High-frequency modulated-backscatter communication using multiple antennas

Backscatter radio - the broad class of systems that communicate using scattered electromagnetic waves - is the driving technology behind many compelling applications such as radio frequency identification (RFID) tags and passive sensors. These systems can be used in many ways including article tracking, position location, passive temperature sensors, passive data storage, and in many other systems which require information exchange between an interrogator and a small, low-cost transponder with little-to-no transponder power consumption. Although backscatter radio is maturing, such systems have limited communication range and reliability caused, in part, by multipath fading. The research presented in this dissertation investigates how multipath fading can be reduced using multiple antennas at the interrogator transmitter, interrogator receiver, and on the transponder, or RF tag. First, two link budgets for backscatter radio are presented and fading effects demonstrated through a realistic, 915 MHz, RFID-portal example. Each term in the link budget is explained and used to illuminate the propagation and high-frequency effects that influence RF tag operation. Second, analytic envelope distributions for the M x L x N, dyadic backscatter channel - the general channel in which a backscatter system with M transmitter, L RF tag, and N receiver antennas operates - are derived. The distributions show that multipath fading can be reduced using multiple-antenna RF tags and by using separate transmitter and receiver antenna arrays at the interrogator. These results are verified by fading measurements of the M x L x N, dyadic backscatter channel at 5.8 GHz - the center of the 5725-5850 MHz unlicensed industrial, scientific, and medical (ISM) frequency band that offers reduced antenna size, increased antenna gain, and, in some cases, reduced object attachment losses compared to the commonly used 902-928 MHz ISM band. Measurements were taken with a custom backscatter testbed and details of its design are provided. In the end, this dissertation presents both theory and measurements that demonstrate multipath fading reductions for backscatter-radio systems that use multiple antennas.Ph.D.Committee Chair: Durgin, Gregory; Committee Member: Ingram, Mary Ann; Committee Member: Nikitin, Pavel; Committee Member: Peterson, Andrew; Committee Member: Steffes, Pau

Backscatter Transponder Based on Frequency Selective Surface for FMCW Radar Applications

This paper describes an actively-controlled frequency selective surface (FSS) to implement a backscatter transponder. The FSS is composed by dipoles loaded with switching PIN diodes. The transponder exploits the change in the radar cross section (RCS) of the FSS with the bias of the diodes to modulate the backscattered response of the tag to the FMCW radar. The basic operation theory of the system is explained here. An experimental setup based on a commercial X-band FMCW radar working as a reader is proposed to measure the transponders. The transponder response can be distinguished from the interference of non-modulated clutter, modulating the transponder’s RCS. Some FSS with different number of dipoles are studied, as a proof of concept. Experimental results at several distances are provided

Sum Throughput Maximization in Multi-Tag Backscattering to Multiantenna Reader

Backscatter communication (BSC) is being realized as the core technology for pervasive sustainable Internet-of-Things applications. However, owing to the resource-limitations of passive tags, the efficient usage of multiple antennas at the reader is essential for both downlink excitation and uplink detection. This work targets at maximizing the achievable sum-backscattered-throughput by jointly optimizing the transceiver (TRX) design at the reader and backscattering coefficients (BC) at the tags. Since, this joint problem is nonconvex, we first present individually-optimal designs for the TRX and BC. We show that with precoder and {combiner} designs at the reader respectively targeting downlink energy beamforming and uplink Wiener filtering operations, the BC optimization at tags can be reduced to a binary power control problem. Next, the asymptotically-optimal joint-TRX-BC designs are proposed for both low and high signal-to-noise-ratio regimes. Based on these developments, an iterative low-complexity algorithm is proposed to yield an efficient jointly-suboptimal design. Thereafter, we discuss the practical utility of the proposed designs to other application settings like wireless powered communication networks and BSC with imperfect channel state information. Lastly, selected numerical results, validating the analysis and shedding novel insights, demonstrate that the proposed designs can yield significant enhancement in the sum-backscattered throughput over existing benchmarks.Comment: 17 pages, 5 figures, accepted for publication in IEEE Transactions on Communication