3,121 research outputs found
Recommended from our members
Survey of partitioning techniques in silicon compilation
In the silicon compilation design process, partitioning is usually the first problem to be investigated because partitioning algorithms form the backbone of many algorithms including: system synthesis, processor synthesis, floorplanning, and placement. In this survey, several partitioning techniques will be examined. In addition, this paper will review the partitioning algorithms used by synthesis systems at different design levels
Unifying mesh- and tree-based programmable interconnect
We examine the traditional, symmetric, Manhattan mesh design for field-programmable gate-array (FPGA) routing along with tree-of-meshes (ToM) and mesh-of-trees (MoT) based designs. All three networks can provide general routing for limited bisection designs (Rent's rule with p<1) and allow locality exploitation. They differ in their detailed topology and use of hierarchy. We show that all three have the same asymptotic wiring requirements. We bound this tightly by providing constructive mappings between routes in one network and routes in another. For example, we show that a (c,p) MoT design can be mapped to a (2c,p) linear population ToM and introduce a corner turn scheme which will make it possible to perform the reverse mapping from any (c,p) linear population ToM to a (2c,p) MoT augmented with a particular set of corner turn switches. One consequence of this latter mapping is a multilayer layout strategy for N-node, linear population ToM designs that requires only /spl Theta/(N) two-dimensional area for any p when given sufficient wiring layers. We further show upper and lower bounds for global mesh routes based on recursive bisection width and show these are within a constant factor of each other and within a constant factor of MoT and ToM layout area. In the process we identify the parameters and characteristics which make the networks different, making it clear there is a unified design continuum in which these networks are simply particular regions
Recommended from our members
A new partitioning approach for layout synthesis from register-transfer netlists
Most of the IC today are described and documented using heiarchical netlists. In addition to gates, latches, and flip-flops, these netlists include sliceable register-transfer components such as registers, counters, adders, ALUs, shifters, register files, and multiplexers. Usually, these components are decomposed into basic gates, latches, and flip-flops, and are laid out using standard cells. The standard cell architecture requires excessive routing area, and does not exploit the bit-sliced nature of register-transfer components. In this paper, we present a new sliced-layout architecture to alleviate the preceding problems. We also describe partitioning algorithms that are used to generate the floorplan for this layout architecture. The partitioning algorithms not only select the best suited layout style for each component, but also consider critical paths, I/O pin locations, and connections between blocks. This approach improves the overall area utilization and minimizes the total wire length
A Reuse-based framework for the design of analog and mixed-signal ICs
Despite the spectacular breakthroughs of the semiconductor industry, the ability to design integrated circuits (ICs) under stringent time-to-market (TTM) requirements is lagging behind integration capacity, so far keeping pace with still valid Moore's Law. The resulting gap is threatening with slowing down such a phenomenal growth. The design community believes that it is only by means of powerful CAD tools and design methodologies -and, possibly, a design paradigm shift-that this design gap can be bridged. In this sense, reuse-based design is seen as a promising solution, and concepts such as IP Block, Virtual Component, and Design Reuse have become commonplace thanks to the significant advances in the digital arena. Unfortunately, the very nature of analog and mixed-signal (AMS) design has hindered a similar level of consensus and development. This paper presents a framework for the reuse-based design of AMS circuits. The framework is founded on three key elements: (1) a CAD-supported hierarchical design flow that facilitates the incorporation of AMS reusable blocks, reduces the overall design time, and expedites the management of increasing AMS design complexity; (2) a complete, clear definition of the AMS reusable block, structured into three separate facets or views: the behavioral, structural, and layout facets, the two first for top-down electrical synthesis and bottom-up verification, the latter used during bottom-up physical synthesis; (3) the design for reusability set of tools, methods, and guidelines that, relying on intensive parameterization as well as on design knowledge capture and encapsulation, allows to produce fully reusable AMS blocks. A case study and a functional silicon prototype demonstrate the validity of the paper's proposals.Ministerio de Educación y Ciencia TEC2004-0175
A scalable multi-core architecture with heterogeneous memory structures for Dynamic Neuromorphic Asynchronous Processors (DYNAPs)
Neuromorphic computing systems comprise networks of neurons that use
asynchronous events for both computation and communication. This type of
representation offers several advantages in terms of bandwidth and power
consumption in neuromorphic electronic systems. However, managing the traffic
of asynchronous events in large scale systems is a daunting task, both in terms
of circuit complexity and memory requirements. Here we present a novel routing
methodology that employs both hierarchical and mesh routing strategies and
combines heterogeneous memory structures for minimizing both memory
requirements and latency, while maximizing programming flexibility to support a
wide range of event-based neural network architectures, through parameter
configuration. We validated the proposed scheme in a prototype multi-core
neuromorphic processor chip that employs hybrid analog/digital circuits for
emulating synapse and neuron dynamics together with asynchronous digital
circuits for managing the address-event traffic. We present a theoretical
analysis of the proposed connectivity scheme, describe the methods and circuits
used to implement such scheme, and characterize the prototype chip. Finally, we
demonstrate the use of the neuromorphic processor with a convolutional neural
network for the real-time classification of visual symbols being flashed to a
dynamic vision sensor (DVS) at high speed.Comment: 17 pages, 14 figure
Statistical Power Supply Dynamic Noise Prediction in Hierarchical Power Grid and Package Networks
One of the most crucial high performance systems-on-chip design challenge is to front their power supply noise sufferance due to high frequencies, huge number of functional blocks and technology scaling down. Marking a difference from traditional post physical-design static voltage drop analysis, /a priori dynamic voltage drop/evaluation is the focus of this work. It takes into account transient currents and on-chip and package /RLC/ parasitics while exploring the power grid design solution space: Design countermeasures can be thus early defined and long post physical-design verification cycles can be shortened. As shown by an extensive set of results, a carefully extracted and modular grid library assures realistic evaluation of parasitics impact on noise and facilitates the power network construction; furthermore statistical analysis guarantees a correct current envelope evaluation and Spice simulations endorse reliable result
Recommended from our members
Automatic synthesis of analog layout : a survey
A review of recent research in the automatic synthesis of physical geometry for analog integrated circuits is presented. On introduction, an explanation of the difficulties involved in analog layout as opposed to digital layout is covered. Review of the literature then follows. Emphasis is placed on the exposition of general methods for addressing problems specific to analog layout, with the details of specific systems only being given when they surve to illustrate these methods well. The conclusion discusses problems remaining and offers a prediction as to how technology will evolve to solve them. It is argued that although progress has been and will continue to be made in the automation of analog IC layout, due to fundamental differences in the nature of analog IC design as opposed to digital design, it should not be expected that the level of automation of the former will reach that of the latter any time soon
A procedural method for the efficient implementation of full-custom VLSI designs
An imbedded language system for the layout of very large scale integration (VLSI) circuits is examined. It is shown that through the judicious use of this system, a large variety of circuits can be designed with circuit density and performance comparable to traditional full-custom design methods, but with design costs more comparable to semi-custom design methods. The high performance of this methodology is attributable to the flexibility of procedural descriptions of VLSI layouts and to a number of automatic and semi-automatic tools within the system
- …