Adaptive Sparse Array Beamformer Design by Regularized Complementary Antenna Switching

In this work, we propose a novel strategy of adaptive sparse array beamformer design, referred to as regularized complementary antenna switching (RCAS), to swiftly adapt both array configuration and excitation weights in accordance to the dynamic environment for enhancing interference suppression. In order to achieve an implementable design of array reconfiguration, the RCAS is conducted in the framework of regularized antenna switching, whereby the full array aperture is collectively divided into separate groups and only one antenna in each group is switched on to connect with the processing channel. A set of deterministic complementary sparse arrays with good quiescent beampatterns is first designed by RCAS and full array data is collected by switching among them while maintaining resilient interference suppression. Subsequently, adaptive sparse array tailored for the specific environment is calculated and reconfigured based on the information extracted from the full array data. The RCAS is devised as an exclusive cardinality-constrained optimization, which is reformulated by introducing an auxiliary variable combined with a piece-wise linear function to approximate the $l_0$-norm function. A regularization formulation is proposed to solve the problem iteratively and eliminate the requirement of feasible initial search point. A rigorous theoretical analysis is conducted, which proves that the proposed algorithm is essentially an equivalent transformation of the original cardinality-constrained optimization. Simulation results validate the effectiveness of the proposed RCAS strategy

Sensor Signal and Information Processing II

In the current age of information explosion, newly invented technological sensors and software are now tightly integrated with our everyday lives. Many sensor processing algorithms have incorporated some forms of computational intelligence as part of their core framework in problem solving. These algorithms have the capacity to generalize and discover knowledge for themselves and learn new information whenever unseen data are captured. The primary aim of sensor processing is to develop techniques to interpret, understand, and act on information contained in the data. The interest of this book is in developing intelligent signal processing in order to pave the way for smart sensors. This involves mathematical advancement of nonlinear signal processing theory and its applications that extend far beyond traditional techniques. It bridges the boundary between theory and application, developing novel theoretically inspired methodologies targeting both longstanding and emergent signal processing applications. The topic ranges from phishing detection to integration of terrestrial laser scanning, and from fault diagnosis to bio-inspiring filtering. The book will appeal to established practitioners, along with researchers and students in the emerging field of smart sensors processing

Array Manifold Calibration for Multichannel SAR Sounders

This dissertation demonstrates airborne synthetic aperture radar (SAR) sounder array manifold calibration to improve outcomes in two-dimensional and three-dimensional image formation of ice sheet and glacier subsurfaces. The methodology relies on the creation of snapshot databases that aid in both the identification of calibration pixels as well as the validation of proposed calibration strategies. A parametric estimator of nonlinear SAR sounder manifold parameters is derived given a superset of statistically independent and spatially diverse subsets, assuming knowledge of the manifold model. Both measurements-based and computational electromagnetic modeling (CEM) approaches are pursued in obtaining a parametric representation of the manifold that enables the application of this estimator. The former relies on a principal components based characterization of SAR sounder manifolds. By incorporating a subspace clustering technique to identify pixels with a single dominant source, the algorithm circumvents an assumption of single source observations that underlies the formulation of nonparametric methods and traditionally limits the applicability of these techniques to the SAR sounder problem. Three manifolds are estimated and tested against a nominal manifold model in angle estimation and tomography. Measured manifolds on average reduce angle estimation error by a factor of 4.8 and lower vertical elevation uncertainty of SAR sounder derived digital elevation models by a factor of 3.7. Application of the measured manifolds in angle estimation produces 3-D images with more focused scattering signatures and higher intensity pixels that improve automated surface extraction outcomes. Measured manifolds are studied against Method of Moments predictions of the array's response to plane wave excitation obtained with a detailed model of the sounder's array that includes the airborne platform and fairing housing. CEM manifolds reduce angle estimation uncertainty off nadir on average by a factor of 3 when applied to measurements, providing initial confirmation of the utility of the CEM model in predicting angle estimation performance of the sounder's airborne arrays. The research findings of this dissertation indicate that SAR sounder manifold calibration will significantly increase the scientific value of legacy ice sheet and glacier sounding data sets and lead to optimized designs of future remote sensing instrumentation for surveying the cryosphere

Antenna Systems

This book offers an up-to-date and comprehensive review of modern antenna systems and their applications in the fields of contemporary wireless systems. It constitutes a useful resource of new material, including stochastic versus ray tracing wireless channel modeling for 5G and V2X applications and implantable devices. Chapters discuss modern metalens antennas in microwaves, terahertz, and optical domain. Moreover, the book presents new material on antenna arrays for 5G massive MIMO beamforming. Finally, it discusses new methods, devices, and technologies to enhance the performance of antenna systems

MIMO OFDM Radar-Communication System with Mutual Interference Cancellation

This work describes the OFDM-based MIMO Radar-Communication System, intended for operation in a multiple-user network, especially the automotive sector in the vehicle-to vehicle/infrastructure network. The OFDM signals however are weak towards frequency offsets causing subcarrier misalignment and corrupts the radar estimation and the demodulation of the communication signal. A simple yet effective interference cancellation algorithm is detailed here with real time measurement verification

A Flexible RFIC Architecture for High-Sensitivity Reception and Compressed-Sampling Wideband Detection

Compressed sensing (CS) is a new signal processing approach that has disrupted the Shannon-Nyquist limit based design methodology and has opened promising avenues for building energy-efficient radio frequency integrated circuits (RFICs) for detecting and estimating particular classes (i.e. sparse) of signals. Whether in application domains where naturally occurring signals are sparse or where representations of signals subject to the fidelity limits or configuration settings of the radio equipment are often found to be sparse, the emergence of CS has forced us to re-imagine the radio receiver. While realizing some of the potential benefits promised by theory, CS-RFIC architectures proposed in earlier research were not particularly suitable for mass-market applications. This thesis demonstrates how to take a new signal processing technique all the way to the hardware level. So far, the main focus in literature has been how CS offers a significant advantage for signal processing. This work will show how CS techniques drive novel architectures down to the integrated circuit level. This requires close collaboration between communication system developers, integrated circuit designers and signal processing experts. The trans-disciplinary approach presented here has led to the unification of CS-inspired architectures for wideband signal detection with robust, legacy architectures for high-sensitivity signal reception. The result is a functionally flexible and rapidly reconfigurable CMOS RFIC compactly implemented on silicon with the potential to achieve the cost, size and power targets in mass-market applications. While the focus of this thesis is RF signal finding and reception in frequency, the CS-based RFIC design approach presented here is applicable to a wide range of other applications like direction-of-arrival and range finding. We begin by developing a signal-model driven approach for optimizing the performance of CS RF frontends (RFFEs). We consider sparse multiband signals with supports contained within a frequency span extending from fMIN to fMAX. The resulting quadrature analog-to-information converter (QAIC) is a flexible-bandwidth, blind sub-Nyquist sampling architecture optimized for energy consumption and sensitivity performance. The QAIC addresses key drawbacks of earlier CS RFFE architectures like the modulated wideband converter (MWC) that implement frequency spans extending from 0 to fMAX. While these earlier architectures, a direct implementation of CS signal processing theory, have several beneficial properties, the true cost of their proposed analog frontend significantly diminishes the sensitivity performance and energy savings that CS methods have the potential to deliver. They use periodic pseudo-random bit sequence (PRBS) generators where the clock frequency fPRBS scales up with the maximum signal frequency fMAX. In contrast, fPRBS in the QAIC RFFE scales up with the instantaneous bandwidth IBW, where IBW = ( fMAX − fMIN ). This results in significant performance advantages in terms of energy consumption and sensitivity performance. The QAIC uncouples fPRBS from fMAX by performing wideband quadrature downconversion ahead of analog mixing with PRBSs at an intermediate frequency (IF). However, the dual heterodyne architecture of the QAIC suffers from spurious responses at IF caused by gain and phase imbalance in its wideband downconverter. We then show how the direct RF-to-information converter (DRF2IC) compactly adds CS wideband detection to a direct conversion frequency-translational noise-cancelling (FTNC) receiver by introducing pseudo-random modulation of the local oscillator (LO) signals and by consolidating multiple CS measurements into one hardware branch. The DRF2IC inherits benefits of the FTNC receiver in signal reception mode. In CS wideband detection mode, the DRF2IC inherits key advantages from both the earlier lowpass CS architectures and the QAIC while avoiding the drawbacks of both. It uncouples fPRBS from fMAX in contrast with the MWC. In contrast with the QAIC, the DRF2IC employs a direct conversion RF chain with narrow bandwidth analog components at baseband thereby avoiding frequency-dependent gain and phase imbalance. The DRF2IC chip occupies 0.56mm2 area in 65nm CMOS. In reception mode, it consumes 46.5mW from 1.15V and delivers 40MHz RF bandwidth, 41.5dB conversion gain, 3.6dB noise figure (NF) and -2dBm blocker 1dB compression point (B1dB). In CS wideband detection mode, 66dB operational dynamic range, 40dB instantaneous dynamic range and 1.43GHz instantaneous bandwidth are demonstrated and 6 interferers each 10MHz wide scattered over a 1.27GHz span are detected in 1.2us consuming 58.5mW

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion

Deep Learning Methods for Remote Sensing

Remote sensing is a field where important physical characteristics of an area are exacted using emitted radiation generally captured by satellite cameras, sensors onboard aerial vehicles, etc. Captured data help researchers develop solutions to sense and detect various characteristics such as forest fires, flooding, changes in urban areas, crop diseases, soil moisture, etc. The recent impressive progress in artificial intelligence (AI) and deep learning has sparked innovations in technologies, algorithms, and approaches and led to results that were unachievable until recently in multiple areas, among them remote sensing. This book consists of sixteen peer-reviewed papers covering new advances in the use of AI for remote sensing

Air Force Institute of Technology Research Report 2015

This report summarizes the research activities of the Air Force Institute of Technology’s Graduate School of Engineering and Management. It describes research interests and faculty expertise; lists student theses/dissertations; identifies research sponsors and contributions; and outlines the procedures for contacting the school. Included in the report are: faculty publications, conference presentations, consultations, and funded research projects. Research was conducted in the areas of Aeronautical and Astronautical Engineering, Electrical Engineering and Electro-Optics, Computer Engineering and Computer Science, Systems Engineering and Management, Operational Sciences, Mathematics, Statistics and Engineering Physics

Air Force Institute of Technology Research Report 2015

This report summarizes the research activities of the Air Force Institute of Technology’s Graduate School of Engineering and Management. It describes research interests and faculty expertise; lists student theses/dissertations; identifies research sponsors and contributions; and outlines the procedures for contacting the school. Included in the report are: faculty publications, conference presentations, consultations, and funded research projects. Research was conducted in the areas of Aeronautical and Astronautical Engineering, Electrical Engineering and Electro-Optics, Computer Engineering and Computer Science, Systems Engineering and Management, Operational Sciences, Mathematics, Statistics and Engineering Physics