Deliverable D4.1: VLC modulation schemes

This report presents the analysis of different modulation schemes D4.1 for VLC systems of the VIDAS project. Considering the final prototype design and application, the deliverable D4.1 was projected. The detail analysis of various modulation schemes are carried out and a robust technique based on direct sequence spread spectrum (DSSS) is followed. DSSS technique though necessitates use of high bandwidth while minimizing the effect of noise. Since the final application does not require very high dat a rate of transmission but robustness against the noise (external lights) becomes necessary. The analysis is followed by model development using Matlab/Simulink. The performance of both of these systems are compared and evaluated. Some of the simulation results are presented

The 1992 4th NASA SERC Symposium on VLSI Design

Papers from the fourth annual NASA Symposium on VLSI Design, co-sponsored by the IEEE, are presented. Each year this symposium is organized by the NASA Space Engineering Research Center (SERC) at the University of Idaho and is held in conjunction with a quarterly meeting of the NASA Data System Technology Working Group (DSTWG). One task of the DSTWG is to develop new electronic technologies that will meet next generation electronic data system needs. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The NASA SERC is proud to offer, at its fourth symposium on VLSI design, presentations by an outstanding set of individuals from national laboratories, the electronics industry, and universities. These speakers share insights into next generation advances that will serve as a basis for future VLSI design

Test and Testability of Asynchronous Circuits

The ever-increasing transistor shrinkage and higher clock frequencies are causing serious clock distribution, power management, and reliability issues. Asynchronous design is predicted to have a significant role in tackling these challenges because of its distributed control mechanism and on-demand, rather than continuous, switching activity. Null Convention Logic (NCL) is a robust and low-power asynchronous paradigm that introduces new challenges to test and testability algorithms because 1) the lack of deterministic timing in NCL complicates the management of test timing, 2) all NCL gates are state-holding and even simple combinational circuits show sequential behaviour, and 3) stuck-at faults on gate internal feedback (GIF) of NCL gates do not always cause an incorrect output and therefore are undetectable by automatic test pattern generation (ATPG) algorithms. Existing test methods for NCL use clocked hardware to control the timing of test. Such test hardware could introduce metastability issues into otherwise highly robust NCL devices. Also, existing test techniques for NCL handle the high-statefulness of NCL circuits by excessive incorporation of test hardware which imposes additional area, propagation delay and power consumption. This work, first, proposes a clockless self-timed ATPG that detects all faults on the gate inputs and a share of the GIF faults with no added design for test (DFT). Then, the efficacy of quiescent current (IDDQ) test for detecting GIF faults undetectable by a DFT-less ATPG is investigated. Finally, asynchronous test hardware, including test points, a scan cell, and an interleaved scan architecture, is proposed for NCL-based circuits. To the extent of our knowledge, this is the first work that develops clockless, self-timed test techniques for NCL while minimising the need for DFT, and also the first work conducted on IDDQ test of NCL. The proposed methods are applied to multiple NCL circuits with up to 2,633 NCL gates (10,000 CMOS Boolean gates), in 180 and 45 nm technologies and show average fault coverage of 88.98% for ATPG alone, 98.52% including IDDQ test, and 99.28% when incorporating test hardware. Given that this fault coverage includes detection of GIF faults, our work has 13% higher fault coverage than previous work. Also, because our proposed clockless test hardware eliminates the need for double-latching, it reduces the average area and delay overhead of previous studies by 32% and 50%, respectively

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design

Power Management for Deep Submicron Microprocessors

As VLSI technology scales, the enhanced performance of smaller transistors comes at the expense of increased power consumption. In addition to the dynamic power consumed by the circuits there is a tremendous increase in the leakage power consumption which is further exacerbated by the increasing operating temperatures. The total power consumption of modern processors is distributed between the processor core, memory and interconnects. In this research two novel power management techniques are presented targeting the functional units and the global interconnects. First, since most leakage control schemes for processor functional units are based on circuit level techniques, such schemes inherently lack information about the operational profile of higher-level components of the system. This is a barrier to the pivotal task of predicting standby time. Without this prediction, it is extremely difficult to assess the value of any leakage control scheme. Consequently, a methodology that can predict the standby time is highly beneficial in bridging the gap between the information available at the application level and the circuit implementations. In this work, a novel Dynamic Sleep Signal Generator (DSSG) is presented. It utilizes the usage traces extracted from cycle accurate simulations of benchmark programs to predict the long standby periods associated with the various functional units. The DSSG bases its decisions on the current and previous standby state of the functional units to accurately predict the length of the next standby period. The DSSG presents an alternative to Static Sleep Signal Generation (SSSG) based on static counters that trigger the generation of the sleep signal when the functional units idle for a prespecified number of cycles. The test results of the DSSG are obtained by the use of a modified RISC superscalar processor, implemented by SimpleScalar, the most widely accepted open source vehicle for architectural analysis. In addition, the results are further verified by a Simultaneous Multithreading simulator implemented by SMTSIM. Leakage saving results shows an increase of up to 146% in leakage savings using the DSSG versus the SSSG, with an accuracy of 60-80% for predicting long standby periods. Second, chip designers in their effort to achieve timing closure, have focused on achieving the lowest possible interconnect delay through buffer insertion and routing techniques. This approach, though, taxes the power budget of modern ICs, especially those intended for wireless applications. Also, in order to achieve more functionality, die sizes are constantly increasing. This trend is leading to an increase in the average global interconnect length which, in turn, requires more buffers to achieve timing closure. Unconstrained buffering is bound to adversely affect the overall chip performance, if the power consumption is added as a major performance metric. In fact, the number of global interconnect buffers is expected to reach hundreds of thousands to achieve an appropriate timing closure. To mitigate the impact of the power consumed by the interconnect buffers, a power-efficient multi-pin routing technique is proposed in this research. The problem is based on a graph representation of the routing possibilities, including buffer insertion and identifying the least power path between the interconnect source and set of sinks. The novel multi-pin routing technique is tested by applying it to the ISPD and IBM benchmarks to verify the accuracy, complexity, and solution quality. Results obtained indicate that an average power savings as high as 32% for the 130-nm technology is achieved with no impact on the maximum chip frequency

Design and debugging of multi-step analog to digital converters

With the fast advancement of CMOS fabrication technology, more and more signal-processing functions are implemented in the digital domain for a lower cost, lower power consumption, higher yield, and higher re-configurability. The trend of increasing integration level for integrated circuits has forced the A/D converter interface to reside on the same silicon in complex mixed-signal ICs containing mostly digital blocks for DSP and control. However, specifications of the converters in various applications emphasize high dynamic range and low spurious spectral performance. It is nontrivial to achieve this level of linearity in a monolithic environment where post-fabrication component trimming or calibration is cumbersome to implement for certain applications or/and for cost and manufacturability reasons. Additionally, as CMOS integrated circuits are accomplishing unprecedented integration levels, potential problems associated with device scaling – the short-channel effects – are also looming large as technology strides into the deep-submicron regime. The A/D conversion process involves sampling the applied analog input signal and quantizing it to its digital representation by comparing it to reference voltages before further signal processing in subsequent digital systems. Depending on how these functions are combined, different A/D converter architectures can be implemented with different requirements on each function. Practical realizations show the trend that to a first order, converter power is directly proportional to sampling rate. However, power dissipation required becomes nonlinear as the speed capabilities of a process technology are pushed to the limit. Pipeline and two-step/multi-step converters tend to be the most efficient at achieving a given resolution and sampling rate specification. This thesis is in a sense unique work as it covers the whole spectrum of design, test, debugging and calibration of multi-step A/D converters; it incorporates development of circuit techniques and algorithms to enhance the resolution and attainable sample rate of an A/D converter and to enhance testing and debugging potential to detect errors dynamically, to isolate and confine faults, and to recover and compensate for the errors continuously. The power proficiency for high resolution of multi-step converter by combining parallelism and calibration and exploiting low-voltage circuit techniques is demonstrated with a 1.8 V, 12-bit, 80 MS/s, 100 mW analog to-digital converter fabricated in five-metal layers 0.18-µm CMOS process. Lower power supply voltages significantly reduce noise margins and increase variations in process, device and design parameters. Consequently, it is steadily more difficult to control the fabrication process precisely enough to maintain uniformity. Microscopic particles present in the manufacturing environment and slight variations in the parameters of manufacturing steps can all lead to the geometrical and electrical properties of an IC to deviate from those generated at the end of the design process. Those defects can cause various types of malfunctioning, depending on the IC topology and the nature of the defect. To relive the burden placed on IC design and manufacturing originated with ever-increasing costs associated with testing and debugging of complex mixed-signal electronic systems, several circuit techniques and algorithms are developed and incorporated in proposed ATPG, DfT and BIST methodologies. Process variation cannot be solved by improving manufacturing tolerances; variability must be reduced by new device technology or managed by design in order for scaling to continue. Similarly, within-die performance variation also imposes new challenges for test methods. With the use of dedicated sensors, which exploit knowledge of the circuit structure and the specific defect mechanisms, the method described in this thesis facilitates early and fast identification of excessive process parameter variation effects. The expectation-maximization algorithm makes the estimation problem more tractable and also yields good estimates of the parameters for small sample sizes. To allow the test guidance with the information obtained through monitoring process variations implemented adjusted support vector machine classifier simultaneously minimize the empirical classification error and maximize the geometric margin. On a positive note, the use of digital enhancing calibration techniques reduces the need for expensive technologies with special fabrication steps. Indeed, the extra cost of digital processing is normally affordable as the use of submicron mixed signal technologies allows for efficient usage of silicon area even for relatively complex algorithms. Employed adaptive filtering algorithm for error estimation offers the small number of operations per iteration and does not require correlation function calculation nor matrix inversions. The presented foreground calibration algorithm does not need any dedicated test signal and does not require a part of the conversion time. It works continuously and with every signal applied to the A/D converter. The feasibility of the method for on-line and off-line debugging and calibration has been verified by experimental measurements from the silicon prototype fabricated in standard single poly, six metal 0.09-µm CMOS process

Design and Optimization for Resilient Energy Efficient Computing

Heutzutage sind moderne elektronische Systeme ein integraler Bestandteil unseres Alltags. Dies wurde unter anderem durch das exponentielle Wachstum der Integrationsdichte von integrierten Schaltkreisen ermöglicht zusammen mit einer Verbesserung der Energieeffizienz, welche in den letzten 50 Jahren stattfand, auch bekannt als Moore‘s Gesetz. In diesem Zusammenhang ist die Nachfrage von energieeffizienten digitalen Schaltkreisen enorm angestiegen, besonders in Anwendungsfeldern wie dem Internet of Things (IoT). Da der Leistungsverbrauch von Schaltkreisen stark mit der Versorgungsspannung verknüpft ist, wurden effiziente Verfahren entwickelt, welche die Versorgungsspannung in den nahen Schwellenspannung-Bereich skalieren, zusammengefasst unter dem Begriff Near-Threshold-Computing (NTC). Mithilfe dieser Verfahren kann eine Erhöhung der Energieeffizienz von Schaltungen um eine ganze Größenordnung ermöglicht werden. Neben der verbesserten Energiebilanz ergeben sich jedoch zahlreiche Herausforderungen was den Schaltungsentwurf angeht. Zum Beispiel führt das Reduzieren der Versorgungsspannung in den nahen Schwellenspannungsbereich zu einer verzehnfachten Erhöhung der Sensibilität der Schaltkreise gegenüber Prozessvariation, Spannungsfluktuationen und Temperaturveränderungen. Die Einflüsse dieser Variationen reduzieren die Zuverlässigkeit von NTC Schaltkreisen und sind ihr größtes Hindernis bezüglich einer umfassenden Nutzung. Traditionelle Ansätze und Methoden aus dem nominalen Spannungsbereich zur Kompensation von Variabilität können nicht effizient angewandt werden, da die starken Performance-Variationen und Sensitivitäten im nahen Schwellenspannungsbereich dessen Kapazitäten übersteigen. Aus diesem Grund sind neue Entwurfsparadigmen und Entwurfsautomatisierungskonzepte für die Anwendung von NTC erforderlich. Das Ziel dieser Arbeit ist die zuvor erwähnten Probleme durch die Bereitstellung von ganzheitlichen Methoden zum Design von NTC Schaltkreisen sowie dessen Entwurfsautomatisierung anzugehen, welche insbesondere auf der Schaltungs- sowie Logik-Ebene angewandt werden. Dabei werden tiefgehende Analysen der Zuverlässigkeit von NTC Systemen miteinbezogen und Optimierungsmethoden werden vorgeschlagen welche die Zuverlässigkeit, Performance und Energieeffizienz verbessern. Die Beiträge dieser Arbeit sind wie folgt: Schaltungssynthese und Timing Closure unter Einbezug von Variationen: Das Einhalten von Anforderungen an das zeitliche Verhalten und Zuverlässigkeit von NTC ist eine anspruchsvolle Aufgabe. Die Auswirkungen von Variabilität kommen bei starken Performance-Schwankungen, welche zu teuren zeitlichen Sicherheitsmargen führen, oder sich in Hold-Time Verstößen ausdrücken, verursacht durch funktionale Störungen, zum Vorschein. Die konventionellen Ansätze beschränken sich dabei alleine auf die Erhöhung von zeitlichen Sicherheitsmargen. Dies ist jedoch sehr ineffizient für NTC, wegen dem starken Ausmaß an Variationen und den erhöhten Leckströmen. In dieser Arbeit wird ein Konzept zur Synthese und Timing Closure von Schaltkreisen unter Variationen vorgestellt, welches sowohl die Sensitivität gegenüber Variationen reduziert als auch die Energieeffizienz, Performance und Zuverlässigkeit verbessert und zugleich den Mehraufwand von Timing Closures [1, 2] verringert. Simulationsergebnisse belegen, dass unser vorgeschlagener Ansatz die Verzögerungszeit um 87% reduziert und die Performance und Energieeffizienz um 25% beziehungsweise 7.4% verbessert, zu Kosten eines erhöhten Flächenbedarfs von 4.8%. Schichtübergreifende Zuverlässigkeits-, Energieeffizienz- und Performance-Optimierung von Datenpfaden: Schichtübergreifende Analyse von Prozessor-Datenpfaden, welche den ganzen Weg spannen vom Kompilierer zum Schaltungsentwurf, kann potenzielle Optimierungsansätze aufzeigen. Ein Datenpfad ist eine Kombination von mehreren funktionalen Einheiten, welche diverse Instruktionen verarbeiten können. Unsere Analyse zeigt, dass die Ausführungszeiten von Instruktionen bei niedrigen Versorgungsspannungen stark variieren, weshalb eine Klassifikation in schnelle und langsame Instruktionen vorgenommen werden kann. Des Weiteren können funktionale Instruktionen als häufig und selten genutzte Instruktionen kategorisiert werden. Diese Arbeit stellt eine Multi-Zyklen-Instruktionen-Methode vor, welche die Energieeffizienz und Belastbarkeit von funktionalen Einheiten erhöhen kann [3]. Zusätzlich stellen wir einen Partitionsalgorithmus vor, welcher ein fein-granulares Power-gating von selten genutzten Einheiten ermöglicht [4] durch Partition von einzelnen funktionalen Einheiten in mehrere kleinere Einheiten. Die vorgeschlagenen Methoden verbessern das zeitliche Schaltungsverhalten signifikant, und begrenzen zugleich die Leckströme beträchtlich, durch Einsatz einer Kombination von Schaltungs-Redesign- und Code-Replacement-Techniken. Simulationsresultate zeigen, dass die entwickelten Methoden die Performance und Energieeffizienz von arithmetisch-logischen Einheiten (ALU) um 19% beziehungsweise 43% verbessern. Des Weiteren kann der Zuwachs in Performance der optimierten Schaltungen in eine Verbesserung der Zuverlässigkeit umgewandelt werden [5, 6]. Post-Fabrication und Laufzeit-Tuning: Prozess- und Laufzeitvariationen haben einen starken Einfluss auf den Minimum Energy Point (MEP) von NTC-Schaltungen, welcher mit der energieeffizientesten Versorgungsspannung assoziiert ist. Es ist ein besonderes Anliegen, die NTC-Schaltung nach der Herstellung (post-fabrication) so zu kalibrieren, dass sich die Schaltung im MEP-Zustand befindet, um die beste Energieeffizient zu erreichen. In dieser Arbeit, werden Post-Fabrication und Laufzeit-Tuning vorgeschlagen, welche die Schaltung basierend auf Geschwindigkeits- und Leistungsverbrauch-Messungen nach der Herstellung auf den MEP kalibrieren. Die vorgestellten Techniken ermitteln den MEP per Chip-Basis um den Einfluss von Prozessvariationen mit einzubeziehen und dynamisch die Versorgungsspannung und Frequenz zu adaptieren um zeitabhängige Variationen wie Workload und Temperatur zu adressieren. Zu diesem Zweck wird in die Firmware eines Chips ein Regression-Modell integriert, welches den MEP basierend auf Workload- und Temperatur-Messungen zur Laufzeit extrahiert. Das Regressions-Modell ist für jeden Chip einzigartig und basiert lediglich auf Post-Fabrication-Messungen. Simulationsergebnisse zeigen das der entwickelte Ansatz eine sehr hohe prognostische Treffsicherheit und Energieeffizienz hat, ähnlich zu hardware-implementierten Methoden, jedoch ohne hardware-seitigen Mehraufwand [7, 8]. Selektierte Flip-Flop Optimierung: Ultra-Low-Voltage Schaltungen müssen im nominalen Versorgungsspannungs-Mode arbeiten um zeitliche Anforderungen von laufenden Anwendungen zu erfüllen. In diesem Fall ist die Schaltung von starken Alterungsprozessen betroffen, welche die Transistoren durch Erhöhung der Schwellenspannungen degradieren. Unsere tiefgehenden Analysen haben gezeigt das gewisse Flip-Flop-Architekturen von diesen Alterungserscheinungen beeinflusst werden indem fälschlicherweise konstante Werte ( \u270\u27 oder \u271\u27) für eine lange Zeit gespeichert sind. Im Vergleich zu anderen Komponenten sind Flip-Flops sensitiver zu Alterungsprozessen und versagen unter anderem dabei einen neuen Wert innerhalb des vorgegebenen zeitlichen Rahmens zu übernehmen. Außerdem kann auch ein geringfügiger Spannungsabfall zu diesen zeitlichen Verstößen führen, falls die betreffenden gealterten Flip-Flops zum kritischen Pfad zuzuordnen sind. In dieser Arbeit wird eine selektiver Flip-Flop-Optimierungsmethode vorgestellt, welche die Schaltungen bezüglich Robustheit gegen statische Alterung und Spannungsabfall optimieren. Dabei werden zuerst optimierte robuste Flip-Flops generiert und diese dann anschließend in die Standard-Zellen-Bibliotheken integriert. Flip-Flops, die in der Schaltung zum kritischen Pfad gehören und Alterung sowie Spannungsabfall erfahren, werden durch die optimierten robusten Versionen ersetzt, um das Zeitverhalten und die Zuverlässigkeit der Schaltung zu verbessern [9, 10]. Simulationsergebnisse zeigen, dass die erwartete Lebenszeit eines Prozessors um 37% verbessert werden kann, während Leckströme um nur 0.1% erhöht werden. Während NTC das Potenzial hat große Energieeffizienz zu ermöglichen, ist der Einsatz in neue Anwendungsfeldern wie IoT wegen den zuvor erwähnten Problemen bezüglich der hohen Sensitivität gegenüber Variationen und deshalb mangelnder Zuverlässigkeit, noch nicht durchsetzbar. In dieser Dissertation und in noch nicht publizierten Werken [11–17], stellen wir Lösungen zu diesen Problemen vor, die eine Integration von NTC in heutige Systeme ermöglichen

Implementing Energy Parsimonious Circuits through Inexact Designs

Inexact Circuits or circuits in which accuracy of the output can be traded for cost (energy, delay and/or area) savings, have been receiving increasing attention of late due to invariable inaccuracies in nanometer-scale circuits and a concomitant growing desire for ultra low energy embedded systems. Most of the previous approaches to realize inexact circuits relied on scaling of circuit-level operational parameters (such as supply voltage) to achieve the cost and accuracy tradeoffs, and suffered from serious drawbacks of significant implementation overheads that drastically reduced the gains. In this thesis, two novel architecture-level approaches called Probabilisttc Pruning and Probabilistic Logic Minimization are proposed to realize inexact circuits with zero overhead. Extensive simulations on various architectures of datapath elements and a prototype chip fabrication demonstrate that normalized gains as large as 2X-9.5X in Energy-Delay-Area product can be obtained for relative error as low as 10 -6 % - 1% compared to corresponding conventional correct designs

Parametric Yield of VLSI Systems under Variability: Analysis and Design Solutions

Variability has become one of the vital challenges that the designers of integrated circuits encounter. variability becomes increasingly important. Imperfect manufacturing process manifest itself as variations in the design parameters. These variations and those in the operating environment of VLSI circuits result in unexpected changes in the timing, power, and reliability of the circuits. With scaling transistor dimensions, process and environmental variations become significantly important in the modern VLSI design. A smaller feature size means that the physical characteristics of a device are more prone to these unaccounted-for changes. To achieve a robust design, the random and systematic fluctuations in the manufacturing process and the variations in the environmental parameters should be analyzed and the impact on the parametric yield should be addressed. This thesis studies the challenges and comprises solutions for designing robust VLSI systems in the presence of variations. Initially, to get some insight into the system design under variability, the parametric yield is examined for a small circuit. Understanding the impact of variations on the yield at the circuit level is vital to accurately estimate and optimize the yield at the system granularity. Motivated by the observations and results, found at the circuit level, statistical analyses are performed, and solutions are proposed, at the system level of abstraction, to reduce the impact of the variations and increase the parametric yield. At the circuit level, the impact of the supply and threshold voltage variations on the parametric yield is discussed. Here, a design centering methodology is proposed to maximize the parametric yield and optimize the power-performance trade-off under variations. In addition, the scaling trend in the yield loss is studied. Also, some considerations for design centering in the current and future CMOS technologies are explored. The investigation, at the circuit level, suggests that the operating temperature significantly affects the parametric yield. In addition, the yield is very sensitive to the magnitude of the variations in supply and threshold voltage. Therefore, the spatial variations in process and environmental variations make it necessary to analyze the yield at a higher granularity. Here, temperature and voltage variations are mapped across the chip to accurately estimate the yield loss at the system level. At the system level, initially the impact of process-induced temperature variations on the power grid design is analyzed. Also, an efficient verification method is provided that ensures the robustness of the power grid in the presence of variations. Then, a statistical analysis of the timing yield is conducted, by taking into account both the process and environmental variations. By considering the statistical profile of the temperature and supply voltage, the process variations are mapped to the delay variations across a die. This ensures an accurate estimation of the timing yield. In addition, a method is proposed to accurately estimate the power yield considering process-induced temperature and supply voltage variations. This helps check the robustness of the circuits early in the design process. Lastly, design solutions are presented to reduce the power consumption and increase the timing yield under the variations. In the first solution, a guideline for floorplaning optimization in the presence of temperature variations is offered. Non-uniformity in the thermal profiles of integrated circuits is an issue that impacts the parametric yield and threatens chip reliability. Therefore, the correlation between the total power consumption and the temperature variations across a chip is examined. As a result, floorplanning guidelines are proposed that uses the correlation to efficiently optimize the chip's total power and takes into account the thermal uniformity. The second design solution provides an optimization methodology for assigning the power supply pads across the chip for maximizing the timing yield. A mixed-integer nonlinear programming (MINLP) optimization problem, subject to voltage drop and current constraint, is efficiently solved to find the optimum number and location of the pads

Design Techniques for Energy-Quality Scalable Digital Systems

Energy efficiency is one of the key design goals in modern computing. Increasingly complex tasks are being executed in mobile devices and Internet of Things end-nodes, which are expected to operate for long time intervals, in the orders of months or years, with the limited energy budgets provided by small form-factor batteries. Fortunately, many of such tasks are error resilient, meaning that they can toler- ate some relaxation in the accuracy, precision or reliability of internal operations, without a significant impact on the overall output quality. The error resilience of an application may derive from a number of factors. The processing of analog sensor inputs measuring quantities from the physical world may not always require maximum precision, as the amount of information that can be extracted is limited by the presence of external noise. Outputs destined for human consumption may also contain small or occasional errors, thanks to the limited capabilities of our vision and hearing systems. Finally, some computational patterns commonly found in domains such as statistics, machine learning and operational research, naturally tend to reduce or eliminate errors. Energy-Quality (EQ) scalable digital systems systematically trade off the quality of computations with energy efficiency, by relaxing the precision, the accuracy, or the reliability of internal software and hardware components in exchange for energy reductions. This design paradigm is believed to offer one of the most promising solutions to the impelling need for low-energy computing. Despite these high expectations, the current state-of-the-art in EQ scalable design suffers from important shortcomings. First, the great majority of techniques proposed in literature focus only on processing hardware and software components. Nonetheless, for many real devices, processing contributes only to a small portion of the total energy consumption, which is dominated by other components (e.g. I/O, memory or data transfers). Second, in order to fulfill its promises and become diffused in commercial devices, EQ scalable design needs to achieve industrial level maturity. This involves moving from purely academic research based on high-level models and theoretical assumptions to engineered flows compatible with existing industry standards. Third, the time-varying nature of error tolerance, both among different applications and within a single task, should become more central in the proposed design methods. This involves designing “dynamic” systems in which the precision or reliability of operations (and consequently their energy consumption) can be dynamically tuned at runtime, rather than “static” solutions, in which the output quality is fixed at design-time. This thesis introduces several new EQ scalable design techniques for digital systems that take the previous observations into account. Besides processing, the proposed methods apply the principles of EQ scalable design also to interconnects and peripherals, which are often relevant contributors to the total energy in sensor nodes and mobile systems respectively. Regardless of the target component, the presented techniques pay special attention to the accurate evaluation of benefits and overheads deriving from EQ scalability, using industrial-level models, and on the integration with existing standard tools and protocols. Moreover, all the works presented in this thesis allow the dynamic reconfiguration of output quality and energy consumption. More specifically, the contribution of this thesis is divided in three parts. In a first body of work, the design of EQ scalable modules for processing hardware data paths is considered. Three design flows are presented, targeting different technologies and exploiting different ways to achieve EQ scalability, i.e. timing-induced errors and precision reduction. These works are inspired by previous approaches from the literature, namely Reduced-Precision Redundancy and Dynamic Accuracy Scaling, which are re-thought to make them compatible with standard Electronic Design Automation (EDA) tools and flows, providing solutions to overcome their main limitations. The second part of the thesis investigates the application of EQ scalable design to serial interconnects, which are the de facto standard for data exchanges between processing hardware and sensors. In this context, two novel bus encodings are proposed, called Approximate Differential Encoding and Serial-T0, that exploit the statistical characteristics of data produced by sensors to reduce the energy consumption on the bus at the cost of controlled data approximations. The two techniques achieve different results for data of different origins, but share the common features of allowing runtime reconfiguration of the allowed error and being compatible with standard serial bus protocols. Finally, the last part of the manuscript is devoted to the application of EQ scalable design principles to displays, which are often among the most energy- hungry components in mobile systems. The two proposals in this context leverage the emissive nature of Organic Light-Emitting Diode (OLED) displays to save energy by altering the displayed image, thus inducing an output quality reduction that depends on the amount of such alteration. The first technique implements an image-adaptive form of brightness scaling, whose outputs are optimized in terms of balance between power consumption and similarity with the input. The second approach achieves concurrent power reduction and image enhancement, by means of an adaptive polynomial transformation. Both solutions focus on minimizing the overheads associated with a real-time implementation of the transformations in software or hardware, so that these do not offset the savings in the display. For each of these three topics, results show that the aforementioned goal of building EQ scalable systems compatible with existing best practices and mature for being integrated in commercial devices can be effectively achieved. Moreover, they also show that very simple and similar principles can be applied to design EQ scalable versions of different system components (processing, peripherals and I/O), and to equip these components with knobs for the runtime reconfiguration of the energy versus quality tradeoff