1,945 research outputs found
Scalability of broadcast performance in wireless network-on-chip
Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version
Experimental Evaluation and Comparison of Time-Multiplexed Multi-FPGA Routing Architectures
Emulating large complex designs require multi-FPGA systems (MFS). However, inter-FPGA communication is confronted by the challenge of lack of interconnect capacity due to limited number of FPGA input/output (I/O) pins. Serializing parallel signals onto a single trace effectively addresses the limited I/O pin obstacle. Besides the multiplexing scheme and multiplexing ratio (number of inter-FPGA signals per trace), the choice of the MFS routing architecture also affect the critical path latency. The routing architecture of an MFS is the interconnection pattern of FPGAs, fixed wires and/or programmable interconnect chips. Performance of existing MFS routing architectures is also limited by off-chip interface selection. In this dissertation we proposed novel 2D and 3D latency-optimized time-multiplexed MFS routing architectures. We used rigorous experimental approach and real sequential benchmark circuits to evaluate and compare the proposed and existing MFS routing architectures. This research provides a new insight into the encouraging effects of using off-chip optical interface and three dimensional MFS routing architectures. The vertical stacking results in shorter off-chip links improving the overall system frequency with the additional advantage of smaller footprint area. The proposed 3D architectures employed serialized interconnect between intra-plane and inter-plane FPGAs to address the pin limitation problem. Additionally, all off-chip links are replaced by optical fibers that exhibited latency improvement and resulted in faster MFS. Results indicated that exploiting third dimension provided latency and area improvements as compared to 2D MFS. We also proposed latency-optimized planar 2D MFS architectures in which electrical interconnections are replaced by optical interface in same spatial distribution. Performance evaluation and comparison showed that the proposed architectures have reduced critical path delay and system frequency improvement as compared to conventional MFS. We also experimentally evaluated and compared the system performance of three inter-FPGA communication schemes i.e. Logic Multiplexing, SERDES and MGT in conjunction with two routing architectures i.e. Completely Connected Graph (CCG) and TORUS. Experimental results showed that SERDES attained maximum frequency than the other two schemes. However, for very high multiplexing ratios, the performance of SERDES & MGT became comparable
An Interconnection Architecture for Seamless Inter and Intra-Chip Communication Using Wireless Links
As semiconductor technologies continues to scale, more and more cores are being integrated on the same multicore chip. This increase in complexity poses the challenge of efficient data transfer between these cores. Several on-chip network architectures are proposed to improve the design flexibility and communication efficiency of such multicore chips. However, in a larger system consisting of several multicore chips across a board or in a System-in-Package (SiP), the performance is limited by the communication among and within these chips. Such systems, most commonly found within computing modules in typical data center nodes or server racks, are in dire need of an efficient interconnection architecture.
Conventional interchip communication using wireline links involve routing the data from the internal cores to the peripheral I/O ports, travelling over the interchip channels to the destination chip, and finally getting routed from the I/O to the internal cores there. This multihop communication increases latency and energy consumption while decreasing data bandwidth in a multichip system. Furthermore, the intrachip and interchip communication architectures are separately designed to maximize design flexibility. Jointly designing them could, however, improve the communication efficiency significantly and yield better solutions.
Previous attempts at this include an all-photonic approach that provides a unified inter/intra-chip optical network, based on recent progress in nano-photonic technologies. Works on wireless inter-chip interconnects successfully yielded better results than their wired counterparts, but their scopes were limited to establishing a single wireless connection between two chips rather than a communication architecture for a system as a whole.
In this thesis, the design of a seamless hybrid wired and wireless interconnection network for multichip systems in a package is proposed. The design utilizes on-chip wireless transceivers with dimensions spanning up to tens of centimeters. It manages to seamlessly bind both intrachip and interchip communication architectures and enables direct chip-to-chip communication between the internal cores. It is shown through cycle accurate simulations that the proposed design increases the bandwidth and reduces the energy consumption when compared to the state-of-the-art wireline I/O based multichip communications
Development of Wireless Techniques in Data and Power Transmission - Application for Particle Physics Detectors
Wireless techniques have developed extremely fast over the last decade and
using them for data and power transmission in particle physics detectors is not
science- fiction any more. During the last years several research groups have
independently thought of making it a reality. Wireless techniques became a
mature field for research and new developments might have impact on future
particle physics experiments. The Instrumentation Frontier was set up as a part
of the SnowMass 2013 Community Summer Study [1] to examine the instrumentation
R&D for the particle physics research over the coming decades: {\guillemotleft}
To succeed we need to make technical and scientific innovation a priority in
the field {\guillemotright}. Wireless data transmission was identified as one
of the innovations that could revolutionize the transmission of data out of the
detector. Power delivery was another challenge mentioned in the same report. We
propose a collaboration to identify the specific needs of different projects
that might benefit from wireless techniques. The objective is to provide a
common platform for research and development in order to optimize effectiveness
and cost, with the aim of designing and testing wireless demonstrators for
large instrumentation systems
dReDBox: Materializing a full-stack rack-scale system prototype of a next-generation disaggregated datacenter
Current datacenters are based on server machines, whose mainboard and hardware components form the baseline, monolithic building block that the rest of the system software, middleware and application stack are built upon. This leads to the following limitations: (a) resource proportionality of a multi-tray system is bounded by the basic building block (mainboard), (b) resource allocation to processes or virtual machines (VMs) is bounded by the available resources within the boundary of the mainboard, leading to spare resource fragmentation and inefficiencies, and (c) upgrades must be applied to each and every server even when only a specific component needs to be upgraded. The dRedBox project (Disaggregated Recursive Datacentre-in-a-Box) addresses the above limitations, and proposes the next generation, low-power, across form-factor datacenters, departing from the paradigm of the mainboard-as-a-unit and enabling the creation of function-block-as-a-unit. Hardware-level disaggregation and software-defined wiring of resources is supported by a full-fledged Type-1 hypervisor that can execute commodity virtual machines, which communicate over a low-latency and high-throughput software-defined optical network. To evaluate its novel approach, dRedBox will demonstrate application execution in the domains of network functions virtualization, infrastructure analytics, and real-time video surveillance.This work has been supported in part by EU H2020 ICTproject dRedBox, contract #687632.Peer ReviewedPostprint (author's final draft
State of the art in chip-to-chip interconnects
This thesis presents a study of short-range links for chips mounted in the same package, on printed circuit boards or interposers. Implemented in CMOS technology between 7 and 250 nm, with links that operate at a data rate between 0,4 and 112 Gb/s/pin and with energy efficiencies from 0,3 to 67,7 pJ/bit. The links operate on channels with an attenuation lower than 50 dB. A comparison is made with graphical representations between the different articles that shows the correlation between the different essential metrics of chip-to-chip interconnects, as well as its evolution over the last 20 years.Esta tesis presenta un estudio de enlaces de corto alcance para chips montados en un mismo paquete, en placas de circuito impreso o intercaladores. Implementado en tecnología CMOS entre 7 y 250 nm, con enlaces que operan a una velocidad de datos entre 0,4 y 112 Gb/s/pin y con eficiencias energéticas de 0,3 a 67,7 pJ/bit. Los enlaces operan en canales con una atenuación inferior a 50 dB. Se realiza una comparación con representaciones gráficas entre los diferentes artículos que muestra la correlación entre las distintas métricas esenciales de las interconexiones chip a chip, así como su evolución en los últimos 20 años.Aquesta tesi presenta un estudi d'enllaços de curt abast per a xips muntats en el mateix paquet, en plaques de circuits impresos o interposers. Implementat en tecnologia CMOS entre 7 i 250 nm, amb enllaços que funcionen a una velocitat de dades entre 0,4 i 112 Gb/s/pin i amb eficiències energètiques de 0,3 a 67,7 pJ/bit. Els enllaços funcionen en canals amb una atenuació inferior a 50 dB. Es fa una comparació amb representacions gràfiques entre els diferents articles que mostra la correlació entre les diferents mètriques essencials d'interconnexions xip a xip, així com la seva evolució en els darrers 20 anys
Data communication network at the ASRM facility
The main objective of the report is to present the overall communication network structure for the Advanced Solid Rocket Motor (ASRM) facility being built at Yellow Creek near Iuka, Mississippi. This report is compiled using information received from NASA/MSFC, LMSC, AAD, and RUST Inc. As per the information gathered, the overall network structure will have one logical FDDI ring acting as a backbone for the whole complex. The buildings will be grouped into two categories viz. manufacturing critical and manufacturing non-critical. The manufacturing critical buildings will be connected via FDDI to the Operational Information System (OIS) in the main computing center in B 1000. The manufacturing non-critical buildings will be connected by 10BASE-FL to the Business Information System (BIS) in the main computing center. The workcells will be connected to the Area Supervisory Computers (ASCs) through the nearest manufacturing critical hub and one of the OIS hubs. The network structure described in this report will be the basis for simulations to be carried out next year. The Comdisco's Block Oriented Network Simulator (BONeS) will be used for the network simulation. The main aim of the simulations will be to evaluate the loading of the OIS, the BIS, the ASCs, and the network links by the traffic generated by the workstations and workcells throughout the site
Recommended from our members
Optically-Connected Memory: Architectures and Experimental Characterizations
Growing demands on future data centers and high-performance computing systems are driving the development of processor-memory interconnects with greater performance and flexibility than can be provided by existing electronic interconnects. A redesign of the systems' memory devices and architectures will be essential to enabling high-bandwidth, low-latency, resilient, energy-efficient memory systems that can meet the challenges of exascale systems and beyond. By leveraging an optics-based approach, this thesis presents the design and implementation of an optically-connected memory system that exploits both the bandwidth density and distance-independent energy dissipation of photonic transceivers, in combination with the flexibility and scalability offered by optical networks. By replacing the electronic memory bus with an optical interconnection network, novel memory architectures can be created that are otherwise infeasible. With remote optically-connected memory nodes accessible to processors as if they are local, programming models can be designed to utilize and efficiently share greater amounts of data. Processors that would otherwise be idle, being starved for data while waiting for scarce memory resources, can instead operate at high utilizations, leading to drastic improvements in the overall system performance. This work presents a prototype optically-connected memory module and a custom processor-based optical-network-aware memory controller that communicate transparently and all-optically across an optical interconnection network. The memory modules and controller are optimized to facilitate memory accesses across the optical network using a packet-switched, circuit-switched, or hybrid packet-and-circuit-switched approach. The novel memory controller is experimentally demonstrated to be compatible with existing processor-memory access protocols, with the memory controller acting as the optics-computing interface to render the optical network transparent. Additionally, the flexibility of the optical network enables additional performance benefits including increased memory bandwidth through optical multicasting. This optically-connected architecture can further enable more resilient memory system realizations by expanding on current error dectection and correction memory protocols. The integration of optics with memory technology constitutes a critical step for both optics and computing. The scalability challenges facing main memory systems today, especially concerning bandwidth and power consumption, complement well with the strengths of optical communications-based systems. Additionally, ongoing efforts focused on developing low-cost optical components and subsystems that are suitable for computing environments may benefit from the high-volume memory market. This work therefore takes the first step in merging the areas of optics and memory, developing the necessary architectures and protocols to interface the two technologies, and demonstrating potential benefits while identifying areas for future work. Future computing systems will undoubtedly benefit from this work through the deployment of high-performance, flexible, energy-efficient optically-connected memory architectures
- …