Development of a Portable CMOS Time-Domain Fluorescence Lifetime Imager

Modern laboratory equipments to measure the excited-state lifetime of fluorophores usually include an expensive picosecond pulsed-laser excitation source, a fragile photomultiplier tube, and a large instrument body for optics. A portable and robust device to make fluorescence lifetime measurement in nanosecond scale is of great attraction for chemists and biologists. This dissertation reports the development of a portable LED time-domain fluorimeter from an all-solid-state discrete-component prototype to its advanced CMOS integrated circuit implementation. The motivation of the research is to develop a multiplexed fluorimeter for point-of-care diagnosis. Instruments developed by this novel method have higher fill factor, are more portable, and are fabricated at lower cost

Study and development of a fluorescence based sensor system for monitoring oxygen in wine production: The WOW project

The importance of oxygen in the winemaking process is widely known, as it affects the chemical aspects and therefore the organoleptic characteristics of the final product. Hence, it is evident the usefulness of a continuous and real-time measurements of the levels of oxygen in the various stages of the winemaking process, both for monitoring and for control. The WOW project (Deployment of WSAN technology for monitoring Oxygen in Wine products) has focused on the design and the development of an innovative device for monitoring the oxygen levels in wine. This system is based on the use of an optical fiber to measure the luminescent lifetime variation of a reference metal/porphyrin complex, which decays in presence of oxygen. The developed technology results in a high sensitivity and low cost sensor head that can be employed for measuring the dissolved oxygen levels at several points inside a wine fermentation or aging tank. This system can be complemented with dynamic modeling techniques to provide predictive behavior of the nutrient evolution in space and time given few sampled measuring points, for both process monitoring and control purposes. The experimental validation of the technology has been first performed in a controlled laboratory setup to attain calibration and study sensitivity with respect to different photo-luminescent compounds and alcoholic or non-alcoholic solutions, and then in an actual case study during a measurement campaign at a renown Italian winery

Light-emitting diodes and photodiodes in the deep ultra-violet range for absorption photometry in liquid chromatography, capillary electrophoresis and gas sensing

Absorbance measurement in the deep ultra-violet range (below 300 nm) has been one of the most widely used detection methods for analytical techniques as a large number of organic compounds have strong absorption bands in the deep UV region. The use of incandescent or discharge lamps coupled to a monochromator for the wavelength selection in a conventional UV detector makes it complex and costly. Light-emitting diodes (LEDs) for the deep UV range commercially available in recent years have become potential alternatives to thermal light sources. LEDs with their relatively narrow emission bandwidths (typically 20 nm) are well suited for absorption photometry in which a monochromator is not required. This dissertation, therefore, concerns the utilization LEDs and photodiodes (PDs) in the deep UV range as radiation sources and light detectors, respectively for absorption photometry in high-performance liquid chromatography (HPLC), capillary electrophoresis (CE) and gas sensing. LEDs were known to perform as light detectors. In measuring systems based on LEDs as light sources, PDs have been normally employed for detection devices. The practical reasons for the use of LEDs as alternatives to PDs, however, have not been demonstrated. Only an advantage of cost-saving was pointed out. In the first project, the performance of LEDs in the light intensity measurement was investigated and compared to that of standard silicon PDs in three different measuring configurations: current follower mode to measure to photocurrents, photovoltaic mode to determine the voltage developed across the diode on irradiation without load and discharge time mode to measure the rate to discharge the junction capacitance of diodes. LEDs as detectors were generally found to be adequate for the analytical work but PDs offered higher sensitivity and linearity as well as provided stable readings with faster settling times. Absorbance detectors for narrow-column HPLC (250 μm inner diameter) and CE (50 μm inner diameter) based on deep UV-LEDs and PDs selective for emission wavelengths were developed and evaluated in the quantification of model compounds at 255 and 280 nm. Absorbance measurements were directly obtained by the use of a beam splitter and PDs for reference signals and a logarithmic ratio amplifier-based circuitry to emulate the Lambert-Beer’s law. Narrow-column HPLC is useful for the applications in which the reduction in eluent consumption is desired or only limited amount of samples is available when utmost sensitivity is not required. In CE, the use of a capillary as the separation channel to minimize the peak broadening downscales the detection window to micrometer range which is even much narrower than that of a narrow-bore HPLC. This makes the design and construction of these LED-based detectors for narrow detection channels more challenging than for a standard HPLC as the higher efficiency for light coupling and stray light avoidance is essentially required. Additionally, high mechanical stability is needed to minimize the noise resulted from mechanical fluctuations. The performance of these optical devices at two measured wavelengths was excellent in terms of the baseline noise (low μAU range), linearity between absorbance values and concentrations (correlation coefficients > 0.999) and reproducibility of peak areas (about 1%). Not only was the potential of a deep UV-LED as a radiation source for absorption spectroscopy investigated for separation techniques but also for the detection of benzene, toluene, ethylbenzene and the xylenes compounds in the gas phase at 260 nm. In the first part of this work, its performance in the acoustic waves excitation was preliminarily investigated with some different measuring systems for the detection of the toluene vapor. It was found that the intensity of a deep UV-LED was insufficient to produce detectable acoustic signals. This was followed by the construction of an absorbance detector for the determination of these target compounds based on the combination of a deep UV-LED and PDs. This optical device was designed to use optical fibers for the light coupling from the LED to a measuring cell and a reference PD, that allows removing a beam splitter previously required for detectors of a narrow column HPLC and CE. Its performance with regard to linearity and reproducibility was satisfactory. Detection limits of about 1 ppm were determined. It could be concluded that viable absorbance detectors for narrow-column HPLC, CE and gas sensing based on deep UV-LEDs and PDs as light sources and light detectors, respectively can be constructed. The performance of these inexpensive LED-based optical devices with regard to linearity, reproducibility and baseline noise was satisfactory and found to be comparable to that of more complex and expensive commercial detectors. These detectors with features of low power consumption and small size are useful for portable battery-powered devices

Photodetectors

In this book some recent advances in development of photodetectors and photodetection systems for specific applications are included. In the first section of the book nine different types of photodetectors and their characteristics are presented. Next, some theoretical aspects and simulations are discussed. The last eight chapters are devoted to the development of photodetection systems for imaging, particle size analysis, transfers of time, measurement of vibrations, magnetic field, polarization of light, and particle energy. The book is addressed to students, engineers, and researchers working in the field of photonics and advanced technologies

An Optical-Fiber Based Sensor Array for the Simultaneous Analysis of Zinc and Copper in Aqueous Environments

Copper and zinc are elements commonly used in industrial applications, with many of these processes using these elements in aqueous environments. Before the solutions can be discharged into civil or native waterways, waste treatment processes must be undertaken to ensure compliance with federal, state and local guidelines restricting the concentration of ions discharged in solution. While there are methods of analysis currently available to monitor these solutions, each method has disadvantages, be it that they are cost prohibitive, inaccurate, and/or time-consuming. In this work, a new optical fiber-based platform capable of providing fast and accurate results when performing solution analysis for these metals is described. Using fluorescent compounds that exhibit a high sensitivity and selectivity for either zinc or copper have been employed for fabricating the sensors. These sensors demonstrated sub-part-per-million detection limits, 30-second response times, and the ability to analyze samples with an average error of under 10%. The inclusion of a fluorescent compound acting as a reference material to compensate for fluctuations from pulsed excitation sources has further increased the reliability and accuracy of each sensor. Finally, after developing sensors capable of monitoring zinc and copper individually, these sensors can be combined to form a single optical fiber sensor array capable of simultaneously monitoring concentration changes in zinc and copper in aqueous environments