Dynamically reconfigurable optical access network

This dissertation presents the research results on a fiber-optic high-bitrate access network which enables dynamic bandwidth allocation as a response to varying subscribers' demands and bandwidth needs of emerging services. The motivation of the research is given in Chapter 1 "Introduction" together with a brief comparative discussion on currently available and future access networks. The idea of wavelength reconfigurability in the last-mile networks is described as a solution for more efficient bandwidth utilization and a subject of the Broadband Photonics project. Chapter 2 "Wavelength-flexible WDM/TDM access network - architecture" provides a comprehensive description of the proposed solution with each network element being analyzed in terms of its functionalities. This includes a colorless optical network unit and a reconfigurable optical add/drop multiplexer. An estimation of power budget is followed by the choice of wavelength set and network control and management layer overview. In Chapter 3 "Reflective transceiver module for ONU" after discussing different communication schemes and modulation formats three approaches to a colorless high-bitrate transmitter are analyzed in detail. This includes experiment and simulation results on a reflective semiconductor optical amplifier, reflective electro-absorption modulator and a Michelson-interferometer modulator. The Chapter is concluded with a comparative discussion. Chapter 4 "Reconfigurable optical add/drop multiplexer" discusses another key element in the proposed network architecture which is an integrated structure of micro-ring resonators providing wavelength reconfigurability. The measured characteristics assess the applicability of the device able to support unicast and multicast transmission. A range of possible sources of signal degradation in the access links are analyzed in Chapter 5 "Transmission and network impairments in the access network". An estimation of potential power penalties resulting from such impairments in the proposed system follow afterwards. Special attention is paid to optical in-band crosstalk penalties and improvement methods in Chapter 6 "Interferometric crosstalk in the access network with an RSOA". This subject is treated extensively with the support of mathematical considerations and experimental results. Proof-of-concept experiments of the proposed network architecture are presented in Chapter 7 "Reconfigurable WDM/TDM access network - experiments". The results of bidirectional transmission of high-bitrate WDM signals in different wavelength allocation schemes are discussed in detail. From there, by means of simulations the behavior of a full-scale network is assessed. In Chapter 8 "Migration towards WDM/TDM access network" the migration scenario from currently deployed fiber-optic access networks towards the novel solution is proposed. Afterwards, a short dispute on the economics of last-mile fiber technologies is included. Finally, the work is concluded and potential future research ideas based on this thesis are given in Chapter 9 "Conclusions and further work"

Telecommunication Systems

This book is based on both industrial and academic research efforts in which a number of recent advancements and rare insights into telecommunication systems are well presented. The volume is organized into four parts: "Telecommunication Protocol, Optimization, and Security Frameworks", "Next-Generation Optical Access Technologies", "Convergence of Wireless-Optical Networks" and "Advanced Relay and Antenna Systems for Smart Networks." Chapters within these parts are self-contained and cross-referenced to facilitate further study

Monolithic integrated reflective transceiver in indium phosphide

The work presented in this thesis is about an InP based monolithic integrated reflective transceiver meant for use in future fiber access networks at the user site. The motivation for this research results from the users’ demands for ever-increasing bandwidth at low cost of operation, administration and maintenance. We investigated solutions to these challenges with a network concept using a dynamically reconfigurable optical network topology with a wavelength router and a colorless optical network unit. This work focuses on developing the optical part of the optical network unit, a reflective transceiver. This reflective transceiver consists of three basic components: a tunable wavelength duplexer, a photodetector and a reflective modulator. The tunable wavelength duplexer separates two wavelengths, one for the downstream and one for the upstream signals, and guides them to the photodetector and the reflective modulator. The photodetector detects the downstream data. The reflective modulator modulates the light carrier with the upstream data and reflects it back to the network. The integrated transceiver was realized bymonolithically integrating these components on a common active-passive butt-joint layer stack based on InP technology. This approach not only offers high bandwidth for both downstream data and upstream data, but also lowers the cost of the device and the network operation because of the colorless operation at the user site. The main results obtained within this work are summarized as follows: an efficient and polarization insensitive tunable wavelength duplexer was realized; a new method to fabricate a reflective SOA has been proposed and demonstrated; a high performance waveguide photodetector based on SOA layer stack was successfully fabricated; a low cost photoreceiverwhich includes an InP photodetector and a SiGe amplifier was demonstrated; aworking monolithic integrated reflective transceiver based on InP was successfully realized and demonstrated; two monolithic integrated transceivers aiming for higher bandwidth have been designed and fabricated. In addition, a novel MMI reflector has been proposed and realized with high reflectivity. This work was funded by DutchMinistry of Economic Affairs through the Freeband Project Broadband Photonics Access, the Smartmix projectMemphis and the NRC Photonics

Semiconductor Optical Amplifiers and mm-Wave Wireless Links for Converged Access Networks

Future access networks are converged optical-wireless networks, where fixed-line and wireless services share the same infrastructure. In this book, semiconductor optical amplifiers (SOA) and mm-wave wireless links are investigated, and their use in converged access networks is explored: SOAs compensate losses in the network, and thereby extend the network reach. Millimeter-wave wireless links substitute fiber links when cabling is not economical

Hybridní přístupová síť xPON/xDSL

Import 03/11/2016The aim of this master thesis is to build up experimental hybrid xPON/xDSL, specifically hybrid EPON/ADSL and EPON/VDSL network, together with deployment of the semiconductor optical amplifiers. The first chapter of the theoretical part is focused to describe access networks in consideration of the used transmission medium. The explanation of the transmission channel and transmission techniques applied in DSL technology are discussed in the second chapter. Following chapter compares the main standards of DSL technology. Data transmission and principle of operation is discussed in single chapter aimed to EPON network. Principles of amplification, basic parameters, and properties of the semiconductor optical amplifiers are explained in a separate chapter. Thesis continues with the practical part, where are included the results of all realized measurements. Basic optical measurements (attenuation, dispersion, power level) were performed on the created topologies. The semiconductors optical amplifiers were applied to the EPON network to achieve the gain characteristics of amplifiers and to find out advantages or disadvantages of their use. Then the formed hybrid networks were verified by RFC2544 and ITU-T Y.1564 testing standards to investigate quality of services depending on the fiber and metallic line lengths. Created EPON topology with deployment of the semiconductor optical amplifiers was also designed in OptiSystem software to compare the measured and simulated results.Cieľom tejto dilomovej práce je vybudovať experimentálnu hybridnú sieť xPON/xDSL, konkrétne hybridnú sieť EPON/ADSL a EPON/VDSL spolu s nasadením polovodičových optických zosilňovačov. Prvá kapitola teoreticej časti je zameraná na popis prístupových sietí vzhľadom na typ použitého, prenosového média. V druhej kapitole je vysvetlený prenosový kanál a prenosové techniky používané v technológii DSL. Ďalšia kapitola porovnáva najznámejšie DSL štandardy. V samostanej kapitole zameranej na sieť EPON je vysvetlený dátový prenos a princíp funkčnosti. Princípy zosilnenia, základné parametre a vlastnosti polovodičových optických zosilňovačov sú vysvetlené v samostatnej kapitole. Práca pokračuje praktickou časťou, kde sa nachádzajú výsledky všetkých vykonaných meraní. Na vytvorených topológiach boli vykonané základné merania pre optické siete (útlm, disperzie, výkonové úrovne). Na zistenie zisku zosilňovačov a ich výhody resp. nevýhody, boli zosilňovače nasadené do siete EPON. Hybridné sieťe boli otestované podľa štandardov RFC2544 a ITU-T Y.1564, kvôli zabezpečeniu kvality služieb v závislosti na dĺžky optického vlákna a metalického vedenia. Vytvorená topológia EPON siete spolu s nasadením polovodičových optických zosilňovačov bola navrhnutá v simulačnom software OptiSystem na porovnanie nameraných a odsimulovaných výsledkov.440 - Katedra telekomunikační technikyvýborn

Hybrid fibre and free-space optical solutions in optical access networks

This thesis evaluates the potentials of hybrid fibre and free space optical (FSO) communications access networks in providing a possible solution to an all optical access network. In such network architectures, the FSO link can extend the system to areas where an optical fibre link is not feasible, and/or provide limited mobility for indoor coverage. The performance of hybrid fibre and FSO (HFFSO) networks based on digital pulse position modulation (DPPM), for both the indoor and outdoor environments of the optical access network, are compared with the performance of such a network that is based on conventional on-off keying non-return-to-zero (OOK NRZ) modulation using results obtained through computational and analytical modelling. Wavelength division multiplexing (WDM) and/or code division multiple access (CDMA) are incorporated into the network for high speed transmission and/or network scalability. The impacts of optical scintillation, beam spreading and coupling losses, multiple access interference (MAI), linear optical crosstalk and amplified spontaneous emission noise (ASE) on the performance of hybrid fibre and FSO (HFFSO) access networks are analysed, using performance evaluation methods based on simple Gaussian approximation (GA) and more complex techniques based on moment generating function (MGF), including the Chernoff bound (CB), modified Chernoff bound (MCB) and saddlepoint approximation (SPA). Results in the form of bit error rate (BER), power penalty, required optical power and outage probability are presented, and both the CB and MCB, which are upper bounds, are suggested as safer methods of assessing the performance of practical systems. The possibility of using a CDMA-based HFFSO network to provide high speed optical transmission coverage in an indoor environment is investigated. The results show a reduction in transmit power of mobile devices of about 9 – 20 dB (depending on number of active users) when an optical amplifier is used in the system compared to a non-amplified system, and up to 2.8 dB improvement over OOK NRZ receiver sensitivity is provided by a DPPM system using integrate and compare circuitry for maximum likelihood detection, and at coding level of two, for minimum bandwidth utilization. Outdoor HFFSO networks using only WDM, and incorporating CDMA with WDM, are also investigated. In the presence of atmospheric scintillations, an OOK system is required (for optimum performance) to continuously adapt its decision threshold to the fluctuating instantaneous irradiance. This challenge is overcome by using the maximum likelihood detection DPPM system, and necessitated the derivation of an interchannel crosstalk model for WDM DPPM systems. It is found that optical scintillation worsens the effect of interchannel crosstalk in outdoor HFFSO WDM systems, and results in error floors particularly in the upstream transmission, which are raised when CDMA is incorporated into the system, because of MAI. In both outdoor HFFSO networks (with WDM only and with WDM incorporating CDMA), the optical amplifier is found necessary in achieving acceptable BER, and with a feeder fibre of 20 km and distributive FSO link length of 1500 m, high speed broadband services can be provided to users at safe transmit power at all turbulence levels in clear air atmosphere

Hybrid fibre and free-space optical solutions in optical access networks

This thesis evaluates the potentials of hybrid fibre and free space optical (FSO) communications access networks in providing a possible solution to an all optical access network. In such network architectures, the FSO link can extend the system to areas where an optical fibre link is not feasible, and/or provide limited mobility for indoor coverage. The performance of hybrid fibre and FSO (HFFSO) networks based on digital pulse position modulation (DPPM), for both the indoor and outdoor environments of the optical access network, are compared with the performance of such a network that is based on conventional on-off keying non-return-to-zero (OOK NRZ) modulation using results obtained through computational and analytical modelling. Wavelength division multiplexing (WDM) and/or code division multiple access (CDMA) are incorporated into the network for high speed transmission and/or network scalability. The impacts of optical scintillation, beam spreading and coupling losses, multiple access interference (MAI), linear optical crosstalk and amplified spontaneous emission noise (ASE) on the performance of hybrid fibre and FSO (HFFSO) access networks are analysed, using performance evaluation methods based on simple Gaussian approximation (GA) and more complex techniques based on moment generating function (MGF), including the Chernoff bound (CB), modified Chernoff bound (MCB) and saddlepoint approximation (SPA). Results in the form of bit error rate (BER), power penalty, required optical power and outage probability are presented, and both the CB and MCB, which are upper bounds, are suggested as safer methods of assessing the performance of practical systems. The possibility of using a CDMA-based HFFSO network to provide high speed optical transmission coverage in an indoor environment is investigated. The results show a reduction in transmit power of mobile devices of about 9 – 20 dB (depending on number of active users) when an optical amplifier is used in the system compared to a non-amplified system, and up to 2.8 dB improvement over OOK NRZ receiver sensitivity is provided by a DPPM system using integrate and compare circuitry for maximum likelihood detection, and at coding level of two, for minimum bandwidth utilization. Outdoor HFFSO networks using only WDM, and incorporating CDMA with WDM, are also investigated. In the presence of atmospheric scintillations, an OOK system is required (for optimum performance) to continuously adapt its decision threshold to the fluctuating instantaneous irradiance. This challenge is overcome by using the maximum likelihood detection DPPM system, and necessitated the derivation of an interchannel crosstalk model for WDM DPPM systems. It is found that optical scintillation worsens the effect of interchannel crosstalk in outdoor HFFSO WDM systems, and results in error floors particularly in the upstream transmission, which are raised when CDMA is incorporated into the system, because of MAI. In both outdoor HFFSO networks (with WDM only and with WDM incorporating CDMA), the optical amplifier is found necessary in achieving acceptable BER, and with a feeder fibre of 20 km and distributive FSO link length of 1500 m, high speed broadband services can be provided to users at safe transmit power at all turbulence levels in clear air atmosphere

Advanced Technique and Future Perspective for Next Generation Optical Fiber Communications

Optical fiber communication industry has gained unprecedented opportunities and achieved rapid progress in recent years. However, with the increase of data transmission volume and the enhancement of transmission demand, the optical communication field still needs to be upgraded to better meet the challenges in the future development. Artificial intelligence technology in optical communication and optical network is still in its infancy, but the existing achievements show great application potential. In the future, with the further development of artificial intelligence technology, AI algorithms combining channel characteristics and physical properties will shine in optical communication. This reprint introduces some recent advances in optical fiber communication and optical network, and provides alternative directions for the development of the next generation optical fiber communication technology

Advanced optical modulation and fast reconfigurable en/decoding techniques for OCDMA application

With the explosive growth of bandwidth requirement in optical fiber communication networks, optical code division multiple access (OCDMA) has witnessed tremendous achievements as one of the promising technologies for optical access networks over the past decades. In an OCDMA system, optical code processing is one of the key techniques. Rapid optical code reconfiguration can improve flexibility and security of the OCDMA system. This thesis focuses on advanced optical modulations and en/decoding techniques for applications in fast reconfigurable OCDMA systems and secure optical communications. A novel time domain spectral phase encoding (SPE) scheme which can rapidly reconfigure the optical code and is compatible with conventional spectral domain phase en/decoding by using a pair of dispersive devices and a high speed phase modulator is proposed. Based on this scheme, a novel advanced modulation technique that can simultaneously generate both the optical code and the differential-phase-shift-keying (DPSK) data using a single phase modulator is experimentally demonstrated. A symmetric time domain spectral phase encoding and decoding (SPE/SPD) scheme using a similar setup for both the transmitter and receiver is further proposed, based on which a bit-by-bit optical code scrambling and DPSK data modulation technique for secure optical communications has been successfully demonstrated. By combining optical encoding and optical steganography, a novel approach for secure transmission of time domain spectral phase encoded on-off-keying (OOK)/DPSK-OCDMA signal over public wavelength-division multiplexing (WDM) network has also been proposed and demonstrated. To enable high speed operation of the time domain SPE/SPD scheme and enhance the system security, a rapid programmable, code-length variable bit-by-bit optical code shifting technique is proposed. Based on this technique, security improvements for OOK/DPSK OCDMA systems at data rates of 10Gb/s and 40Gb/s using reconfigurable optical codes of up to 1024-chip have been achieved. Finally, a novel tunable two-dimensional coherent optical en/decoder which can simultaneously perform wavelength hopping and spectral phase encoding based on coupled micro-ring resonator is proposed and theoretically investigated. The techniques included in this thesis could be potentially used for future fast reconfigurable and secure optical code based communication systems