54 research outputs found

    Relay Selection for Two-way Relaying with Amplify-and-Forward Protocols

    Full text link
    In this paper, we propose a relay selection amplify-and-forward (RS-AF) protocol in general bi-directional relay networks with two sources and NN relays. In the proposed scheme, the two sources first transmit to all the relays simultaneously, and then a single relay with a minimum sum symbol error rate (SER) will be selected to broadcast the received signals back to both sources. To facilitate the selection process, we propose a simple sub-optimal Min-Max criterion for relay selection, where a single relay which minimizes the maximum SER of two source nodes will be selected. Simulation results show that the proposed Min-Max selection has almost the same performance as the optimal selection with lower complexity. We also present a simple asymptotic SER expression and make comparison with the conventional all-participate amplify-and-forward (AP-AF) relaying scheme. The analytical results are verified through simulations. To improve the system performance, optimum power allocation (OPA) between the sources and the relay is determined based on the asymptotic SER. Simulation results indicate that the proposed RS-AF scheme with OPA yields considerable performance improvement over an equal power allocation (EPA) scheme, specially with large number of relay nodes.Comment: 19 pages, 6 figure

    A general analytical approach for opportunistic cooperative systems with spatially random relays

    Get PDF
    This paper investigates an opportunistic cooperative system with multiple relays. The locations of the relays are essentially random due to their unpredictable mobility and are thus assumed to form a spatial Poisson process. A general analytical approach to performance analysis is developed to accommodate the randomness of the locations as well as the underlying channels. The outage probability of the system is derived based on the theory of point processes. In particular, two relay selection criteria, namely the best forward channel selection and the best worse channel selection, are used as examples to illustrate the proposed approach. The accuracy of the analytical results is verified by Monte-Carlo simulations with various system configurations. © 2011 IEEE.published_or_final_versio

    Distributed transmission schemes for wireless communication networks

    Get PDF
    In this thesis new techniques are presented to achieve performance enhancement in wireless cooperative networks. In particular, techniques to improve transmission rate and maximise end-to-end signal-to-noise ratio are described. An offset transmission scheme with full interference cancellation for a wireless cooperative network with frequency flat links and four relays is introduced. This method can asymptotically, as the size of the symbol block increases, achieve maximum transmission rate together with full cooperative diversity provided the destination node has multiple antennas. A novel full inter-relay interference cancellation method that also achieves asymptotically maximum rate and full cooperative diversity is then designed for which the destination node only requires a single antenna. Two- and four-relay selection schemes for wireless cooperative amplify and forward type networks are then studied in order to overcome the degradation of end-to-end bit error rate performance in single-relay selection networks when there are feedback errors in the relay to destination node links. Outage probability analysis for a four-relay selection scheme without interference is undertaken. Outage probability analysis of a full rate distributed transmission scheme with inter-relay interference is also studied for best single- and two-relay selection networks. The advantage of multi-relay selection when no interference occurs and when adjacent cell interference is present at the relay nodes is then shown theoretically. Simulation results for outage probability analysis are included which support the theoretical expressions. Finally, outage probability analysis of a cognitive amplify and forward type relay network with cooperation between certain secondary users, chosen by best single-, two- and four-relay selection is presented. The cognitive amplify and forward relays are assumed to exploit an underlay approach, which requires adherence to an interference constraint on the primary user. The relay selection scheme is performed either with a max−min strategy or one based on maximising exact end-to-end signal-to-noise ratio. The outage probability analyses are again confirmed by numerical evaluations

    Adaptive relay techniques for OFDM-based cooperative communication systems

    Get PDF
    Cooperative communication has been considered as a cost-effective manner to exploit the spatial diversity, improve the quality-of-service and extend transmission coverage. However, there are many challenges faced by cooperative systems which use relays to forward signals to the destination, such as the accumulation of multipath channels, complex resource allocation with the bidirectional asymmetric traffic and reduction of transmission efficiency caused by additional relay overhead. In this thesis, we aim to address the above challenges of cooperative communications, and design the efficient relay systems. Starting with the channel accumulation problem in the amplify-and-forward relay system, we proposed two adaptive schemes for single/multiple-relay networks respectively. These schemes exploit an adaptive guard interval (GI) technique to cover the accumulated delay spread and enhance the transmission efficiency by limiting the overhead. The proposed GI scheme can be implemented without any extra control signal. Extending the adaptive GI scheme to multiple-relay systems, we propose a relay selection strategy which achieves the trade-off between the transmission reliability and overhead by considering both the channel gain and the accumulated delay spread. We then consider resource allocation problem in the two-way decode-and-forward relay system with asymmetric traffic loads. Two allocation algorithms are respectively investigated for time-division and frequency-division relay systems to maximize the end-to-end capacity of the two-way system under a capacity ratio constraint. For the frequency-division systems, a balanced end-to-end capacity is defined as the objective function which combines the requirements of maximizing the end-to-end capacity and achieving the capacity ratio. A suboptimal algorithm is proposed for the frequency-division systems which separates subcarrier allocation and time/power allocation. It can achieve the similar performance with the optimal one with reduced complexity. In order to further enhance the transmission reliability and maintaining low processing delay, we propose an equalize-and-forward (EF) relay scheme. The EF relay equalizes the channel between source and relay to eliminate the channel accumulation without signal regeneration. To reduce the processing time, an efficient parallel structure is applied in the EF relay. Numerical results show that the EF relay exhibits low outage probability at the same data rate as compared to AF and DF schemes
    • …
    corecore