Seven strategies for tolerating highly defective fabrication

In this article we present an architecture that supports fine-grained sparing and resource matching. The base logic structure is a set of interconnected PLAs. The PLAs and their interconnections consist of large arrays of interchangeable nanowires, which serve as programmable product and sum terms and as programmable interconnect links. Each nanowire can have several defective programmable junctions. We can test nanowires for functionality and use only the subset that provides appropriate conductivity and electrical characteristics. We then perform a matching between nanowire junction programmability and application logic needs to use almost all the nanowires even though most of them have defective junctions. We employ seven high-level strategies to achieve this level of defect tolerance

Design of an Efficient Interconnection Network of Temperature Sensors

Temperature has become a first class design constraint because high temperatures adversely affect circuit reliability, static power and degrade the performance. In this scenario, thermal characterization of ICs and on-chip temperature monitoring represent fundamental tasks in electronic design. In this work, we analyze the features that an interconnection network of temperature sensors must fulfill. Departing from the network topology, we continue with the proposal of a very light-weight network architecture based on digitalization resource sharing. Our proposal supposes a 16% improvement in area and power consumption compared to traditional approache

dRail: a novel physical layout methodology for power gated circuits

In this paper we present a physical layout methodology, called dRail, to allow power gated and non-power gated cells to be placed next to each other. This is unlike traditional voltage area layout which separates cells to prevent shorting of power supplies leading to impact on area, routing and power. To implement dRail, a modified standard cell architecture and physical layout is proposed. The methodology is validated by implementing power gating on the data engine in an ARM Cortex-A5 processor using a 65nm library, and shows up to 38% reduction in area cost when compared to traditional voltage area layou

A global wire planning scheme for Network-on-Chip.

As technology scales down, the interconnect for on-chip global communication becomes the delay bottleneck. In order to provide well-controlled global wire delay and efficient global communication, a packet switched Network-on-Chip (NoC) architecture was proposed by different authors. In this paper, the NoC system parameters constrained by the interconnections are studied. Predictions on scaled system parameters such as clock frequency, resource size, global communication bandwidth and inter-resource delay are made for future technologies. Based on these parameters, a global wire planning scheme is proposed

An Energy and Performance Exploration of Network-on-Chip Architectures

In this paper, we explore the designs of a circuit-switched router, a wormhole router, a quality-of-service (QoS) supporting virtual channel router and a speculative virtual channel router and accurately evaluate the energy-performance tradeoffs they offer. Power results from the designs placed and routed in a 90-nm CMOS process show that all the architectures dissipate significant idle state power. The additional energy required to route a packet through the router is then shown to be dominated by the data path. This leads to the key result that, if this trend continues, the use of more elaborate control can be justified and will not be immediately limited by the energy budget. A performance analysis also shows that dynamic resource allocation leads to the lowest network latencies, while static allocation may be used to meet QoS goals. Combining the power and performance figures then allows an energy-latency product to be calculated to judge the efficiency of each of the networks. The speculative virtual channel router was shown to have a very similar efficiency to the wormhole router, while providing a better performance, supporting its use for general purpose designs. Finally, area metrics are also presented to allow a comparison of implementation costs