de celda de memoria como en el diseño de arquitecturas complejas basadas en celdas de memoria SRAM. Actualmente, con el diseño de sistemas basados en dispositivos de 10nm, dispositivos nuevos no-FET tales como los memristores están atrayendo una elevada atención como posibles candidatos para reemplazar las actuales tecnologías de memorias convencionales. A pesar de sus características favorables, tales como el bajo consumo como la alta escabilidad, ellos también padecen de relevantes retos de fiabilidad, como son la variabilidad de proceso y la degradación de la resistencia, la cual necesita ser mitigada tanto a nivel de dispositivo como a nivel arquitectural. Con todo esto, esta tesis doctoral afronta tales problemas de fiabilidad en memorias mediante la utilización de técnicas de reconfiguración avanzada. La consideración de nuevas estrategias de reconfiguración han resultado ser validas tanto para las memorias basadas en celdas SRAM como en `memristive crossbar¿, donde se ha observado una mejora significativa del tiempo de vida en ambos casos. Estas técnicas incluyen circuitos de monitorización para comprobar la fiabilidad de las unidades de memoria, y la implementación arquitectural con el objetivo de reconfigurar los sistemas de memoria hacia una configuración mucho más fiables antes de que el fallo suced