A 1.2-V 10- µW NPN-Based Temperature Sensor in 65-nm CMOS With an Inaccuracy of 0.2 °C (3σ) From 70 °C to 125 °C

An NPN-based temperature sensor with digital output transistors has been realized in a 65-nm CMOS process. It achieves a batch-calibrated inaccuracy of ±0.5 ◦C (3¾) and a trimmed inaccuracy of ±0.2 ◦C (3¾) over the temperature range from −70 ◦C to 125 ◦C. This performance is obtained by the use of NPN transistors as sensing elements, the use of dynamic techniques, i.e. correlated double sampling and dynamic element matching, and a single room-temperature trim. The sensor draws 8.3 μA from a 1.2-V supply and occupies an area of 0.1 mm2

Design And Simulation Of Cmos-Based Bandgap Reference Voltage With Compensation Circuit Using 0.18 Μm Process Technology

Voltage reference circuit is important in electronic world nowadays. A CMOS based bandgap reference (BGR) circuit is preferred due to its size is smaller and consume less power. However, the drawback is the reference voltage variation of CMOS based BGR circuit is big in wide range of temperature, thus the temperature coefficient of it is high. Hence, an improved version of piecewise curvature-corrected Bandgap voltage reference circuit which has low voltage variation in wide range of temperature is introduced in this project to overcome the problem mentioned above. The BGR circuit is designed using CMOS compatible process in 0.18μm CMOS process technology and simulated by using Cadence tool. The proposed piecewise curvature-corrected BGR operate properly with output voltage of 558.6 mV to 558.3 mV by varying the voltage supply 1.4 V to 3.3 V at 27°C and the line regulation is 0.016% . Besides that, the best temperature coefficient obtained is 9.2 ppm/°C in the temperature range of -25°C to 150°C at 1.8 V. The PSSR of the proposed circuit is -69.91 dB at frequency less 10 kHz. The layout design of the proposed circuit is done by using Silterra 0.18 μm standard CMOS process and total die area is 0.0175 mm2 and temperature coefficient obtained in post layout simulation is 11.66ppm/°C. In short, it is found that the proposed design of BGR circuit is able to achieve high temperature range and relatively low voltage variation

A sub-1 V, 26 μw, low-output-impedance CMOS bandgap reference with a low dropout or source follower mode

We present a low-power bandgap reference (BGR), functional from sub-1 V to 5 V supply voltage with either a low dropout (LDO) regulator or source follower (SF) output stage, denoted as the LDO or SF mode, in a 0.5-μm standard digital CMOS process with V tn≈ 0.6 V and |V tp| ≈ 0.7 V at 27 °C. Both modes operate at sub-1 V under zero load with a power consumption of around 26 μW. At 1 V (1.1 V) supply, the LDO (SF) mode provides an output current up to 1.1 mA (0.35 mA), a load regulation of ±8.5 mV/mA (±33 mV/mA) with approximately 10 μ s transient, a line regulation of ±4.2 mV/V (±50μV/V), and a temperature compensated reference voltage of 0.228 V (0.235 V) with a temperature coefficient around 34 ppm/° C from -20°C to 120 °C. At 1.5 V supply, the LDO (SF) mode can further drive up to 9.6 mA (3.2 mA) before the reference voltage falls to 90% of its nominal value. Such low-supply-voltage and high-current-driving BGR in standard digital CMOS processes is highly useful in portable and switching applications. © 2010 IEEE.published_or_final_versio

An accurate, trimless, high PSRR, low-voltage, CMOS bandgap reference IC

Bandgap reference circuits are used in a host of analog, digital, and mixed-signal systems to establish an accurate voltage standard for the entire IC. The accuracy of the bandgap reference voltage under steady-state (dc) and transient (ac) conditions is critical to obtain high system performance. In this work, the impact of process, power-supply, load, and temperature variations and package stresses on the dc and ac accuracy of bandgap reference circuits has been analyzed. Based on this analysis, the a bandgap reference that 1. has high dc accuracy despite process and temperature variations and package stresses, without resorting to expensive trimming or noisy switching schemes, 2. has high dc and ac accuracy despite power-supply variations, without using large off-chip capacitors that increase bill-of-material costs, 3. has high dc and ac accuracy despite load variations, without resorting to error-inducing buffers, 4. is capable of producing a sub-bandgap reference voltage with a low power-supply, to enable it to operate in modern, battery-operated portable applications, 5. utilizes a standard CMOS process, to lower manufacturing costs, and 6. is integrated, to consume less board space has been proposed. The functionality of critical components of the system has been verified through prototypes after which the performance of the complete system has been evaluated by integrating all the individual components on an IC. The proposed CMOS bandgap reference can withstand 5mA of load variations while generating a reference voltage of 890mV that is accurate with respect to temperature to the first order. It exhibits a trimless, dc 3-sigma accuracy performance of 0.84% over a temperature range of -40°C to 125°C and has a worst case ac power-supply ripple rejection (PSRR) performance of 30dB up to 50MHz using 60pF of on-chip capacitance. All the proposed techniques lead to the development of a CMOS bandgap reference that meets the low-cost, high-accuracy demands of state-of-the-art System-on-Chip environments.Ph.D.Committee Chair: Rincon-Mora, Gabriel; Committee Member: Ayazi, Farrokh; Committee Member: Bhatti, Pamela; Committee Member: Leach, W. Marshall; Committee Member: Morley, Thoma

A low-power native NMOS-based bandgap reference operating from −55°C to 125°C with Li-Ion battery compatibility

Summary The paper describes the implementation of a bandgap reference based on native-MOSFET transistors for low-power sensor node applications. The circuit can operate from −55°C to 125°C and with a supply voltage ranging from 1.5 to 4.2 V. Therefore, it is compatible with the temperature range of automotive and military-aerospace applications, and for direct Li-Ion battery attach. Moreover, the circuit can operate without any dedicated start-up circuit, thanks to its inherent single operating point. A mathematical model of the reference circuit is presented, allowing simple portability across technology nodes, with current consumption and silicon area as design parameters. Implemented in a 55-nm CMOS technology, the voltage reference achieves a measured average (maximum) temperature coefficient of 28 ppm/°C (43 ppm/°C) and a measured sample-to-sample variation within 57 mV, with a current consumption of 420 nA at 27°C

A Low-Power Low-Voltage Bandgap Reference in CMOS

Bandgap reference plays a substantial role in integrated circuit. Traditionally, it provides a constant reference voltage of 1.2051/ for other blocks in the circuit while itself is independent of temperature and power supply. However, the development of CMOS technology has brought us into a new era of high integration and ultra-low power consumption. As the gate length scales down, it is crucial to build circuits that are able to work under a very low voltage power supply, for instance, lower than the bandgap voltage of 1.205V. Building bandgap circuits to generate the conven­ tional bandgap voltage under a low voltage power supply such as 1.2V or IV is no longer practical nor useful. Thus, bandgap references working under low-voltage and consuming low-power is becoming the trend of research and development nowadays. In this thesis work, the potential structure of a low-voltage low-power bandgap reference is proposed, which is based on extracting a current that is a fraction of the traditional bandgap voltage. All the necessary blocks are designed to achieve the high accuracy bandgap reference, including bandgap core circuit, op-amp, start-up circuit and output stage. As a result, the designed bandgap reference is able to work under 1.2V power supply and provides an output reference voltage of 584.7mV. It has a variation of only 244.38fiV for the temperature range of 0°C ~ 125°C and has a variation of only 1.1mV for a power supply range of 1.08V ~ 1.32V. The layout design for the bandgap reference structure is also done carefully at the late stage, with an area of 100fj,m x 85¡xm

A 1.8-V 4-ppm oC Reference Current with Process and Temperature

[[abstract]]A current reference generator with a proposed compensation circuit against temperature variation is presented. The current reference generator provides a reference current of 10 uA with temperature coefficient (TC) of 4 ppm/°C under temperature range from -40 to 125°C. The circuit occupies 0.008 mm2 in a 180-nm standard CMOS process.[[conferencetype]]國際[[conferencedate]]20130630~20130703[[booktype]]電子版[[iscallforpapers]]Y[[conferencelocation]]Yeosu, Kore