Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems

Power supply noise in delay testing

As technology scales into the Deep Sub-Micron (DSM) regime, circuit designs have become more and more sensitive to power supply noise. Excessive noise can significantly affect the timing performance of DSM designs and cause non-trivial additional delay. In delay test generation, test compaction and test fill techniques can produce excessive power supply noise. This will eventually result in delay test overkill. To reduce this overkill, we propose a low-cost pattern-dependent approach to analyze noise-induced delay variation for each delay test pattern applied to the design. Two noise models have been proposed to address array bond and wire bond power supply networks, and they are experimentally validated and compared. Delay model is then applied to calculate path delay under noise. This analysis approach can be integrated into static test compaction or test fill tools to control supply noise level of delay tests. We also propose an algorithm to predict transition count of a circuit, which can be applied to control switching activity during dynamic compaction. Experiments have been performed on ISCAS89 benchmark circuits. Results show that compacted delay test patterns generated by our compaction tool can meet a moderate noise or delay constraint with only a small increase in compacted test set size. Take the benchmark circuit s38417 for example: a 10% delay increase constraint only results in 1.6% increase in compacted test set size in our experiments. In addition, different test fill techniques have a significant impact on path delay. In our work, a test fill tool with supply noise analysis has been developed to compare several test fill techniques, and results show that the test fill strategy significant affect switching activity, power supply noise and delay. For instance, patterns with minimum transition fill produce less noise-induced delay than random fill. Silicon results also show that test patterns filled in different ways can cause as much as 14% delay variation on target paths. In conclusion, we must take noise into consideration when delay test patterns are generated

Crosstalk computing: circuit techniques, implementation and potential applications

Title from PDF of title [age viewed January 32, 2022Dissertation advisor: Mostafizur RahmanVitaIncludes bibliographical references (page 117-136)Thesis (Ph.D.)--School of Computing and Engineering. University of Missouri--Kansas City, 2020This work presents a radically new computing concept for digital Integrated Circuits (ICs), called Crosstalk Computing. The conventional CMOS scaling trend is facing device scaling limitations and interconnect bottleneck. The other primary concern of miniaturization of ICs is the signal-integrity issue due to Crosstalk, which is the unwanted interference of signals between neighboring metal lines. The Crosstalk is becoming inexorable with advancing technology nodes. Traditional computing circuits always tries to reduce this Crosstalk by applying various circuit and layout techniques. In contrast, this research develops novel circuit techniques that can leverage this detrimental effect and convert it astutely to a useful feature. The Crosstalk is engineered into a logic computation principle by leveraging deterministic signal interference for innovative circuit implementation. This research work presents a comprehensive circuit framework for Crosstalk Computing and derives all the key circuit elements that can enable this computing model. Along with regular digital logic circuits, it also presents a novel Polymorphic circuit approach unique to Crosstalk Computing. In Polymorphic circuits, the functionality of a circuit can be altered using a control variable. Owing to the multi-functional embodiment in polymorphic-circuits, they find many useful applications such as reconfigurable system design, resource sharing, hardware security, and fault-tolerant circuit design, etc. This dissertation shows a comprehensive list of polymorphic logic gate implementations, which were not reported previously in any other work. It also performs a comparison study between Crosstalk polymorphic circuits and existing polymorphic approaches, which are either inefficient due to custom non-linear circuit styles or propose exotic devices. The ability to design a wide range of polymorphic logic circuits (basic and complex logics) compact in design and minimal in transistor count is unique to Crosstalk Computing, which leads to benefits in the circuit density, power, and performance. The circuit simulation and characterization results show a 6x improvement in transistor count, 2x improvement in switching energy, and 1.5x improvement in performance compared to counterpart implementation in CMOS circuit style. Nevertheless, the Crosstalk circuits also face issues while cascading the circuits; this research analyzes all the problems and develops auxiliary circuit techniques to fix the problems. Moreover, it shows a module-level cascaded polymorphic circuit example, which also employs the auxiliary circuit techniques developed. For the very first time, it implements a proof-of-concept prototype Chip for Crosstalk Computing at TSMC 65nm technology and demonstrates experimental evidence for runtime reconfiguration of the polymorphic circuit. The dissertation also explores the application potentials for Crosstalk Computing circuits. Finally, the future work section discusses the Electronic Design Automation (EDA) challenges and proposes an appropriate design flow; besides, it also discusses ideas for the efficient implementation of Crosstalk Computing structures. Thus, further research and development to realize efficient Crosstalk Computing structures can leverage the comprehensive circuit framework developed in this research and offer transformative benefits for the semiconductor industry.Introduction and Motivation -- More Moore and Relevant Beyond CMOS Research Directions -- Crosstalk Computing -- Crosstalk Circuits Based on Perception Model -- Crosstalk Circuit Types -- Cascading Circuit Issues and Sollutions -- Existing Polymorphic Circuit Approaches -- Crosstalk Polymorphic Circuits -- Comparison and Benchmarking of Crosstalk Gates -- Practical Realization of Crosstalk Gates -- Poential Applications -- Conclusion and Future Wor

On Fault Tolerance Methods for Networks-on-Chip

Technology scaling has proceeded into dimensions in which the reliability of manufactured devices is becoming endangered. The reliability decrease is a consequence of physical limitations, relative increase of variations, and decreasing noise margins, among others. A promising solution for bringing the reliability of circuits back to a desired level is the use of design methods which introduce tolerance against possible faults in an integrated circuit. This thesis studies and presents fault tolerance methods for network-onchip (NoC) which is a design paradigm targeted for very large systems-onchip. In a NoC resources, such as processors and memories, are connected to a communication network; comparable to the Internet. Fault tolerance in such a system can be achieved at many abstraction levels. The thesis studies the origin of faults in modern technologies and explains the classification to transient, intermittent and permanent faults. A survey of fault tolerance methods is presented to demonstrate the diversity of available methods. Networks-on-chip are approached by exploring their main design choices: the selection of a topology, routing protocol, and flow control method. Fault tolerance methods for NoCs are studied at different layers of the OSI reference model. The data link layer provides a reliable communication link over a physical channel. Error control coding is an efficient fault tolerance method especially against transient faults at this abstraction level. Error control coding methods suitable for on-chip communication are studied and their implementations presented. Error control coding loses its effectiveness in the presence of intermittent and permanent faults. Therefore, other solutions against them are presented. The introduction of spare wires and split transmissions are shown to provide good tolerance against intermittent and permanent errors and their combination to error control coding is illustrated. At the network layer positioned above the data link layer, fault tolerance can be achieved with the design of fault tolerant network topologies and routing algorithms. Both of these approaches are presented in the thesis together with realizations in the both categories. The thesis concludes that an optimal fault tolerance solution contains carefully co-designed elements from different abstraction levelsSiirretty Doriast

On Co-Optimization Of Constrained Satisfiability Problems For Hardware Software Applications

Manufacturing technology has permitted an exponential growth in transistor count and density. However, making efficient use of the available transistors in the design has become exceedingly difficult. Standard design flow involves synthesis, verification, placement and routing followed by final tape out of the design. Due to the presence of various undesirable effects like capacitive crosstalk, supply noise, high temperatures, etc., verification/validation of the design has become a challenging problem. Therefore, having a good design convergence may not be possible within the target time, due to a need for a large number of design iterations. Capacitive crosstalk is one of the major causes of design convergence problems in deep sub-micron era. With scaling, the number of crosstalk violations has been increasing because of reduced inter-wire distances. Consequently only the most severe crosstalk faults are fixed pre-silicon while the rest are tested post-silicon. Testing for capacitive crosstalk involves generation of input patterns which can be applied post-silicon to the integrated circuit and comparison of the output response. These patterns are generated at the gate/ Register Transfer Level (RTL) of abstraction using Automatic Test Pattern Generation (ATPG) tools. In this dissertation, anInteger Linear Programming (ILP) based ATPG technique for maximizing crosstalk induced delay increase at the victim net, for multiple aggressor crosstalk faults, is presented. Moreover, various solutions for pattern generation considering both zero as well as unit delay models is also proposed. With voltage scaling, power supply switching noise has become one of the leading causes of signal integrity related failures in deep sub-micron designs. Hence, during power supply network design and analysis of power supply switching noise, computation of peak supply current is an essential step. Traditional peak current estimation approaches involve addition of peak current associated with all the CMOS gates which are switching in a combinational circuit. Consequently, this approach does not take the Boolean and temporal relationships of the circuit into account. This work presents an ILP based technique for generation of an input pattern pair which maximizes switching supply currents for a combinational circuit in the presence of integer gate delays. The input pattern pair generated using the above approach can be applied post-silicon for power droop testing. With high level of integration, Multi-Processor Systems on Chip (MPSoC) feature multiple processor cores and accelerators on the same die, so as to exploit the instruction level parallelism in the application. For hardware-software co-design, application programming model is based on a Task Graph, which represents task dependencies and execution/transfer times for various threads and processes within an application. Mapping an application to an MPSoC traditionally involves representing it in the form of a task graph and employing static scheduling in order to minimize the schedule length. Dynamic system behavior is not taken into consideration during static scheduling, while dynamic scheduling requires the knowledge of task graph at runtime. A run-time task graph extraction heuristic to facilitate dynamic scheduling is also presented here. A novel game theory based approach uses this extracted task graph to perform run-time scheduling in order to minimize total schedule length. With increase in transistor density, power density has gone up substantially. This has lead to generation of regions with very high temperature called Hotspots. Hotspots lead to reliability and performance issues and affect design convergence. In current generation Integrated Circuits (ICs) temperature is controlled by reducing power dissipation using Dynamic Thermal Management (DTM) techniques like frequency and/or voltage scaling. These techniques are reactive in nature and have detrimental effects on performance. Here, a look-ahead based task migration technique is proposed, in order to utilize the multitude of cores available in an MPSoC to eliminate thermal emergencies. Our technique is based on temperature prediction, leveraging upon a novel wavelet based thermal modeling approach. Hence, this work addresses several optimization problems that can be reduced to constrained max-satisfiability, involving integer as well as Boolean constraints in hardware and software domains. Moreover, it provides domain specific heuristic solutions for each of them

Algorithms for Power Aware Testing of Nanometer Digital ICs

At-speed testing of deep-submicron digital very large scale integrated (VLSI) circuits has become mandatory to catch small delay defects. Now, due to continuous shrinking of complementary metal oxide semiconductor (CMOS) transistor feature size, power density grows geometrically with technology scaling. Additionally, power dissipation inside a digital circuit during the testing phase (for test vectors under all fault models (Potluri, 2015)) is several times higher than its power dissipation during the normal functional phase of operation. Due to this, the currents that flow in the power grid during the testing phase, are much higher than what the power grid is designed for (the functional phase of operation). As a result, during at-speed testing, the supply grid experiences unacceptable supply IR-drop, ultimately leading to delay failures during at-speed testing. Since these failures are specific to testing and do not occur during functional phase of operation of the chip, these failures are usually referred to false failures, and they reduce the yield of the chip, which is undesirable. In nanometer regime, process parameter variations has become a major problem. Due to the variation in signalling delays caused by these variations, it is important to perform at-speed testing even for stuck faults, to reduce the test escapes (McCluskey and Tseng, 2000; Vorisek et al., 2004). In this context, the problem of excessive peak power dissipation causing false failures, that was addressed previously in the context of at-speed transition fault testing (Saxena et al., 2003; Devanathan et al., 2007a,b,c), also becomes prominent in the context of at-speed testing of stuck faults (Maxwell et al., 1996; McCluskey and Tseng, 2000; Vorisek et al., 2004; Prabhu and Abraham, 2012; Potluri, 2015; Potluri et al., 2015). It is well known that excessive supply IR-drop during at-speed testing can be kept under control by minimizing switching activity during testing (Saxena et al., 2003). There is a rich collection of techniques proposed in the past for reduction of peak switching activity during at-speed testing of transition/delay faults ii in both combinational and sequential circuits. As far as at-speed testing of stuck faults are concerned, while there were some techniques proposed in the past for combinational circuits (Girard et al., 1998; Dabholkar et al., 1998), there are no techniques concerning the same for sequential circuits. This thesis addresses this open problem. We propose algorithms for minimization of peak switching activity during at-speed testing of stuck faults in sequential digital circuits under the combinational state preservation scan (CSP-scan) architecture (Potluri, 2015; Potluri et al., 2015). First, we show that, under this CSP-scan architecture, when the test set is completely specified, the peak switching activity during testing can be minimized by solving the Bottleneck Traveling Salesman Problem (BTSP). This mapping of peak test switching activity minimization problem to BTSP is novel, and proposed for the first time in the literature. Usually, as circuit size increases, the percentage of don’t cares in the test set increases. As a result, test vector ordering for any arbitrary filling of don’t care bits is insufficient for producing effective reduction in switching activity during testing of large circuits. Since don’t cares dominate the test sets for larger circuits, don’t care filling plays a crucial role in reducing switching activity during testing. Taking this into consideration, we propose an algorithm, XStat, which is capable of performing test vector ordering while preserving don’t care bits in the test vectors, following which, the don’t cares are filled in an intelligent fashion for minimizing input switching activity, which effectively minimizes switching activity inside the circuit (Girard et al., 1998). Through empirical validation on benchmark circuits, we show that XStat minimizes peak switching activity significantly, during testing. Although XStat is a very powerful heuristic for minimizing peak input-switchingactivity, it will not guarantee optimality. To address this issue, we propose an algorithm that uses Dynamic Programming to calculate the lower bound for a given sequence of test vectors, and subsequently uses a greedy strategy for filling don’t cares in this sequence to achieve this lower bound, thereby guaranteeing optimality. This algorithm, which we refer to as DP-fill in this thesis, provides the globally optimal solution for minimizing peak input-switching-activity and also is the best known in the literature for minimizing peak input-switching-activity during testing. The proof of optimality of DP-fill in minimizing peak input-switching-activity is also provided in this thesis

Design and modelling of variability tolerant on-chip communication structures for future high performance system on chip designs

The incessant technology scaling has enabled the integration of functionally complex System-on-Chip (SoC) designs with a large number of heterogeneous systems on a single chip. The processing elements on these chips are integrated through on-chip communication structures which provide the infrastructure necessary for the exchange of data and control signals, while meeting the strenuous physical and design constraints. The use of vast amounts of on chip communications will be central to future designs where variability is an inherent characteristic. For this reason, in this thesis we investigate the performance and variability tolerance of typical on-chip communication structures. Understanding of the relationship between variability and communication is paramount for the designers; i.e. to devise new methods and techniques for designing performance and power efficient communication circuits in the forefront of challenges presented by deep sub-micron (DSM) technologies. The initial part of this work investigates the impact of device variability due to Random Dopant Fluctuations (RDF) on the timing characteristics of basic communication elements. The characterization data so obtained can be used to estimate the performance and failure probability of simple links through the methodology proposed in this work. For the Statistical Static Timing Analysis (SSTA) of larger circuits, a method for accurate estimation of the probability density functions of different circuit parameters is proposed. Moreover, its significance on pipelined circuits is highlighted. Power and area are one of the most important design metrics for any integrated circuit (IC) design. This thesis emphasises the consideration of communication reliability while optimizing for power and area. A methodology has been proposed for the simultaneous optimization of performance, area, power and delay variability for a repeater inserted interconnect. Similarly for multi-bit parallel links, bandwidth driven optimizations have also been performed. Power and area efficient semi-serial links, less vulnerable to delay variations than the corresponding fully parallel links are introduced. Furthermore, due to technology scaling, the coupling noise between the link lines has become an important issue. With ever decreasing supply voltages, and the corresponding reduction in noise margins, severe challenges are introduced for performing timing verification in the presence of variability. For this reason an accurate model for crosstalk noise in an interconnection as a function of time and skew is introduced in this work. This model can be used for the identification of skew condition that gives maximum delay noise, and also for efficient design verification

Design-for-delay-testability techniques for high-speed digital circuits

The importance of delay faults is enhanced by the ever increasing clock rates and decreasing geometry sizes of nowadays' circuits. This thesis focuses on the development of Design-for-Delay-Testability (DfDT) techniques for high-speed circuits and embedded cores. The rising costs of IC testing and in particular the costs of Automatic Test Equipment are major concerns for the semiconductor industry. To reverse the trend of rising testing costs, DfDT is\ud getting more and more important