A High Step Up Converter With A Voltage Multiplier Module For A Pv System

A novel high step-up high-efficiency interleaved converter with voltage multiplier module for renewable energy system, is proposed in this paper. A new voltage multiplier module composed which is having switched capacitors and coupled inductors, with its combination a conventional interleaved boost converter obtains high step-up gain without operating at extreme duty ratio is designed. This proposed converter reduces the current stress and also reduces constrains the input current ripple, which decreases the conduction losses and lengthens the lifetime of the input source. Hence, large voltage spikes across the main switches are reduced, and hence the efficiency will be improved. Even the low voltage stress makes the low-voltage-rated MOSFETs be adopted for reductions of conduction losses and cost. The proposed circuit designed with 40-V input voltage, 380-V output, and 1000-W output power in the MATLAB/SIMULINK software, and is operated to verify its performance. The highest efficiency is 97.1%

Boost Interleaved Converter Integrated Voltage Multiplier Module for Renewable Energy System

This document presents a high step-up converter, which is apt for renewable energy system. Through a voltage multiplier unit composed of switched capacitors and coupled inductors, a conventional interleaved boost converter obtains high step-up gain without operating at extreme duty ratio. The design of the proposed converter not only reduces the current stress but also constrains the input current ripple, which decreases the conduction losses and lengthens the lifetime of the input source. In addition, due to the lossless passive clamp performance, leakage energy is recycled to the output terminal. Hence, large voltage spikes across the main switches are alleviated, and the efficiency is improved. Even the low voltage stress makes the low-voltage-rated MOSFETs be adopted for reductions of conduction losses and cost. Finally, the prototype circuit with 40-V input voltage, 380-V output, and 1000-W output power is operated to verify its performance. The highest efficiency is 97.1%. Index Terms - Voltage multiplier module. Boost–flyback converter, high step-up, photovoltaic (PV) system

Closed Loop Control of High Voltage Gain IBC with Voltage Multiplier Module

This paper presents the closed loop control of a high voltage gain IBC. A high voltage gain Interleaved Boost Converter (IBC) with Voltage Multiplier module is suitable for renewable energy system, which requires high step up conversion ratio. In order to obtain high gain, a built-in transformer and a voltage multiplier module inserted into each phase of conventional interleaved boost converter. The voltage multiplier cell is composed of built-in transformer windings, diodes and small capacitors. The Voltage multiplier module is efficient, low cost and simple topology composed of switched capacitors and diodes to obtain high DC output voltage. In order to obtain the controlled output voltage from a DC – DC converter under varying input conditions, it is necessary to regulate the output voltage which is achieved through closed loop control. A PI controller is implemented to improve its performance of the proposed IBC during the disturbances due to renewable energy sources. The closed loop control of the proposed IBC with multiplier module is analyzed and simulated for high voltage gain using MATLAB Simulink

Survey on Photo-Voltaic Powered Interleaved Converter System

Renewable energy is the best solution to meet the growing demand for energy in the country. The solar energy is considered as the most promising energy by the researchers due to its abundant availability, eco-friendly nature, long lasting nature, wide range of application and above all it is a maintenance free system. The energy absorbed by the earth can satisfy 15000 times of today’s total energy demand and its hundred times more than that our conventional energy like coal and other fossil fuels. Though, there are overwhelming advantages in solar energy, It has few drawbacks as well such as its low conversion ratio, inconsistent supply of energy due to variation in the sun light, less efficiency due to ripples in the converter, time dependent and, above all, high capitation cost. These aforementioned flaws have been addressed by the researchers in order to extract maximum energy and attain hundred percentage benefits of this heavenly resource. So, this chapter presents a comprehensive investigation based on photo voltaic (PV) system requirements with the following constraints such as system efficiency, system gain, dynamic response, switching losses are investigated. The overview exhibits and identifies the requirements of a best PV power generation system

Advanced topologies of high step-up DC-DC converters for renewable energy applications

This research is focused on developing several advanced topologies of high step-up DC-DC converters to connect low-voltage renewable energy (RE) sources, such as photovoltaic (PV) panels and fuel cells (FCs), into a high-voltage DC bus in renewable energy applications. The proposed converters are based on the combinations of various voltage-boosting (VB) techniques, including interleaved and quadratic structures, switched-capacitor (SC)-based voltage multiplier (VM) cells, and magnetically coupled inductor (CI) and built-in-transformer (BIT). The proposed converters offer outstanding features, including high voltage gain with low or medium duty cycle, a small number of components, low current and voltage stresses on the components, continuous input current with low ripple, and high efficiency. This research includes five new advanced high step-up DC-DC converters with detailed analyses. First, an interleaved converter is presented, which is based on the integration of two three-winding CIs with SC-based VM cells. Second, a dual-switch converter is proposed, which is based on the integration of a single three-winding CI with SC-based VM cells. Third, the SC-based VM cells are utilized to present three new Z-source (ZS)-based converters. Fourth, two double-winding CIs and a three-winding BIT are combined with SC-based VM cells to develop another interleaved high step-up converter. Finally, two double-winding CIs and SC-based VM cells are adopted to devise an interleaved quadratic converter with high voltage gain. The operating and steady-state analyses, design considerations, and a comparison with similar converters in the literature are provided for each converter. In addition, hardware prototypes were fabricated to verify the performance of the proposed converters --Abstract, page iv

High gain - high power (HGHP) DC-DC converter for DC microgrid applications: design and testing

The use of green energy sources to feed DC microgrids is gaining prominence over traditional centralised AC systems. DC microgrids are characterised by the use of intermediate DC-DC converter which acts as power conditioning units. Hence, the choice of an appropriate DC-DC converter becomes significant as the overall system efficiency is strongly dependent on the converter’s performance. This paper proposes a novel high gain high power (HGHP) DC-DC converter for DC microgrid, which is of one of the significant step forward in the development of DC microgrids. The suitability of the proposed HGHP DC-DC converter is demonstrated by experimental tests of the 60V/1.1kV, 3kW converter; test results validate the converter’s suitability for DC distribution. A significant number of performance parameters of the proposed converter is compared with state of the art converter topologies demonstrating the superior capabilities of the proposed converter. This paper also portrays the potential benefits that could be reaped by trending towards DC instead of existing AC system. The advantages and challenges to be confronted in the foreseeable future while implementing sustainable DC microgrids are also highlighted. Finally, this paper encapsulates renewable energy fed DC microgrid system as an appropriate, technically feasible, economically viable and competent solution for efficiently utilising the sustainable energy sources

Design and Evaluation of High Efficiency Power Converters Using Wide-Bandgap Devices for PV Systems

The shortage of fossil resources and the need for power generation options that produce little or no environmental pollution drives and motivates the research on renewable energy resources. Power electronics play an important role in maximizing the utilization of energy generation from renewable energy resources. One major renewable energy source is photovoltaics (PV), which comprises half of all recently installed renewable power generation in the world. For a grid-connected system, two power stages are needed to utilize the power generated from the PV source. In the first stage, a DCDC converter is used to extract the maximum power from the PV panel and to boost the low output voltage generated to satisfy the inverter side requirements. In the second stage, a DC-AC inverter is used to convert and deliver power loads for grid-tied applications. In general, PV panels have low efficiency so high-performance power converters are required to ensure highly efficient PV systems. The development of wide-bandgap (WBG) power switching devices, especially in the range of 650 V and 1200 V blocking class voltage, opens up the possibility of achieving a reliable and highly efficient grid-tied PV system. This work will study the benefits of utilizing WBG semiconductor switching devices in low power residential scale PV systems in terms of efficiency, power density, and thermal analysis. The first part of this dissertation will examine the design of a high gain DC-DC converter. Also, a performance comparison will be conducted between the SiC and Si MOSFET switching devices at 650 V blocking voltage regarding switching waveform behavior, switching and conduction losses, and high switching frequency operation. A major challenge in designing a transformerless inverter is the circulating of common mode leakage current in the absence of galvanic isolation. The value of the leakage current must be less than 300mA, per the DIN VDE 0126-1-1 standard. The second part of this work investigates a proposed high-efficiency transformerless inverter with low leakage current. Subsequently, the benefits of using SiC MOSFET are evaluated and compared to Si IGBT at 1200 V blocking voltage in terms of efficiency improvement, filter size reduction, and increasing power rating. Moreover, a comprehensive thermal model design is presented using COMSOL software to compare the heat sink requirements of both of the selected switching devices, SiC MOSFET and Si IGBT. The benchmarking of switching devices shows that SiC MOSFET has superior switching and conduction characteristics that lead to small power losses. Also, increasing switching frequency has a small effect on switching losses with SiC MOSFET due to its excellent switching characteristics. Therefore, system performance is found to be enhanced with SiC MOSFET compared to that of Si MOSFET and Si IGBET under wide output loads and switching frequency situations. Due to the high penetration of PV inverters, it is necessary to provide advanced functions, such as reactive power generation to enable connectivity to the utility grid. Therefore, this research proposes a modified modulation method to support the generation of reactive power. Additionally, a modified topology is proposed to eliminate leakage current

An original transformer and switched-capacitor (T & SC)-based extension for DC-DC boost converter for high-voltage/low-current renewable energy applications:Hardware implementation of a new T & SC boost converter

In this article a new Transformer and Switched Capacitor-based Boost Converter (T & SC-BC) is proposed for high-voltage/low-current renewable energy applications. The proposed T & SC-BC is an original extension for DC-DC boost converter which is designed by utilizing a transformer and switched capacitor (T & SC). Photovoltaic (PV) energy is a fast emergent segment among the renewable energy systems. The proposed T & SC-BC combines the features of the conventional boost converter and T & SC to achieve a high voltage conversion ratio. A Maximum Power Point Tracking (MPPT) controller is compulsory and necessary in a PV system to extract maximum power. Thus, a photovoltaic MPPT control mechanism also articulated for the proposed T & SC-BC. The voltage conversion ratio (Vo/Vin) of proposed converter is (1 + k)/(1 − D) where, k is the turns ratio of the transformer and D is the duty cycle (thus, the converter provides 9.26, 13.88, 50/3 voltage conversion ratios at 78.4 duty cycle with k = 1, 2, 2.6, respectively). The conspicuous features of proposed T & SC-BC are: (i) a high voltage conversion ratio (Vo/Vin); (ii) continuous input current (Iin); (iii) single switch topology; (iv) single input source; (v) low drain to source voltage (VDS) rating of control switch; (vi) a single inductor and a single untapped transformer are used. Moreover, the proposed T & SC-BC topology was compared with recently addressed DC-DC converters in terms of number of components, cost, voltage conversion ratio, ripples, efficiency and power range. Simulation and experimental results are provided which validate the functionality, design and concept of the proposed approach

Two new families of high-gain DC-DC power electronic converters for DC-microgrids

Distributing the electric power in dc form is an appealing solution in many applications such as telecommunications, data centers, commercial buildings, and microgrids. A high gain dc-dc power electronic converter can be used to individually link low-voltage elements such as solar panels, fuel cells, and batteries to the dc voltage bus which is usually 400 volts. This way, it is not required to put such elements in a series string to build up their voltages. Consequently, each element can function at it optimal operating point regardless of the other elements in the system. In this dissertation, first a comparative study of dc microgrid architectures and their advantages over their ac counterparts is presented. Voltage level selection of dc distribution systems is discussed from the cost, reliability, efficiency, and safety standpoints. Next, a new family of non-isolated high-voltage-gain dc-dc power electronic converters with unidirectional power flow is introduced. This family of converters benefits from a low voltage stress across its switches. The proposed topologies are versatile as they can be utilized as single-input or double-input power converters. In either case, they draw continuous currents from their sources. Lastly, a bidirectional high-voltage-gain dc-dc power electronic converter is proposed. This converter is comprised of a bidirectional boost converter which feeds a switched-capacitor architecture. The switched-capacitor stage suggested here has several advantages over the existing approaches. For example, it benefits from a higher voltage gain while it uses less number of capacitors. The proposed converters are highly efficient and modular. The operating modes, dc voltage gain, and design procedure for each converter are discussed in details. Hardware prototypes have been developed in the lab. The results obtained from the hardware agree with those of the simulation models. --Abstract, page iv