25,025 research outputs found
Waveform Design for 5G and Beyond
5G is envisioned to improve major key performance indicators (KPIs), such as
peak data rate, spectral efficiency, power consumption, complexity, connection
density, latency, and mobility. This chapter aims to provide a complete picture
of the ongoing 5G waveform discussions and overviews the major candidates. It
provides a brief description of the waveform and reveals the 5G use cases and
waveform design requirements. The chapter presents the main features of cyclic
prefix-orthogonal frequency-division multiplexing (CP-OFDM) that is deployed in
4G LTE systems. CP-OFDM is the baseline of the 5G waveform discussions since
the performance of a new waveform is usually compared with it. The chapter
examines the essential characteristics of the major waveform candidates along
with the related advantages and disadvantages. It summarizes and compares the
key features of different waveforms.Comment: 22 pages, 21 figures, 2 tables; accepted version (The URL for the
final version:
https://onlinelibrary.wiley.com/doi/abs/10.1002/9781119333142.ch2
Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks
Soaring capacity and coverage demands dictate that future cellular networks
need to soon migrate towards ultra-dense networks. However, network
densification comes with a host of challenges that include compromised energy
efficiency, complex interference management, cumbersome mobility management,
burdensome signaling overheads and higher backhaul costs. Interestingly, most
of the problems, that beleaguer network densification, stem from legacy
networks' one common feature i.e., tight coupling between the control and data
planes regardless of their degree of heterogeneity and cell density.
Consequently, in wake of 5G, control and data planes separation architecture
(SARC) has recently been conceived as a promising paradigm that has potential
to address most of aforementioned challenges. In this article, we review
various proposals that have been presented in literature so far to enable SARC.
More specifically, we analyze how and to what degree various SARC proposals
address the four main challenges in network densification namely: energy
efficiency, system level capacity maximization, interference management and
mobility management. We then focus on two salient features of future cellular
networks that have not yet been adapted in legacy networks at wide scale and
thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and
device-to-device (D2D) communications. After providing necessary background on
CoMP and D2D, we analyze how SARC can particularly act as a major enabler for
CoMP and D2D in context of 5G. This article thus serves as both a tutorial as
well as an up to date survey on SARC, CoMP and D2D. Most importantly, the
article provides an extensive outlook of challenges and opportunities that lie
at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201
Frame Structure Design and Analysis for Millimeter Wave Cellular Systems
The millimeter-wave (mmWave) frequencies have attracted considerable
attention for fifth generation (5G) cellular communication as they offer orders
of magnitude greater bandwidth than current cellular systems. However, the
medium access control (MAC) layer may need to be significantly redesigned to
support the highly directional transmissions, ultra-low latencies and high peak
rates expected in mmWave communication. To address these challenges, we present
a novel mmWave MAC layer frame structure with a number of enhancements
including flexible, highly granular transmission times, dynamic control signal
locations, extended messaging and ability to efficiently multiplex directional
control signals. Analytic formulae are derived for the utilization and control
overhead as a function of control periodicity, number of users, traffic
statistics, signal-to-noise ratio and antenna gains. Importantly, the analysis
can incorporate various front-end MIMO capability assumptions -- a critical
feature of mmWave. Under realistic system and traffic assumptions, the analysis
reveals that the proposed flexible frame structure design offers significant
benefits over designs with fixed frame structures similar to current 4G
long-term evolution (LTE). It is also shown that fully digital beamforming
architectures offer significantly lower overhead compared to analog and hybrid
beamforming under equivalent power budgets.Comment: Submitted to IEEE Transactions for Wireless Communication
Efficient Fast-Convolution-Based Waveform Processing for 5G Physical Layer
This paper investigates the application of fast-convolution (FC) filtering
schemes for flexible and effective waveform generation and processing in the
fifth generation (5G) systems. FC-based filtering is presented as a generic
multimode waveform processing engine while, following the progress of 5G new
radio standardization in the Third-Generation Partnership Project, the main
focus is on efficient generation and processing of subband-filtered cyclic
prefix orthogonal frequency-division multiplexing (CP-OFDM) signals. First, a
matrix model for analyzing FC filter processing responses is presented and used
for designing optimized multiplexing of filtered groups of CP-OFDM physical
resource blocks (PRBs) in a spectrally well-localized manner, i.e., with narrow
guardbands. Subband filtering is able to suppress interference leakage between
adjacent subbands, thus supporting independent waveform parametrization and
different numerologies for different groups of PRBs, as well as asynchronous
multiuser operation in uplink. These are central ingredients in the 5G waveform
developments, particularly at sub-6-GHz bands. The FC filter optimization
criterion is passband error vector magnitude minimization subject to a given
subband band-limitation constraint. Optimized designs with different guardband
widths, PRB group sizes, and essential design parameters are compared in terms
of interference levels and implementation complexity. Finally, extensive coded
5G radio link simulation results are presented to compare the proposed approach
with other subband-filtered CP-OFDM schemes and time-domain windowing methods,
considering cases with different numerologies or asynchronous transmissions in
adjacent subbands. Also the feasibility of using independent transmitter and
receiver processing for CP-OFDM spectrum control is demonstrated
5GNOW: Challenging the LTE Design Paradigms of Orthogonality and Synchronicity
LTE and LTE-Advanced have been optimized to deliver high bandwidth pipes to
wireless users. The transport mechanisms have been tailored to maximize single
cell performance by enforcing strict synchronism and orthogonality within a
single cell and within a single contiguous frequency band. Various emerging
trends reveal major shortcomings of those design criteria: 1) The fraction of
machine-type-communications (MTC) is growing fast. Transmissions of this kind
are suffering from the bulky procedures necessary to ensure strict synchronism.
2) Collaborative schemes have been introduced to boost capacity and coverage
(CoMP), and wireless networks are becoming more and more heterogeneous
following the non-uniform distribution of users. Tremendous efforts must be
spent to collect the gains and to manage such systems under the premise of
strict synchronism and orthogonality. 3) The advent of the Digital Agenda and
the introduction of carrier aggregation are forcing the transmission systems to
deal with fragmented spectrum. 5GNOW is an European research project supported
by the European Commission within FP7 ICT Call 8. It will question the design
targets of LTE and LTE-Advanced having these shortcomings in mind and the
obedience to strict synchronism and orthogonality will be challenged. It will
develop new PHY and MAC layer concepts being better suited to meet the upcoming
needs with respect to service variety and heterogeneous transmission setups.
Wireless transmission networks following the outcomes of 5GNOW will be better
suited to meet the manifoldness of services, device classes and transmission
setups present in envisioned future scenarios like smart cities. The
integration of systems relying heavily on MTC into the communication network
will be eased. The per-user experience will be more uniform and satisfying. To
ensure this 5GNOW will contribute to upcoming 5G standardization.Comment: Submitted to Workshop on Mobile and Wireless Communication Systems
for 2020 and beyond (at IEEE VTC 2013, Spring
- …