High reliability of real-time visual data transmission using superposition coding with receiver diversity

Supporting visual data applications in the real-time communication systems are among the most challenging issues over the next generation wireless communication systems. This challenge is further magnified by the fact that the quality of reception is highly sensitive to transmission delay, data losses and bit error rate (BER) in such applications. In this paper, we proposed Superposition Coding with Receiver Diversity (SPC-RD) scheme, which employs unequal error protection (UEP) to improve the error performance, maximize the received signal to noise ratio (SNR) and optimize the reliability of the transmission system. In the transmitter side, the visual data is divided into a number of different priority layers based on their effects on the reception quality. These layers are modulated individually where the highest priority layer is modulated with the highest UEP level against error-prone channels, and vice versa. These modulated signals are then superimposed together and transmitted via wireless Single-Input Multiple-Output (SIMO) Rayleigh fading channel. In the receiver side, three different diversity combining approaches; selection combining (SC), equal gain combining (EGC) and maximal ratio combining (MRC) are considered. The combined signal is then passed through a multiuser demodulator so-called the ordered successive interference cancellation (O-SIC) demodulator to reconstruct and separate the data layers. This demodulation technique is evaluated and compared with the traditionally maximum likelihood joint detection (MLJD) technique. Extensive simulations have been carried out to validate the various assertions. Under the assumption of equal transmission power, the simulation results illustrate that the proposed SPC-RD scheme provides a SNR gain of 14.5 dB over the Rayleigh fading channel at the diversity order of three for the acceptable BER level of 10−3 when BPSK scheme is exploited compared to the traditional equal error protection system. In addition, the proposed scheme with O-SIC demodulation technique achieves almost similar performance compared to MLJD technique but using less computational complexity

Two-Layered Superposition of Broadcast/Multicast and Unicast Signals in Multiuser OFDMA Systems

We study optimal delivery strategies of one common and $K$ independent messages from a source to multiple users in wireless environments. In particular, two-layered superposition of broadcast/multicast and unicast signals is considered in a downlink multiuser OFDMA system. In the literature and industry, the two-layer superposition is often considered as a pragmatic approach to make a compromise between the simple but suboptimal orthogonal multiplexing (OM) and the optimal but complex fully-layered non-orthogonal multiplexing. In this work, we show that only two-layers are necessary to achieve the maximum sum-rate when the common message has higher priority than the $K$ individual unicast messages, and OM cannot be sum-rate optimal in general. We develop an algorithm that finds the optimal power allocation over the two-layers and across the OFDMA radio resources in static channels and a class of fading channels. Two main use-cases are considered: i) Multicast and unicast multiplexing when $K$ users with uplink capabilities request both common and independent messages, and ii) broadcast and unicast multiplexing when the common message targets receive-only devices and $K$ users with uplink capabilities additionally request independent messages. Finally, we develop a transceiver design for broadcast/multicast and unicast superposition transmission based on LTE-A-Pro physical layer and show with numerical evaluations in mobile environments with multipath propagation that the capacity improvements can be translated into significant practical performance gains compared to the orthogonal schemes in the 3GPP specifications. We also analyze the impact of real channel estimation and show that significant gains in terms of spectral efficiency or coverage area are still available even with estimation errors and imperfect interference cancellation for the two-layered superposition system

Cellular, Wide-Area, and Non-Terrestrial IoT: A Survey on 5G Advances and the Road Towards 6G

The next wave of wireless technologies is proliferating in connecting things among themselves as well as to humans. In the era of the Internet of things (IoT), billions of sensors, machines, vehicles, drones, and robots will be connected, making the world around us smarter. The IoT will encompass devices that must wirelessly communicate a diverse set of data gathered from the environment for myriad new applications. The ultimate goal is to extract insights from this data and develop solutions that improve quality of life and generate new revenue. Providing large-scale, long-lasting, reliable, and near real-time connectivity is the major challenge in enabling a smart connected world. This paper provides a comprehensive survey on existing and emerging communication solutions for serving IoT applications in the context of cellular, wide-area, as well as non-terrestrial networks. Specifically, wireless technology enhancements for providing IoT access in fifth-generation (5G) and beyond cellular networks, and communication networks over the unlicensed spectrum are presented. Aligned with the main key performance indicators of 5G and beyond 5G networks, we investigate solutions and standards that enable energy efficiency, reliability, low latency, and scalability (connection density) of current and future IoT networks. The solutions include grant-free access and channel coding for short-packet communications, non-orthogonal multiple access, and on-device intelligence. Further, a vision of new paradigm shifts in communication networks in the 2030s is provided, and the integration of the associated new technologies like artificial intelligence, non-terrestrial networks, and new spectra is elaborated. Finally, future research directions toward beyond 5G IoT networks are pointed out.Comment: Submitted for review to IEEE CS&

Efficient Transmission Techniques in Cooperative Networks: Forwarding Strategies and Distributed Coding Schemes

This dissertation focuses on transmission and estimation schemes in wireless relay network, which involves a set of source nodes, a set of destination nodes, and a set of nodes helps communication between source nodes and destination nodes, called relay nodes. It is noted that the overall performance of the wireless relay systems would be impacted by the relay methods adopted by relay nodes. In this dissertation, efficient forwarding strategies and channel coding involved relaying schemes in various relay network topology are studied.First we study a simple structure of relay systems, with one source, one destination and one relay node. By exploiting “analog codes” -- a special class of error correction codes that can directly encode and protect real-valued data, a soft forwarding strategy –“analog-encode-forward (AEF)”scheme is proposed. The relay node first soft-decodes the packet from the source, then re-encodes this soft decoder output (Log Likelihood Ratio) using an appropriate analog code, and forwards it to the destination. At the receiver, both a maximum-likelihood (ML) decoder and a maximum a posterior (MAP) decoder are specially designed for the AEF scheme.The work is then extended to parallel relay networks, which is consisted of one source, one destination and multiple relay nodes. The first question confronted with us is which kind of soft information to be relayed at the relay nodes. We analyze a set of prevailing soft information for relaying considered by researchers in this field. A truncated LLR is proved to be the best choice, we thus derive another soft forwarding strategy – “Z” forwarding strategy. The main parameter effecting the overall performance in this scheme is the threshold selected to cut the LLR information. We analyze the threshold selection at the relay nodes, and derive the exact ML estimation at the destination node. To circumvent the catastrophic error propagation in digital distributed coding scheme, a distributed soft coding scheme is proposed for the parallel relay networks. The key idea is the exploitation of a rate-1 soft convolutional encoder at each of the parallel relays, to collaboratively form a simple but powerful distributed analog coding scheme. Because of the linearity of the truncated LLR information, a nearly optimal ML decoder is derived for the distributed coding scheme. In the last part, a cooperative transmission scheme for a multi-source single-destination system through superposition modulation is investigated. The source nodes take turns to transmit, and each time, a source “overlays” its new data together with (some or all of) what it overhears from its partner(s), in a way similar to French-braiding the hair. We introduce two subclasses of braid coding, the nonregenerative and the regenerative cases, and, using the pairwise error probability (PEP) as a figure of merit, derive the optimal weight parameters for each one. By exploiting the structure relevance of braid codes with trellis codes, we propose a Viterbi maximum-likelihood (ML) decoding method of linear-complexity for the regenerative case. We also present a soft-iterative joint channel-network decoding. The overall decoding process is divided into the forward message passing and the backward message passing, which makes effective use of the available reliability information from all the received signals. We show that the proposed “braid coding” cooperative scheme benefits not only from the cooperative diversity but also from the bit error rate (BER) performance gain

Multiuser MIMO-OFDM for Next-Generation Wireless Systems

This overview portrays the 40-year evolution of orthogonal frequency division multiplexing (OFDM) research. The amelioration of powerful multicarrier OFDM arrangements with multiple-input multiple-output (MIMO) systems has numerous benefits, which are detailed in this treatise. We continue by highlighting the limitations of conventional detection and channel estimation techniques designed for multiuser MIMO OFDM systems in the so-called rank-deficient scenarios, where the number of users supported or the number of transmit antennas employed exceeds the number of receiver antennas. This is often encountered in practice, unless we limit the number of users granted access in the base station’s or radio port’s coverage area. Following a historical perspective on the associated design problems and their state-of-the-art solutions, the second half of this treatise details a range of classic multiuser detectors (MUDs) designed for MIMO-OFDM systems and characterizes their achievable performance. A further section aims for identifying novel cutting-edge genetic algorithm (GA)-aided detector solutions, which have found numerous applications in wireless communications in recent years. In an effort to stimulate the cross pollination of ideas across the machine learning, optimization, signal processing, and wireless communications research communities, we will review the broadly applicable principles of various GA-assisted optimization techniques, which were recently proposed also for employment inmultiuser MIMO OFDM. In order to stimulate new research, we demonstrate that the family of GA-aided MUDs is capable of achieving a near-optimum performance at the cost of a significantly lower computational complexity than that imposed by their optimum maximum-likelihood (ML) MUD aided counterparts. The paper is concluded by outlining a range of future research options that may find their way into next-generation wireless systems