SRAM Read-Assist Scheme for Low Power High Performance Applications

Semiconductor technology scaling resulted in a considerable reduction in the transistor cost and an astonishing enhancement in the performance of VLSI (very large scale integration) systems. These nanoscale technologies have facilitated integration of large SRAMs which are now very popular for both processors and system-on-chip (SOC) designs. The density of SRAM array had a quadratic increase with each generation of CMOS technology. However, these nanoscale technologies unveiled few significant challenges to the design of high performance and low power embedded memories. First, process variation has become more significant in these technologies which threaten reliability of sensing circuitry. In order to alleviate this problem, we need to have larger signal swings on the bitlines (BLs) which degrade speed as well as power dissipation. The second challenge is due to the variation in the cell current which will reduce the worst case cell current. Since this cell current is responsible for discharging BLs, this problem will translate to longer activation time for the wordlines (WLs). The longer the WL pulse width is, the more likely is the cell to be unstable. A long WL pulse width can also degrade noise margin. Furthermore, as a result of continuous increase in the size of SRAMs, the BL capacitance has increased significantly which will deteriorate speed as well as power dissipation. The aforementioned problems require additional techniques and treatment such as read-assist techniques to insure fast, low power and reliable read operation in nanoscaled SRAMs. In this research we address these concerns and propose a read-assist sense amplifier (SA) in 65nm CMOS technology that expedites the process of developing differential voltage to be sensed by sense amplifier while reducing voltage swing on the BLs which will result in increased sensing speed, lower power and shorter WL activation time. A complete comparison is made between the proposed scheme, conventional SA and a state of the art design which shows speed improvement and power reduction of 56.1% and 25.9%, respectively over the conventional scheme at the expense of negligible area overhead. Also, the proposed scheme enables us to reduce cell VDD for having the same sensing speed which results in considerable reduction in leakage power dissipation

Design of Low-Voltage Digital Building Blocks and ADCs for Energy-Efficient Systems

Increasing number of energy-limited applications continue to drive the demand for designing systems with high energy efficiency. This tutorial covers the main building blocks of a system implementation including digital logic, embedded memories, and analog-to-digital converters and describes the challenges and solutions to designing these blocks for low-voltage operation

Reconfigurable nanoelectronics using graphene based spintronic logic gates

This paper presents a novel design concept for spintronic nanoelectronics that emphasizes a seamless integration of spin-based memory and logic circuits. The building blocks are magneto-logic gates based on a hybrid graphene/ferromagnet material system. We use network search engines as a technology demonstration vehicle and present a spin-based circuit design with smaller area, faster speed, and lower energy consumption than the state-of-the-art CMOS counterparts. This design can also be applied in applications such as data compression, coding and image recognition. In the proposed scheme, over 100 spin-based logic operations are carried out before any need for a spin-charge conversion. Consequently, supporting CMOS electronics requires little power consumption. The spintronic-CMOS integrated system can be implemented on a single 3-D chip. These nonvolatile logic circuits hold potential for a paradigm shift in computing applications.Comment: 14 pages (single column), 6 figure

A Novel variation-tolerant 9T SRAM design for nanoscale CMOS

As the feature sizes decrease, understanding manufacturing variations becomes essential to effectively design robust circuits. Manufacturing variations occur when process parameters deviate from their ideal or expected values, resulting in variations in device characteristics. Variations in the device characteristics cause the circuit to deviate from its expected behavior resulting in circuit instability, performance degradation, and yield loss. Both from an economic and performance standpoint, the yield and performance of Static Random Access Memories (SRAMs) are of great importance to the modern System-on-Chip designs. SRAM bitcells typically employ well-matched, minimum-sized transistors which make them highly sensitive to process variations. To overcome these challenges, researchers have proposed different topologies for SRAMs with 8T and 10T SRAM designs. These designs improve the cell stability but suffer from bitline-leakage noise, placing constraints on the number of cells shared by each bitline. These designs also have substantial area overhead when compared to the traditional 6T design. In this work, the published SRAM designs are characterized using commercial CMOS 65 nm models and are compared based on critical SRAM parameters like read stability, write stability, bitline leakage and the impact of process variations. Furthermore, a single-ended 9T SRAM design is proposed that enhances data stability and simultaneously addresses the bitline leakage problem. The proposed design also satisfies the yield criterion to achieve 90% yield for a 1Mb SRAM array in the presence of process variations

Design and modelling of different SRAM's based on CNTFET 32nm technology

Carbon nanotube field-effect transistor (CNTFET) refers to a field-effect transistor that utilizes a single carbon nanotube or an array of carbon nanotubes as the channel material instead of bulk silicon in the traditional MOSFET structure. Since it was first demonstrated in 1998, there have been tremendous developments in CNTFETs, which promise for an alternative material to replace silicon in future electronics. Carbon nanotubes are promising materials for the nano-scale electron devices such as nanotube FETs for ultra-high density integrated circuits and quantum-effect devices for novel intelligent circuits, which are expected to bring a breakthrough in the present silicon technology. A Static Random Access Memory (SRAM) is designed to plug two needs: i) The SRAM provides as cache memory, communicating between central processing unit and Dynamic Random Access Memory (DRAM). ii) The SRAM technology act as driving force for low power application since SRAM is portable compared to DRAM, and SRAM doesn't require any refresh current. On the basis of acquired knowledge, we present different SRAM's designed for the conventional CNTFET. HSPICE simulations of this circuit using Stanford CNTFET model shows a great improvement in power saving.Comment: 15 Page

A PUF based Lightweight Hardware Security Architecture for IoT

With an increasing number of hand-held electronics, gadgets, and other smart devices, data is present in a large number of platforms, thereby increasing the risk of security, privacy, and safety breach than ever before. Due to the extreme lightweight nature of these devices, commonly referred to as IoT or `Internet of Things\u27, providing any kind of security is prohibitive due to high overhead associated with any traditional and mathematically robust cryptographic techniques. Therefore, researchers have searched for alternative intuitive solutions for such devices. Hardware security, unlike traditional cryptography, can provide unique device-specific security solutions with little overhead, address vulnerability in hardware and, therefore, are attractive in this domain. As Moore\u27s law is almost at its end, different emerging devices are being explored more by researchers as they present opportunities to build better application-specific devices along with their challenges compared to CMOS technology. In this work, we have proposed emerging nanotechnology-based hardware security as a security solution for resource constrained IoT domain. Specifically, we have built two hardware security primitives i.e. physical unclonable function (PUF) and true random number generator (TRNG) and used these components as part of a security protocol proposed in this work as well. Both PUF and TRNG are built from metal-oxide memristors, an emerging nanoscale device and are generally lightweight compared to their CMOS counterparts in terms of area, power, and delay. Design challenges associated with designing these hardware security primitives and with memristive devices are properly addressed. Finally, a complete security protocol is proposed where all of these different pieces come together to provide a practical, robust, and device-specific security for resource-limited IoT systems

-Memory Computing Based Reliable and High Speed Schmitt trigger 10T SRAM cell design

Static random access memories (SRAM) are useful building blocks in various applications, including cache memories, integrated data storage systems, and microprocessors. The von Neumann bottleneck difficulties are solved by in-memory computing. It eliminates unnecessary frequent data transfer between memory and processing units simultaneously. In this research, the replica-based 10T SRAM design for in-memory computing (IMC) is designed by adapting the word line control scheme in 14nm CMOS technology. In order to achieve high reading and writing capability, the Schmitt trigger inverter was used for energy-saving and stable use. To speed up the writing process of the design, a single transistor is inserted between the cross-coupled inverters. In addition, to increase the node capacity, the voltage boosting circuitry is emphasized. The adaptive word line control scheme was utilized by integrating the replica column based circuit. The Replica approach regulates signal flow through the core by using a dummy column and a dummy row in RAM. To demonstrate the viability of the suggested design, the simulated outcomes are contrasted with those of existing designs. The various performance metrics examined are Read Static Noise Margin (RSNM), Write (WSNM), Hold (HSNM), Read Access Delay (RAD), Write Access Delay (WAD), Read performance and Write performance the varying supply voltage is evaluated

Modeling and Mitigation of Soft Errors in Nanoscale SRAMs

Energetic particle (alpha particle, cosmic neutron, etc.) induced single event data upset or soft error has emerged as a key reliability concern in SRAMs in sub-100 nanometre technologies. Low operating voltage, small node capacitance, high packing density, and lack of error masking mechanisms are primarily responsible for the soft error susceptibility of SRAMs. In addition, since SRAM occupies the majority of die area in system-on-chips (SoCs) and microprocessors, different leakage reduction techniques, such as, supply voltage reduction, gated grounding, etc., are applied to SRAMs in order to limit the overall chip leakage. These leakage reduction techniques exponentially increase the soft error rate in SRAMs. The soft error rate is further accentuated by process variations, which are prominent in scaled-down technologies. In this research, we address these concerns and propose techniques to characterize and mitigate soft errors in nanoscale SRAMs. We develop a comprehensive analytical model of the critical charge, which is a key to assessing the soft error susceptibility of SRAMs. The model is based on the dynamic behaviour of the cell and a simple decoupling technique for the non-linearly coupled storage nodes. The model describes the critical charge in terms of NMOS and PMOS transistor parameters, cell supply voltage, and noise current parameters. Consequently, it enables characterizing the spread of critical charge due to process induced variations in these parameters and to manufacturing defects, such as, resistive contacts or vias. In addition, the model can estimate the improvement in critical charge when MIM capacitors are added to the cell in order to improve the soft error robustness. The model is validated by SPICE simulations (90nm CMOS) and radiation test. The critical charge calculated by the model is in good agreement with SPICE simulations with a maximum discrepancy of less than 5%. The soft error rate estimated by the model for low voltage (sub 0.8 V) operations is within 10% of the soft error rate measured in the radiation test. Therefore, the model can serve as a reliable alternative to time consuming SPICE simulations for optimizing the critical charge and hence the soft error rate at the design stage. In order to limit the soft error rate further, we propose an area-efficient multiword based error correction code (MECC) scheme. The MECC scheme combines four 32 bit data words to form a composite 128 bit ECC word and uses an optimized 4-input transmission-gate XOR logic. Thus MECC significantly reduces the area overhead for check-bit storage and the delay penalty for error correction. In addition, MECC interleaves two composite words in a row for limiting cosmic neutron induced multi-bit errors. The ground potentials of the composite words are controlled to minimize leakage power without compromising the read data stability. However, use of composite words involves a unique write operation where one data word is written while other three data words are read to update the check-bits. A power efficient word line signaling technique is developed to facilitate the write operation. A 64 kb SRAM macro with MECC is designed and fabricated in a commercial 90nm CMOS technology. Measurement results show that the SRAM consumes 534 μW at 100 MHz with a data latency of 3.3 ns for a single bit error correction. This translates into 82% per-bit energy saving and 8x speed improvement over recently reported multiword ECC schemes. Accelerated neutron radiation test carried out at TRIUMF in Vancouver confirms that the proposed MECC scheme can correct up to 85% of soft errors