Efficient implementation of elliptic curve cryptography.

Elliptic Curve Cryptosystems (ECC) were introduced in 1985 by Neal Koblitz and Victor Miller. Small key size made elliptic curve attractive for public key cryptosystem implementation. This thesis introduces solutions of efficient implementation of ECC in algorithmic level and in computation level. In algorithmic level, a fast parallel elliptic curve scalar multiplication algorithm based on a dual-processor hardware system is developed. The method has an average computation time of n3 Elliptic Curve Point Addition on an n-bit scalar. The improvement is n Elliptic Curve Point Doubling compared to conventional methods. When a proper coordinate system and binary representation for the scalar k is used the average execution time will be as low as n Elliptic Curve Point Doubling, which makes this method about two times faster than conventional single processor multipliers using the same coordinate system. In computation level, a high performance elliptic curve processor (ECP) architecture is presented. The processor uses parallelism in finite field calculation to achieve high speed execution of scalar multiplication algorithm. The architecture relies on compile-time detection rather than of run-time detection of parallelism which results in less hardware. Implemented on FPGA, the proposed processor operates at 66MHz in GF(2 167) and performs scalar multiplication in 100muSec, which is considerably faster than recent implementations.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2004 .A57. Source: Masters Abstracts International, Volume: 44-03, page: 1446. Thesis (M.A.Sc.)--University of Windsor (Canada), 2005

Efficient Implementation on Low-Cost SoC-FPGAs of TLSv1.2 Protocol with ECC_AES Support for Secure IoT Coordinators

Security management for IoT applications is a critical research field, especially when taking into account the performance variation over the very different IoT devices. In this paper, we present high-performance client/server coordinators on low-cost SoC-FPGA devices for secure IoT data collection. Security is ensured by using the Transport Layer Security (TLS) protocol based on the TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 cipher suite. The hardware architecture of the proposed coordinators is based on SW/HW co-design, implementing within the hardware accelerator core Elliptic Curve Scalar Multiplication (ECSM), which is the core operation of Elliptic Curve Cryptosystems (ECC). Meanwhile, the control of the overall TLS scheme is performed in software by an ARM Cortex-A9 microprocessor. In fact, the implementation of the ECC accelerator core around an ARM microprocessor allows not only the improvement of ECSM execution but also the performance enhancement of the overall cryptosystem. The integration of the ARM processor enables to exploit the possibility of embedded Linux features for high system flexibility. As a result, the proposed ECC accelerator requires limited area, with only 3395 LUTs on the Zynq device used to perform high-speed, 233-bit ECSMs in 413 µs, with a 50 MHz clock. Moreover, the generation of a 384-bit TLS handshake secret key between client and server coordinators requires 67.5 ms on a low cost Zynq 7Z007S device

Reconfigurable elliptic curve cryptography

Elliptic Curve Cryptosystems (ECC) have been proposed as an alternative to other established public key cryptosystems such as RSA (Rivest Shamir Adleman). ECC provide more security per bit than other known public key schemes based on the discrete logarithm problem. Smaller key sizes result in faster computations, lower power consumption and memory and bandwidth savings, thus making ECC a fast, flexible and cost-effective solution for providing security in constrained environments. Implementing ECC on reconfigurable platform combines the speed, security and concurrency of hardware along with the flexibility of the software approach. This work proposes a generic architecture for elliptic curve cryptosystem on a Field Programmable Gate Array (FPGA) that performs an elliptic curve scalar multiplication in 1.16milliseconds for GF (2163), which is considerably faster than most other documented implementations. One of the benefits of the proposed processor architecture is that it is easily reprogrammable to use different algorithms and is adaptable to any field order. Also through reconfiguration the arithmetic unit can be optimized for different area/speed requirements. The mathematics involved uses binary extension field of the form GF (2n) as the underlying field and polynomial basis for the representation of the elements in the field. A significant gain in performance is obtained by using projective coordinates for the points on the curve during the computation process

Hardware implementation of elliptic curve Diffie-Hellman key agreement scheme in GF(p)

With the advent of technology there are many applications that require secure communication. Elliptic Curve Public-key Cryptosystems are increasingly becoming popular due to their small key size and efficient algorithm. Elliptic curves are widely used in various key exchange techniques including Diffie-Hellman Key Agreement scheme. Modular multiplication and modular division are one of the basic operations in elliptic curve cryptography. Much effort has been made in developing efficient modular multiplication designs, however few works has been proposed for the modular division. Nevertheless, these operations are needed in various cryptographic systems. This thesis examines various scalable implementations of elliptic curve scalar multiplication employing multiplicative inverse or field division in GF(p) focussing mainly on modular divison architectures. Next, this thesis presents a new architecture for modular division based on the variant of Extended Binary GCD algorithm. The main contribution at system level architecture to the modular division unit is use of counters in place of shift registers that are basis of the algorithm and modifying the algorithm to introduce a modular correction unit for the output logic. This results in 62% increase in speed with respect to a prototype design. Finally, using the modular division architecture an Elliptic Curve ALU in GF(p) was implemented which can be used as the core arithmetic unit of an elliptic curve processor. The resulting architecture was targeted to Xilinx Vertex2v6000-bf957 FPGA device and can be implemented for different elliptic curves for almost all practical values of field p. The frequency of the ALU is 58.8 MHz for 128-bits utilizing 20% of the device at 27712 gates which is 30% faster than a prototype implementation with a 2% increase in area utilization. The ALU was tested to perform Diffie-Hellman Key Agreement Scheme and is suitable for other public-key cryptographic algorithms

Private and Public-Key Side-Channel Threats Against Hardware Accelerated Cryptosystems

Modern side-channel attacks (SCA) have the ability to reveal sensitive data from non-protected hardware implementations of cryptographic accelerators whether they be private or public-key systems. These protocols include but are not limited to symmetric, private-key encryption using AES-128, 192, 256, or public-key cryptosystems using elliptic curve cryptography (ECC). Traditionally, scalar point (SP) operations are compelled to be high-speed at any cost to reduce point multiplication latency. The majority of high-speed architectures of contemporary elliptic curve protocols rely on non-secure SP algorithms. This thesis delivers a novel design, analysis, and successful results from a custom differential power analysis attack on AES-128. The resulting SCA can break any 16-byte master key the sophisticated cipher uses and it\u27s direct applications towards public-key cryptosystems will become clear. Further, the architecture of a SCA resistant scalar point algorithm accompanied by an implementation of an optimized serial multiplier will be constructed. The optimized hardware design of the multiplier is highly modular and can use either NIST approved 233 & 283-bit Kobliz curves utilizing a polynomial basis. The proposed architecture will be implemented on Kintex-7 FPGA to later be integrated with the ARM Cortex-A9 processor on the Zynq-7000 AP SoC (XC7Z045) for seamless data transfer and analysis of the vulnerabilities SCAs can exploit